System of Measurement System of Measurement |
|---|
|
Thread Size Thread Size |
|---|
For Use On For Use On |
|---|
Individual/Set Individual/Set |
|---|
|
Drill Bit Material Drill Bit Material |
|---|
|
Container Type Container Type | Show |
|---|
|
Container Type Container Type | Hide |
|---|
|
Shape Shape |
|---|
 | Hex |
Shank Type Shank Type |
|---|
 |
| Round |
 |
| Hex |
 |
| SDS Plus |
 |
| Quick-Change Hex |
 |
| Square |
 |
| Knurled-End Hex |
 |
| Reversible Hex |
Drill Bit Finish Drill Bit Finish |
|---|
|
Pipe Size Pipe Size |
|---|
Application Application |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Material Material |
|---|
|
Drill Bit Decimal Size Equivalents
More
About Drill Bits
More
About Masonry Drill Bits
More
About Countersinks
Countersinks cut a cone-shaped opening to install screws and rivets flush with a surface or hold workpieces between centers on a lathe. They can also be used for chamfering and deburring.
More
About Counterbores
Counterboring—Enlarge the top of an existing hole to create a cylindrical-shaped opening with a flat bottom that acts as a seat for the head of a screw or wood plug.
More
Maintenance-Length Drill Bit Sets
Also known as mechanics’ bits, these are shorter and more rigid than jobbers' bits but longer than short-length bits. A split point keeps the bit centered without a pilot hole. Their shanks have three flat sides to prevent the bit from slipping in the drill chuck.
For technical drawings and 3-D models, click on a part number.
| Number of Pieces | Drill Bit Sizes Included | Point Style | For Use On | Each | |
Inch | |||||
|---|---|---|---|---|---|
Black-and-Gold-Oxide High-Speed Steel | |||||
| 29 | 1/16"-1/2" (increments of 1/64") | Split | Steel, Iron, Stainless Steel | 00000000 | 0000000 |
Chip-Clearing Drill Bit Sets
Designed to lift chips out of the hole, these bits reduce clogging and improve coolant flow. They’re jobbers’ length, so they have the rigidity and length required for most applications. A split point keeps the bit centered without a pilot hole.
For technical drawings and 3-D models, click on a part number.
| Number of Pieces | Drill Bit Sizes Included | Point Style | For Use On | Each | |
Metric—Spiral Flute | |||||
|---|---|---|---|---|---|
Black-Oxide High-Speed Steel | |||||
| 25 | 1.0-13.0 mm (increments of 0.5 mm) | Split | Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 0000000 | 0000000 |
Quick-Change Carbide Drill Bit Sets
Make fast bit changes—each bit has the same shank diameter, eliminating the need for different collets to hold each size. Harder than high-speed steel, cobalt steel, and carbide-tipped bits, these maintain their sharp edges longer. These bits require rigid toolholding to prevent breakage and should not be used in hand-held drilling applications. All are jobbers’ length so they have the rigidity and length required for most applications. A four-facet point keeps the bit centered without a pilot hole.
For technical drawings and 3-D models, click on a part number.
| Number of Pieces | Drill Bit Sizes Included | Overall Lg. | Shank Size | Point Style | For Use On | Each | |
Inch | |||||||
|---|---|---|---|---|---|---|---|
Uncoated Carbide | |||||||
| 8 | 1/64"-1/8" (increments of 1/64") | 1 1/2" | 1/8" | Four Facet | Steel, Iron, Stainless Steel, Aluminum, Brass, Bronze, Plastic | 0000000 | 000000 |
Wire Gauge | |||||||
Uncoated Carbide | |||||||
| 10 | 80-71 ga | 1 1/2" | 1/8" | Four Facet | Steel, Iron, Stainless Steel, Aluminum, Brass, Bronze, Plastic | 00000000 | 00000 |
| 10 | 70-61 ga | 1 1/2" | 1/8" | Four Facet | Steel, Iron, Stainless Steel, Aluminum, Brass, Bronze, Plastic | 00000000 | 00000 |
Hex-Shank Drill Bit Sets
Insert these bits directly into power screwdrivers, impact drivers, and other tools that accept 1/4" hex shanks. They are titanium nitride (TiN) coated for wear and temperature resistance.
For technical drawings and 3-D models, click on a part number.
| Number of Pieces | Drill Bit Sizes Included | Lg. Class | Shank Type | Shank Size | Point Style | For Use On | Each | |
Inch | ||||||||
|---|---|---|---|---|---|---|---|---|
Titanium-Nitride (TiN) Coated High-Speed Steel | ||||||||
| 10 | 2 of size 1/8" 1 each of sizes 9/64", 5/32", 11/64", 3/16", 7/32", 1/4", 5/16", and 3/8" | Jobbers' Length | Quick-Change Hex | 1/4" | Split | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 000000 |
Round- and Hex-Shank Masonry Drill Bit Sets for Hammer Drills
Drill holes using simultaneous rotary and hammering action to break masonry material into tiny granules. These bits drill faster and penetrate material with less pressure than rotary-only bits. Also known as percussion or impact bits.
Serrated-point drill bits deliver faster, cooler cutting as well as longer life than standard-point masonry drill bits.
For technical drawings and 3-D models, click on a part number.
| Number of Pieces | Drill Bit Sizes Included | Shank Type | Point Style | Specifications Met | For Use On | Each | |
Inch | |||||||
|---|---|---|---|---|---|---|---|
Uncoated Carbide-Tipped Steel | |||||||
| 5 | 3/16"; 1/4"; 5/16"; 3/8"; 1/2" | Round | Serrated | ANSI B212.15 | Masonry, Concrete | 0000000 | 000000 |
SDS-Plus-Shank Masonry Drill Bit Sets for Rotary Hammers
Drill holes using simultaneous rotary and hammering action to break masonry material into tiny granules. These bits cannot be used with SDS-Max-drive rotary hammers. Drill holes using simultaneous rotary and hammering action. This type of bit drills faster and penetrates material with less pressure than rotary-only bits. Also called percussion or impact bits.
For technical drawings and 3-D models, click on a part number.
| Number of Pieces | Drill Bit Sizes Included | Point Style | Specifications Met | For Use On | Each | |
Inch | ||||||
|---|---|---|---|---|---|---|
Uncoated Carbide-Tipped Steel | ||||||
| 5 | 3/16"; 1/4"; 5/16"; 3/8"; 1/2" | Standard | ANSI B212.15 | Masonry, Concrete | 0000000 | 000000 |
Fast-Cutting Drill Bit Sets for Wood
The screw point draws the bit in, quickly boring holes without applying pressure.
For technical drawings and 3-D models, click on a part number.
| Number of Pieces | Drill Bit Sizes Included | Shank Type | Point Style | For Use On | Includes | Each | |
Inch | |||||||
|---|---|---|---|---|---|---|---|
Black-Oxide Steel | |||||||
| 8 | 1 1/8"; 1 1/4"; 1 1/2"; 1 3/4"; 1"; 2 1/8"; 2 9/16" | Quick-Change Hex | Screw | Wood | 5 1/2" Long Extension | 0000000 | 0000000 |
Multidiameter Drill Bit Sets
Steps with progressively larger diameters let you drill a range of sizes with one bit. Also known as step drills.
For technical drawings and 3-D models, click on a part number.
| Number of Pieces | Drill Bit Sizes Included | Shank Type | Point Style | For Use On | Each | |
Inch | ||||||
|---|---|---|---|---|---|---|
Uncoated High-Speed Steel | ||||||
| 4 | 1 each in sizes 1/8"-1/2", 3/16"-1/2", 3/16"-7/8", 13/16"-1 3/8" | Hex | Standard | Steel, Iron, Aluminum, Brass, Bronze, Plastic | 0000000 | 0000000 |
Cobalt Steel Drill-Point Countersink Sets for Lathe Centers
With more heat and abrasion resistance than high-speed steel, cobalt steel is often used on hard-to-machine materials. The countersinks in this set have a 60° countersink angles that’s compatible with the profile of centers on a lathe. They have a small drill point on the tip for drilling and countersinking holes with the same tool. The drill point creates a small gap that prevents damage to the points of live or dead centers. Turn the countersink around for a sharp cutting edge when one end dulls.
For technical drawings and 3-D models, click on a part number.
60° Countersink Angle | ||||||||
|---|---|---|---|---|---|---|---|---|
| Countersink Trade Size | Number of Pieces | Number of Flutes | Number of Countersinking Ends | Shank Type | For Use On | Container Type | Set | |
Uncoated Cobalt Steel | ||||||||
| 1, 2, 3, 4, 5 | 5 | 2 | 2 | Round | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Plastic Case | 000000 | 000000 |
High-Speed Steel Drill-Point Countersink Sets for Lathe Centers
The 60° countersink angle is compatible with the profile of centers on a lathe. These countersinks have a small drill point on the tip for drilling and countersinking holes with the same tool. The drill point creates a small gap that prevents damage to the points of live or dead centers. Turn the countersink around for a sharp cutting edge when one end dulls.
For technical drawings and 3-D models, click on a part number.
60° Countersink Angle | ||||||||
|---|---|---|---|---|---|---|---|---|
| Countersink Trade Size | Number of Pieces | Number of Flutes | Number of Countersinking Ends | Shank Type | For Use On | Container Type | Set | |
Uncoated High-Speed Steel | ||||||||
| 00000, 0000, 000, 00, 0 | 5 | 2 | 2 | Round | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Plastic Case | 000000 | 000000 |
| 1, 2, 3, 4, 5 | 5 | 2 | 2 | Round | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Plastic Case | 000000 | 00000 |
High-Speed Steel Drill-Point Countersink Sets for Screws
Small drill points let you drill and countersink holes with the same tool. The 82° countersink angle is compatible with the profile of flat- and oval-head inch screws.
For technical drawings and 3-D models, click on a part number.
82° Countersink Angle | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Screw Size | Number of Pieces | Number of Flutes | Number of Countersinking Ends | Shank Type | For Use On | Container Type | Set | |
Uncoated High-Speed Steel | ||||||||
| No. 5, No. 6, No. 8, No. 10, No. 12, 1/4", 5/16", 3/8" | 8 | 2 | 1 | Round | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Plastic Case | 00000000 | 0000000 |
High-Speed Steel Drill-Point Countersink Sets with Two Countersinking Ends for Screws
Turn the countersink around when one end dulls for a sharp cutting edge. The countersinks in these sets have a small drill point on the tip for drilling and countersinking holes with the same tool. The drill point creates a small pilot hole at the bottom of the countersunk hole to facilitate drilling. An 82° countersink angle is compatible with the profile of flat- and oval-head inch screws; a 90° countersink angle is compatible with the profile of flat- and oval-head metric screws and is also good for deburring.
For technical drawings and 3-D models, click on a part number.
| Countersink Trade Size | Number of Pieces | Number of Flutes | Number of Countersinking Ends | Shank Type | For Use On | Container Type | Features | Set | |
82° Countersink Angle | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Uncoated High-Speed Steel | |||||||||
| 1, 2, 3, 4, 5 | 5 | 2 | 2 | Round | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Plastic Case | Built-In Pilot | 000000 | 000000 |
90° Countersink Angle | |||||||||
Uncoated High-Speed Steel | |||||||||
| 1, 2, 3, 4, 5 | 5 | 2 | 2 | Round | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Plastic Case | Built-In Pilot | 000000 | 00000 |
High-Speed Steel Countersink Sets for Screws
Choose fewer flutes for a faster cut or more flutes for a smoother finish. An 82° countersink angle is compatible with the profile of flat- and oval-head inch screws; a 90° countersink angle is compatible with the profile of flat- and oval-head metric screws and is also good for deburring.
TiN (titanium nitride) coated countersinks last longer and withstand more heat than black-oxide coated or uncoated countersinks.
For technical drawings and 3-D models, click on a part number.
| Number of Flutes | Body Dia. Included | Number of Pieces | Number of Countersinking Ends | Shank Type | For Use On | Container Type | Set | |
82° Countersink Angle | ||||||||
|---|---|---|---|---|---|---|---|---|
Titanium Nitride (TiN) Coated High-Speed Steel | ||||||||
| 1 | 1/4", 1/2", 3/4", 1" | 4 | 1 | Round | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Plastic Case | 00000000 | 0000000 |
| 6 | 1/4", 1/2", 3/4", 1" | 4 | 1 | Round | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Plastic Case | 00000000 | 000000 |
90° Countersink Angle | ||||||||
Titanium Nitride (TiN) Coated High-Speed Steel | ||||||||
| 1 | 1/4", 1/2", 3/4", 1" | 4 | 1 | Round | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Plastic Case | 00000000 | 000000 |
| 6 | 1/4", 1/2", 3/4", 1" | 4 | 1 | Round | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Plastic Case | 00000000 | 000000 |
Quick-Change Combination Countersinking Drill and Screwdriver Bit Sets
Fasten differently sized screws with these sets. They save you the effort of switching three separate bits in and out of a power tool, instead letting you flip between a countersinking drill and a screwdriver bit with a single hand. You can also attach your own countersinking drills and screwdriver bits as long as they have a 1/4” hex shank.
Countersinking drills have an 82° angle, allowing inch-sized flat- and oval-head screws to sit flush with the surface.
| No. of Pieces | Includes | Countersink Angle | Countersink Body Dia. | No. of Countersink Flutes | Adapter Hex Shank Size | For Use On | Each | |
Black-Oxide High-Speed Steel Countersink | ||||||||
|---|---|---|---|---|---|---|---|---|
| 11 | 1 Drill-Bit Countersink for 3/32" Drill Bit 1 Drill-Bit Countersink for 7/64" Drill Bit 1 Drill Bit (3/32" Drill Bit Size) 2 Drill Bits (7/64" Drill Bit Size) 1 Phillips No. 1 Screwdriver Bit (1" O'all Lg.) 2 Phillips No. 2 Screwdriver Bits (1" O'all Lg.) 1 Reversible Shaft 1 Adapter 1 Hex L-Key | 82° | 3/8" | 4 | 5/16" | Aluminum, Fiberglass, Plastic, Wood | 0000000 | 000000 |
Metric Size Drill-Point Counterbore Sets
No need for separate tools, these sets have counterbores in various sizes that drill and counterbore holes with enough clearance for socket head cap screws. The longer the counterbore, the thicker the material it can drill.
Diameter | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Sizes Included | Number of Pieces | Body | Shank | Drill Tip | Overall Length | Maximum Hole Drilling Depth | Number of Flutes | Shank Type | For Use On | Container Type | Each | |
Uncoated High-Speed Steel | ||||||||||||
| 3 mm 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 14 mm 16 mm | 9 | 5.95 mm 7.54 mm 9.13 mm 10.71 mm 13.49 mm 16.66 mm 18.75 mm 21.82 mm 24.6 mm | 1/4" 1/4" 5/16" 5/16" 7/16" 1/2" 5/8" 5/8" 5/8" | 3.57 mm 4.36 mm 5.55 mm 6.35 mm 8.73 mm 10.32 mm 12.7 mm 14.68 mm 16.67 mm | 1 9/32" 1 13/32" 1 9/16" 1 5/8" 1 29/32" 2 5/32" 2 9/16" 2 27/32" 3 1/2" | 6.35 mm 7.54 mm 7.94 mm 9.52 mm 11.11 mm 14.29 mm 15.87 mm 16.67 mm 17.46 mm | 2 | Round | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Plastic Case | 00000000 | 0000000 |
Inch Size Drill-Point Counterbore Sets
Keep counterbores in various sizes on hand to drill and counterbore holes with enough clearance for socket head cap screws without changing tools. The longer the counterbore, the thicker the material it can drill.
Diameter | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Sizes Included | Overall Length | Number of Pieces | Body | Shank | Drill Tip | Maximum Hole Drilling Depth | Number of Flutes | Shank Type | For Use On | Container Type | Each | |
Uncoated High-Speed Steel | ||||||||||||
| No. 5 No. 6 No. 8 No. 10 1/4" 5/16" 3/8" 7/16" 1/2" | 1 7/32" 1 7/32" 1 15/32" 1 1/2" 1 3/4" 1 15/16" 2 11/32" 2 1/2" 2 11/16" | 9 | 0.22" 0.242" 0.29" 0.332" 0.406" 0.49" 0.593" 0.687" 0.781" | 1/4" 1/4" 5/16" 5/16" 7/16" 1/2" 5/8" 5/8" 5/8" | 0.138" 0.15" 0.178" 0.2" 0.28" 0.34" 0.406" 0.468" 0.532" | 1/4" 1/4" 0.281" 0.312" 3/8" 3/8" 0.468" 1/2" 0.562" | 2 | Round | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Plastic Case | 00000000 | 0000000 |
| No. 5 No. 6 No. 8 No. 10 1/4" 5/16" 3/8" 7/16" 1/2" | 2" 2" 2 1/4" 2 1/4" 2 3/4" 3" 3 1/2" 4" 4 1/2" | 9 | 0.22" 0.242" 0.29" 0.332" 0.406" 0.49" 0.593" 0.687" 0.781" | 1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" | 0.138" 0.15" 0.178" 0.2" 0.28" 0.34" 0.406" 0.468" 0.532" | 0.414" 0.45" 0.534" 0.6" 0.84" 1.02" 1.218" 1.404" 1.596" | 2 | Round | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Plastic Case | 00000000 | 000000 |
Bit Assortments
These assortments contain general-purpose bits.
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
Hex shank bits for power tools have a groove in the shank and fit directly into power tools without an adapter. They offer more reach for recessed holes and less wobble compared to a hex shank bit used with an adapter.
 |  Hex |  Clutch |  Tamper-Resistant Hex |  | ||
 Phillips |  Slotted |  Torx |  Clutch |  Square | ||
 Drilled Spanner |  Pozidriv® |  Tamper-Resistant Torx |  Torq-Set® |  Tri-Wing® |  External Hex | |
| No. of Pieces | Components Included | Bits Included | Adapters Included | Drive Tools Included | Each | |
1/4" Hex Shank Size—Steel | ||||||
|---|---|---|---|---|---|---|
| 10 | 9 Bits 1 Adapter | Phillips: No. 1, No. 2, No. 3 (1" O'all Lg.) Slotted: 3/16", 7/32", 1/4" (1" O'all Lg.) Hex: 1/8", 5/32", 3/16" (1" O'all Lg.) | 2 3/8" Lg. Bit Adapter for Power Tools | __ | 0000000 | 000000 |
| 11 | 10 Bits 1 Adapter | Phillips: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.) Slotted: 7/32", 1/4", 5/16" (1" O'all Lg.) Torx: T10, T15, T20 (1" O'all Lg.) | 2 3/8" Lg. Bit Adapter for Power Tools | __ | 0000000 | 00000 |
| 27 | 25 Bits 1 Adapter 1 Drive Tool | Phillips: No. 1, No. 2, No. 3 (1" O'all Lg.) Slotted: 5/32", 11/64", 7/32", 1/4", 9/32" (1" O'all Lg.) Hex: 5/64", 3/32", 1/8", 5/32", 3/16" (1" O'all Lg.) Torx: T10, T15, T20, T25, T30, T40 (1" O'all Lg.) Square: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.) Clutch: 1/8", 5/32" (1" O'all Lg.) | 2 1/4" Lg. Bit Adapter for Power Tools | 7 3/4" Lg. Bit Screwdriver | 00000000 | 00000 |
| 29 | 26 Bits 2 Adapters 1 Drive Tool | Phillips: No. 1, No. 3 (1" O'all Lg.)—1 ea. Phillips: No. 2 (1" O'all Lg.)—2 ea. Slotted: 3/16", 1/4", 9/32" (1" O'all Lg.)—1 ea. Hex (Inch): 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" 3/16", 7/32", 1/4", 5/16", 3/8" (1" O'all Lg.)—1 ea. Hex (Metric): 2 mm, 2.5 mm, 3 mm, 4 mm 5 mm, 6 mm, 8 mm (1" O'all Lg.)—1 ea. | 1/4" Male Square Drive × 1/4" Hex Shank Adapter 2 1/8" Lg. Bit Adapter for Power Tools | 7 3/4" Lg. Bit Screwdriver | 00000000 | 00000 |
| 30 | 26 Bits 3 Adapters 1 Drive Tool | Tamper-Resistant Hex: 3/32", 7/64", 1/8", 9/64" 5/32", 3/16", 7/32", 1/4" (1" O'all Lg.) Tamper-Resistant Torx: T9, T10, T15, T20 T25, T27, T30, T40 (1" O'all Lg.) Square: No. 1, No. 2 (1" O'all Lg.) Torq-Set®: No. 5, No. 8 (1" O'all Lg.) Pozidriv®: No. 2 (1" O'all Lg.) Drilled Spanner: No. 6, No. 8 No. 10 (1" O'all Lg.) Tri-Wing®: No. 4, No. 5 (1" O'all Lg.) | 1/8" Male Square Drive × 1/8" Hex Shank Adapter 1/4" Male Square Drive × 1/4" Hex Shank Adapter 2 1/8" Lg. Bit Adapter for Power Tools | 8 3/4" Lg. Bit Screwdriver | 000000 | 00000 |
| 39 | 36 Bits 2 Adapters 1 Drive Tool | Phillips: No. 1, No. 2 (1" O'all Lg.) Slotted: 1/4", 5/16" (1" O'all Lg.) Tamper-Resistant Hex: 5/64", 3/32", 7/64" 1/8", 9/64", 5/32" (1" O'all Lg.) Tamper-Resistant Torx: T8, T10, T15, T20 T25, T27, T30, T40 (1" O'all Lg.) Square: No. 1, No. 2, No. 3 (1" O'all Lg.) Torq-Set®: No. 6, No. 8, No. 10 (1" O'all Lg.) Pozidriv®: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.) Drilled Spanner: No. 4, No. 6, No. 8, No. 10 (1" O'all Lg.) Tri-Wing®: No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.) | 1/4" Female Square Drive × 1/4" Female Hex Adapter 2 1/4" Lg. Bit Adapter for Power Tools | Screwdriver Handle | 0000000 | 00000 |
| 40 | 37 Bits 2 Adapters 1 Drive Tool | Phillips: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea. Slotted: 7/64", 5/32", 7/32" (1" O'all Lg.)—1 ea. Slotted: 9/32" (1" O'all Lg.)—2 ea. Hex (Inch): 5/64", 3/32", 7/64", 1/8", 9/64" 5/32", 3/16", 7/32", 1/4" (1" O'all Lg.)—1 ea. Hex (Metric): 2.5 mm, 3 mm, 4 mm 5 mm, 6 mm (1" O'all Lg.)—1 ea. Torx: T10, T15, T20, T25, T27 T30, T40 (1" O'all Lg.)—1 ea. Square: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea. Pozidriv®: No. 1, No. 2 (1" O'all Lg.)—1 ea. Clutch: 5/32" (1" O'all Lg.)—1 ea. | 1 7/8" Lg. Bit Adapter for Power Tools 1/4" Male Square Drive × 1/4" Hex Shank Adapter | 7 1/2" Lg. Bit Screwdriver | 0000000 | 00000 |
| 51 | 50 Bits 1 Adapter | Phillips: No. 1, No. 2 (1" O'all Lg.)—10 ea. Phillips: No. 3 (1" O'all Lg.)—5 ea. Hex: 5/32" (1" O'all Lg.)—5 ea. Hex: 1/8", 3/16" (1" O'all Lg.)—10 ea. | 2 3/8" Lg. Bit Adapter for Power Tools | __ | 0000000 | 00000 |
| 100 | 96 Bits 4 Adapters | Phillips: No. 0 (1" O'all Lg.)—1 ea. Phillips: No. 1, No. 3 (1" O'all Lg.)—2 ea. Phillips: No. 2 (1" O'all Lg.)—4 ea. Slotted: 3/32", 1/8", 5/32", 3/16", 7/32", 1/4" 9/32", 5/16", 3/8" (1" O'all Lg.)—1 ea. Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64" 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" 5/16", 3/8" (1" O'all Lg.)—1 ea. Hex (Metric): 1.5 mm, 2 mm, 2.5 mm, 3 mm 4 mm, 5 mm, 6 mm, 7 mm, 8 mm (1" O'all Lg.)—1 ea. Tamper-Resistant Hex (Inch): 3/32" 7/64", 1/8", 9/64", 5/32", 3/16", 7/32" 1/4", 5/16" (1" O'all Lg.)—1 ea. Tamper-Resistant Hex (Metric): 2.5 mm, 3 mm 4 mm, 5 mm, 6 mm, 8 mm (1" O'all Lg.)—1 ea. Torx: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27 T30, T40, T45, T50, T55 (1" O'all Lg.)—1 ea. Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15 T20, T25, T27, T30, T40 (1" O'all Lg.)—1 ea. Square: No. 0, No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)—1 ea. Pozidriv®: No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea. Drilled Spanner: No. 4, No. 6, No. 8, No. 10 No. 12, 1/4" (1" O'all Lg.)—1 ea. Screw-In Hook Driver Bit—1 ea. | 1/4" Male Square Drive × 1/4" Hex Shank Adapter (1" O'all Lg.) 1/4" Male Square Drive × 1/4" Hex Shank Adapter (2" O'all Lg.) 2 1/2" Lg. Bit Adapter for Power Tools Bit Adapter for Square Drive Tools | __ | 000000 | 00000 |
1/4" Hex Shank Size and 1/4" Reversible Hex—Steel | ||||||
| 30 | 29 Bits 1 Adapter | Phillips: No. 1, No. 3 (1" O'all Lg.)—2 ea. Phillips: No. 2 (1" O'all Lg.)—7 ea. Reversible Phillips: No. 2 × No. 2 (2 3/8" O'all Lg.)—2 ea. Slotted: 13/64", 15/64", 9/32" (1" O'all Lg.)—1 ea. Reversible Slotted: 15/64" × 15/64" (2 3/8" O'all Lg.)—1 ea. Square: No. 2 (1" O'all Lg.)—5 ea. Square: No. 1, No. 3 (1" O'all Lg.)—1 ea. Reversible Square: No. 2 × No. 2 (2 3/8" O'all Lg.)—1 ea. External Hex: 1/4", 5/16", 3/8" 7/16" (2 5/8" O'all Lg.)—1 ea. | 2 1/4" Lg. Bit Adapter for Power Tools | __ | 00000000 | 00000 |
1/4" Hex Shank Size for Power Tools—Steel | ||||||
| 16 | 12 Bits 4 Adapters | Phillips: No. 1, No. 2 (6" O'all Lg.) Phillips: No. 2, No. 3 (3 1/2" O'all Lg.) Torx: T15, T20 (3 1/2" O'all Lg.) Torx: T20, T25, T27, T30 (6" O'all Lg.) Pozidriv®: No. 2 (3 1/2" O'all Lg.) External Hex: 5/16" (1 5/8" O'all Lg.) | 1/4" Male Square Drive × 1/4" Hex Shank Adapter 3/8" Male Square Drive × 1/4" Hex Shank Adapter 3" Lg. Bit Adapter for Power Tools 6" Lg. Bit Adapter for Power Tools | __ | 0000000 | 00000 |
| 34 | 29 Bits 5 Adapters | Phillips: No. 1, No. 2, No. 3 (2" O'all Lg.) Phillips: No. 1, No. 2, No. 3 (3 1/2" O'all Lg.) Phillips: No. 1, No. 2, No. 3 (6" O'all Lg.) Torx: T8, T9, T10 (2" O'all Lg.) Torx: T15, T20, T25, T27, T30 (6" O'all Lg.) Torx: T15, T20, T25, T30 (3 1/2" O'all Lg.) Pozidriv®: No. 1, No. 2, No. 3 (2" O'all Lg.) Pozidriv®: No. 2 (3 1/2" O'all Lg.) Pozidriv®: No. 2 (6" O'all Lg.) External Hex: 3/8", 1/2" (1 3/4" O'all Lg.) External Hex: 5/16" (1 5/8" O'all Lg.) | 1/4" Male Square Drive × 1/4" Hex Shank Adapter 3/8" Male Square Drive × 1/4" Hex Shank Adapter 1/2" Male Square Drive × 1/4" Hex Shank Adapter 2 3/8" Lg. Bit Adapter for Power Tools | __ | 0000000 | 000000 |
| 50 | 50 Bits | Phillips: No. 0, No. 1, No. 2, No. 3, No. 4 (2" O'all Lg.)—1 ea. Slotted: 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" 9/32", 5/16" (2" O'all Lg.)—1 ea. Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64", 1/8" 9/64", 3/16", 7/32", 1/4" (2" O'all Lg.)—1 ea. Hex (Inch): 5/32" (2" O'all Lg.)—2 ea. Hex (Metric): 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm 6 mm, 8 mm (2" O'all Lg.)—1 ea. Torx: T5, T6, T7, T8, T9, T10, T15, T20, T27 T30, T40 (2" O'all Lg.)—1 ea. Torx: T25 (2" O'all Lg.)—2 ea. Square: No. 0, No. 1, No. 2, No. 3 No. 4 (2" O'all Lg.)—1 ea. | __ | __ | 000000 | 000000 |
1/4" and 5/16" Hex Shank Size—Steel | ||||||
| 35 | 32 Bits 1 Extension 2 Drive Tools | Phillips 1/4" Hex Shank: No. 1, No. 2 (1" O'all Lg.) Slotted 1/4" Hex Shank: 3/16", 1/4", 9/32" (1" O'all Lg.) Hex 1/4" Hex Shank: 5/64", 3/32", 7/64", 1/8" 9/64", 7/32", 1/4" (1" O'all Lg.) Hex 5/16" Hex Shank: 5/32", 3/16" (1 1/4" O'all Lg.) Torx 1/4" Hex Shank: T10, T15, T20, T25, T27 T30 (1" O'all Lg.) Torx 5/16" Hex Shank: T40, T45, T50 (1 1/4" O'all Lg.) Square 1/4" Hex Shank: No. 1, No. 2, No. 3 (1" O'all Lg.) Pozidriv® 1/4" Hex Shank: No. 1, No. 2 (1" O'all Lg.) Clutch 1/4" Hex Shank: 3/32", 1/8", 5/32" 3/16" (1" O'all Lg.) | __ | 5 3/8" Lg. Angled Tight-Clearance Ratcheting Bit Screwdriver 5 1/2" Lg. Tight-Clearance Ratcheting Bit Screwdriver | 00000000 | 000000 |
High-Torque Bit Assortments
Less likely to crack or shatter under high torque than standard bits, these are often used to install machine screws with power tools. Also known as insert bits, they can be used in hand drivers or with a bit adapter in power tools.
For technical drawings and 3-D models, click on a part number.
| Number of Pieces | Components Included | Bits Included | Adapters Included | Material | Container Type | Each | |
1/4" Hex Shank Size | |||||||
|---|---|---|---|---|---|---|---|
| 7 | 6 Bits 1 Adapter | Phillips: No. 1, No. 2 (1" O'all Lg.) Slotted: 7/32", 1/4" (1" O'all Lg.) Pozidriv®: No. 1, No. 2 (1" O'all Lg.) | 2" Lg. Bit Adapter for Power Tools | Diamond-Coated Steel | Plastic Case | 00000000 | 000000 |
Bit Assortments for Impact Drivers
The toughest bits available, these withstand the shock and twisting force of impact drivers. Also known as insert bits, use with a bit adapter in power tools.
| No. of Pieces | Components Included | Bits Included | Adapters Included | Bit-Holding Mechanism | Material | Container Type | Each | |
1/4" Hex Shank Size | ||||||||
|---|---|---|---|---|---|---|---|---|
| 10 | 9 Bits 1 Adapter | Phillips: No. 2 (1" O'all Lg.)—3 ea. Phillips: No. 3 (1" O'all Lg.)—1 ea. Torx: T25 (1" O'all Lg.)—3 ea. Torx: T30, T40 (1" O'all Lg.)—1 ea. | 1/4" Female Hex × 1/4" Male Hex for Power Tools | __ | Diamond-Coated Steel | Plastic Case | 0000000 | 000000 |
| 30 | 29 Bits 1 Adapter | Phillips: No. 1 (1" O'all Lg.)—2 ea. Phillips: No. 2 (1" O'all Lg.)—3 ea. Phillips: No. 3 (1" O'all Lg.)—2 ea. Hex: 3 mm, 4 mm, 5 mm, 6 mm (1" O'all Lg.)—1 ea. Torx: T10, T15 (1" O'all Lg.)—1 ea. Torx: T20, T30, T40 (1" O'all Lg.)—2 ea. Torx: T25 (1" O'all Lg.)—3 ea. Pozidriv®: No. 2 (1" O'all Lg.)—3 ea. Pozidriv®: No. 1, No. 3 (1" O'all Lg.)—2 ea. | 1/4" Female Hex × 1/4" Male Hex for Power Tools | Magnet, Retaining Ring | Diamond-Coated Steel | Plastic Case | 0000000 | 000000 |
Precise-Control Bit Assortments
Bits have a knurled shank that allows finger tightening. For more torque, use with the included ratcheting bit screwdriver. They will not fit in standard bit screwdrivers.
| No. of Pieces | Components Included | Bits Included | Adapters Included | Extensions Included | Drive Tools Included | Material | Each | |
1/4" Knurled-End Hex | ||||||||
|---|---|---|---|---|---|---|---|---|
| 27 | 23 Bits 1 Adapter 1 Extension 2 Drive Tools | Phillips: No. 1, No. 2 (1 3/8" O'all Lg.) Slotted: 3/16", 1/4", 3/8" (1 1/4" O'all Lg.) Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64", 1/8" 9/64", 5/32", 3/16", 7/32", 1/4" (1 1/4" O'all Lg.) Hex (Metric): 1.5 mm, 2 mm, 2.5 mm, 3 mm 4 mm, 5 mm, 6 mm (1 1/4" O'all Lg.) | 1/4" Male Square Drive × 1/4" Hex Shank Adapter | 3 1/2" Lg. Extension | 3 3/4" Lg. Tight-Clearance Ratcheting Bit Screwdriver Screwdriver Handle | Steel | 0000000 | 000000 |
| Size | Each | |
Slotted | ||
|---|---|---|
| 3/16" | 0000000 | 00000 |
| 1/4" | 0000000 | 0000 |
| 3/8" | 0000000 | 0000 |
Phillips | ||
| No. 1 | 0000000 | 0000 |
| No. 2 | 0000000 | 0000 |
Hex | ||
| 0.050" | 0000000 | 0000 |
| 1/16" | 0000000 | 0000 |
| 5/64" | 0000000 | 0000 |
| 3/32" | 0000000 | 0000 |
| 7/64" | 0000000 | 0000 |
| 1/8" | 0000000 | 0000 |
| 9/64" | 0000000 | 0000 |
| 5/32" | 0000000 | 0000 |
| 3/16" | 0000000 | 0000 |
| 7/32" | 0000000 | 0000 |
| 1/4" | 0000000 | 0000 |
| 1.5 mm | 0000000 | 0000 |
| 2 mm | 0000000 | 0000 |
| 2.5 mm | 0000000 | 0000 |
| 3 mm | 0000000 | 0000 |
| 4 mm | 0000000 | 0000 |
| 5 mm | 0000000 | 0000 |
| 6 mm | 0000000 | 0000 |
| For Bit Hex Shank Size | Overall Lg. | Material | Each | |
Knurled-End Hex | ||||
|---|---|---|---|---|
| 1/4" | 3 3/4" | Stainless Steel | 0000000 | 00000 |
Screw-Holding Torx Bit Sets
The slightly tapered tip wedges into the screw recess for a secure hold. These bits are also known as Torx-Align bits.
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
For technical drawings and 3-D models, click on a part number.
| Components Included | Bits Included | Screw-Holding Mechanism | Material | Container Type | Each | |
1/4" Hex Shank Size | ||||||
|---|---|---|---|---|---|---|
| 6 Bits | Torx: T10, T15, T20, T25, T30, T40 (1" O'all Lg.) | Wedge Tip | Steel | Plastic Case | 0000000 | 000000 |
Torx-Plus Bit Sets
The six rounded points fit the star-shaped recess of Torx-Plus of screws. These bits have a similar profile to Torx but are not recommended for use with standard Torx screws.
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
For technical drawings and 3-D models, click on a part number.
| Components Included | Bits Included | Adapters Included | Material | Container Type | Each | |
1/4" Hex Shank Size | ||||||
|---|---|---|---|---|---|---|
| 10 Bits 1 Adapter | Torx Plus: IP7, IP8, IP9, IP10, IP15, IP20, IP27, IP30, IP40 (1" O'all lg.) | 2 3/8" Lg. Bit Adapter for Power Tools | Steel | Plastic Case | 00000000 | 000000 |
Tamper-Resistant Torx Bit Sets
An opening at the tip accommodates the pin in the recess of tamper-resistant Torx screws. These are also known as pin-in-Torx bits
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
For technical drawings and 3-D models, click on a part number.
| Components Included | Bits Included | Material | Container Type | Each | |
1/4" Hex Shank Size | |||||
|---|---|---|---|---|---|
| 7 Bits | Tamper-Resistant Torx: T7, T8, T9, T10, T15, T20, T25 (1" O'all Lg.) | Steel | Plastic Case | 0000000 | 000000 |
Tight-Clearance Ratcheting Bit Screwdrivers
A ratchet mechanism allows you to drive fasteners when there's little space to move the handle.
Style D have a knurled handle you turn with your fingertips. A magnet holds the bit.
Material | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Style | For Bit Hex Shank Size | Number of Sizes | Sizes Included | Overall Lg. | Bit-Holding Mechanism | Bit | Handle | Container Type | Each | |
| D | 1/4" | 4 | Phillips: No. 1, No. 2 Slotted: 1/4" Square Drive: 1/4" | 2 7/8" | Magnet | Steel | Steel | Plastic Case | 00000000 | 000000 |
Tap and Drill Bit Sets
Drill and tap a variety of hole sizes. These taps and drill bits are for use on metal and plastic.
Carbon steel taps are for thread repair and occasional tapping.
Plug-chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper chamfers. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.
| No. of Pieces | Chamfer Type | Tap Sizes Included | No. of Flutes | Drill Bit Sizes Included | Drill Bit Material | Container Type | Includes | Each | |
Uncoated Carbon Steel Taps | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 13 | Plug | 1 each of sizes: 4-40 6-32 8-32 10-24 10-32 1/4"-20 | 3, 4 | 43 ga. 35 ga. 29 ga. 25 ga. 21 ga. 7 ga. | Black Oxide High-Speed Steel | Plastic Case | Tap Wrench | 0000000 | 000000 |
Hex-Shank Tap and Drill Bit Sets for Drills and Screwdrivers
All taps and drill bits have a hex shank for direct connection to tools such as drills and power screwdrivers. They're made of high-speed steel and are for use on most metal and plastic. Taps have a plug chamfer with 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping, but they’ll need space at the bottom of closed-end holes for chips to accumulate.
| No. of Pieces | Chamfer Type | Tap Sizes Included | Overall Lg. | No. of Flutes | Drill Bit Sizes Included | Drill Bit Material | Container Type | Includes | Each | |
Uncoated High-Speed Steel | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 13 | Plug | M3 × 0.5 mm M4 × 0.7 mm M5 × 0.8 mm M6 × 1.0 mm M8 × 1.25 mm M10 × 1.5 mm | 1 19/64" 1 27/64" 1 35/64" 1 37/64" | 3, 4 | 2.5 mm 3.3 mm 4.2 mm 5.0 mm 6.8 mm 8.5 mm | Uncoated High-Speed Steel | Plastic Case | Chuck | 0000000 | 0000000 |
Hex-Shank Combination Drill Bit/Tap Sets for Drills and Screwdrivers
Drill and tap holes in a range of diameters. With a drill bit point to drive into the workpiece, these tools can drill and tap holes in a single step. Connect them directly to drills, power screwdrivers, and other tools that accept a 1/4" hex shank. They're made of high-speed steel and are for use on most metal and plastic. Their spiral flutes keep chips clear by drawing them back toward the tap and out of the hole. Recommended for use in through holes, all have a plug chamfer with 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping.
For technical drawings and 3-D models, click on a part number.
| No. of Pieces | Chamfer Type | Tap Sizes Included | No. of Flutes | Drill Bit Sizes Included | Container Type | Includes | Each | |
Uncoated High-Speed Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| 7 | Plug | M3 × 0.5 mm M4 × 0.7 mm M5 × 0.8 mm M6 × 1.0 mm M8 × 1.25 mm M10 × 1.5 mm | 2 | 3/32" 1/8" 11/64" 13/64" 17/64" 31/64" | Plastic Case | Chuck | 0000000 | 0000000 |
Tap, Die, and Drill Bit Sets
Cut and repair threads and drill holes in many different sizes. Tap and die wrenches are included. The dies are hex shaped for use with conventional wrenches. The taps are made of carbon steel and are recommended for thread repair and occasional tapping.
Taper-chamfer taps have 7-10 chamfered threads at the tip for cutting into the workpiece. They require less torque than other chamfer types, making them a good choice for starting threads and tapping through holes. However, a longer taper means that they cannot thread as close to the bottom of closed-end holes
Plug-chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper chamfers. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.
| No. of Pieces | Tap Sizes Included | Die Sizes Included | Drill Bit Sizes Included | Container Type | Includes | Each | |
Carbon Steel | |||||||
|---|---|---|---|---|---|---|---|
Right-Hand Thread | |||||||
| 117 | 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, and M12 × 1.75 mm | 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, and M12 × 1.75 mm | 5/64", 7/64", 5/32", 1/4", 19/64", 5/16", 21/64", 3/8", 25/64", 13/32", 27/64", 29/64", 43 ga., 39 ga., 36 ga., 30 ga., 29 ga., 25 ga., 21 ga., 20 ga., 16 ga., 9 ga., 7 ga., 3 ga., B, F, H, I, J, O, Q, R, S, U, and Z | Plastic Case | Die Wrench (2), Extractor (5), Tap Wrench (3), Thread Gauge (2) | 00000000 | 0000000 |
Drill/Mill End Mill Sets
These multifunction tools have a 90° pointed tip that allows them to be used for drilling as well as for slotting, profiling, and chamfering cuts. Made of solid carbide, they're harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the end mill from breaking. All are center cutting, allowing plunge cuts into a surface.
For technical drawings and 3-D models, click on a part number.
| Number of Pieces | Includes | Flute Spacing | Helix Angle | Point Angle | For Use On | End Mill Type | Each | |
Uncoated | ||||||||
|---|---|---|---|---|---|---|---|---|
2 Flute | ||||||||
| 3 | 1/4" Mill Dia. × 1/4" Shank Dia. × 2 1/2" O'all Lg. End Mill 3/8" Mill Dia. × 3/8" Shank Dia. × 2 1/2" O'all Lg. End Mill 1/2" Mill Dia. × 1/2" Shank Dia. × 3" O'all Lg. End Mill | Equal | 30° | 90° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 0000000 | 0000000 |
4 Flute | ||||||||
| 3 | 6 mm Mill Dia. × 6 mm Shank Dia. × 50 mm O'all Lg. End Mill 10 mm Mill Dia. × 10 mm Shank Dia. × 70 mm O'all Lg. End Mill 12 mm Mill Dia. × 12 mm Shank Dia. × 74 mm O'all Lg. End Mill | Equal | 30° | 90° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 0000000 | 000000 |