Use these cutters with Milwaukee magnetic-base drill presses. They require an arbor adapter (sold separately). Unlike drill bits, these cut only on the periphery of the hole and produce a solid slug. They are also known as annular cutters.

Note: These cutters are not for use with Milwaukee magnetic-base drill presses that have a 1/2" max. drill bit size.

Quickly connect these saws to your drill or drill press with the built-in arbor. Saws have high-speed steel teeth for cutting wood, plastic, and metal. A 1/4" diameter pilot drill is included.

For technical drawings and 3-D models, click on a part number.

Lower cutting depths than standard hole saws make these saws less likely to rip or tear while making smooth, burr-free cuts in sheets. Heat-treated high-speed steel teeth cut through aluminum, brass, bronze, and steel. Use these saws on a drill or drill press. An arbor (sold separately) is required.

Arbors with pilot drill guide your cut.

Arbors with pilot pin require a drilled pilot hole. Spring-loaded pilot pins push out the slug as you cut.

For technical drawings and 3-D models, click on a part number.

Make clean, fast cuts in thin metal and plastic when you use one of these saws with an impact driver. The body widens at the top to prevent the saw from pushing through your workpiece. The built-in arbor has a 1/4” hex shank that makes these saws easy to attach to your impact drill. The included pilot drill has a spring that pushes out the slug.

For technical drawings and 3-D models, click on a part number.

An extra-thick steel body with carbide teeth can cut through stainless steel structural framing and electrical enclosures. The built-in arbor makes these saws easy to attach to a drill or drill press. They come with a pilot drill that has a spring to push out the slug.

For technical drawings and 3-D models, click on a part number.

The carbide teeth on these steel saws cut aluminum, brass, bronze, steel, and plastic sheets and last up to twice as long as high-speed steel teeth. The body widens at the top to prevent the saw from pushing through your workpiece. A built-in arbor makes these saws easy to attach to your drill press. The included pilot drill has a spring that pushes out the slug.

For technical drawings and 3-D models, click on a part number.

An oversized diameter allows for finishing to your exact requirements. Often used for dies, punches, and gauges, O1 tool steel is an oil-hardening material that resists wear and abrasion. These rods and discs are decarb-free for a uniform surface that will consistently accept heat treating.

If you don't see the size you're looking for, please specify a length under additional rod lengths.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

An oversized diameter allows for finishing to your exact requirements. A2 tool steel is more wear resistant than O1 and it keeps a sharper cutting edge. This air-hardening material is widely used for punches, broaches, and dies. These rods and discs are decarb-free for a uniform surface that will consistently accept heat treating.

If you don't see the size you're looking for, please specify a length under additional rod lengths.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

An oversized diameter allows for finishing to your exact requirements. Often made into chisels, rivets, and punches, S7 tool steel can handle repeated impact without fracturing. It is an air-hardening material. These rods and discs are decarb-free for a uniform surface that will consistently accept heat treating.

If you don't see the size you're looking for, please specify a length under additional rod lengths.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

An oversized diameter allows for finishing to your exact requirements. The addition of nickel gives D2 tool steel better wear resistance than A2. This air-hardening material is often used for cutting blades, stamps, and forming dies. These rods and discs are decarb-free for a uniform surface that will consistently accept heat treating.

If you don't see the size you're looking for, please specify a length under additional rod lengths.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.