Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'- and maintenance-length drill bits.

The short flutes provide increased rigidity for drilling straighter holes than standard extended-length drill bits.

These jobbers'-length bits have the rigidity and length required for most applications.

Specially-designed flutes keep these bits centered as they drill, resulting in straighter, rounder holes with tighter tolerances. Also known as double-margin drill bits.

The short flutes on these jobbers'-length bits provide increased rigidity for drilling straighter holes.

The parabolic spiral flutes lift chips out of the hole, reducing clogging and improving coolant flow.

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'-length drill bits.

Holes in these bits allow coolant to be run through the tool for more efficient chip evacuation. Use them in CNC machines with coolant-through technology.

The parabolic spiral flutes lift chips out of the hole, reducing clogging and improving coolant flow.

Drill long, straight holes with these bits. Channels in the bit allows coolant to flow through the tool for more efficient chip evacuation. Also known as gun drills.

These jobbers'-length bits have the rigidity and length required for most applications.

Drill safely in flammable environments. Made of Factory Mutual (FM) approved beryllium copper, these bits won’t create sparks that could ignite if they made contact with combustible vapors or residues.

With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.

All have a 1/4"-28 threaded shank which installs directly into the threaded spindle on a compatible drill.

The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers.

Also known as A-taper bits, these fit rotary hammers with a taper-shank chuck.

A more controlled chip removal reduces heat buildup. Use these bits on brittle material such as block and brick.

The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers.

Bore clean, flat bottom holes in soft wood, veneer, and laminates.

Three sharp points allow these bits to drill accurate straight and overlapping holes, even across the grain. Also known as brad-point bits.

These bits are cut to match a wood screw’s thread and diameter, resulting in a perfect fit for a screw. They produce clean edges when cutting soft and hard wood.

Carbide-tipped bits maintain their sharp edges when drilling hard material. They are for use in both hand-held drilling and machine-tool applications.

These jobbers'-length bits have the rigidity and length required for most applications.

Cobalt steel bits are heat resistant and maintain their sharp edges when drilling hard material. They are for use in both hand-held drilling and machine-tool applications.

The spear-shaped point drills smoothly through glass and ceramic.

Because softer metal, like aluminum, brass, and bronze, can clog a bit, the flutes on these bits lift chips out of the hole. Also known as slow-spiral drill bits.

These bits have short flutes and a sturdy construction which prevent snagging that deforms sheet metal and thin-wall tubing.

Multiple cutting edges on the tip allow these bits to drill quickly through natural stone, granite, and other hard, abrasive material.

With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.

With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.

Cobalt steel bits are heat resistant and maintain their sharp edges when drilling hard material. They are for use in both hand-held drilling and machine-tool applications.