Individual Drill Bits | McMaster-Carr

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	Specifications Met Specifications Met

NAS

	For Drive Style For Drive Style


Hex	Slotted

Phillips	Torx

Square	External Hex

Pozidriv®	Tri-Wing®

Tamper- Resistant Torx	Drilled Spanner

Tamper- Resistant Hex	Clutch

Torq-Set®	Torx Plus

Triple Square	Tri-Groove

Phillips Terminal Screw	JIS

Tri-Lobe	Tamper- Resistant Pentalobe

Triangle	One Way

Square/Phillips	Tamper- Resistant Square

Double Square	Microstix

Hi-Torque	Pozidriv® Terminal Screw

Mortorq®	Asymmetrical

Mortorq® Super	Frearson

Tamper- Resistant Phillips	Pentagon

RIBE	Pentalobe

	For Drilling Type For Drilling Type

Hammer and Rotary

Rotary Only

	Driver Style Driver Style


Bit	Driver

Shaft	T-Handle

Forward

How can we improve?

9,993 Products

Drill Bit Decimal Size Equivalents

About Drill Bits

Drill Bits

These jobbers'-length bits have the rigidity and length required for most applications.

Short-Length Drill Bits

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'- and maintenance-length drill bits.

Extended-Length Drill Bits

Short-Flute Extended-Length Drill Bits

The short flutes provide increased rigidity for drilling straighter holes than standard extended-length drill bits.

Maintenance-Length Drill Bits

Also known as mechanics' bits, these are shorter and more rigid than jobbers’ bits but longer than short-length bits.

Chip-Clearing Drill Bits

These jobbers'-length bits have the rigidity and length required for most applications.

Extended-Length Chip-Clearing Drill Bits

Drill Bits for Precise Holes

Specially-designed flutes keep these bits centered as they drill, resulting in straighter, rounder holes with tighter tolerances. Also known as double-margin drill bits.

Cobalt Steel Drill Bits

Short-Flute Cobalt Steel Drill Bits

The short flutes on these jobbers'-length bits provide increased rigidity for drilling straighter holes.

Short-Length Cobalt Steel Drill Bits

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'-length drill bits.

Extended-Length Cobalt Steel Drill Bits

Short-Flute Extended-Length Cobalt Steel Drill Bits

The short flutes provide increased rigidity for drilling straighter holes than standard extended-length drill bits.

Chip-Clearing Cobalt Steel Drill Bits

The parabolic spiral flutes lift chips out of the hole, reducing clogging and improving coolant flow.

Carbide Drill Bits

These jobbers'-length bits have the rigidity and length required for most applications.

Short-Length Carbide Drill Bits

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'-length drill bits.

Quick-Change Carbide Drill Bits

Make fast bit changes—all of these bits have the same shank diameter, eliminating the need for different collets to hold each size.

Smooth-Finish Carbide Drill Bits

Three cutting edges instead of the typical two enable these bits to drill holes with a smoother finish than other bits.

Carbide Drill Bits with Coolant Holes

Holes in these bits allow coolant to be run through the tool for more efficient chip evacuation. Use them in CNC machines with coolant-through technology.

Carbide Drill Bits for Precise Holes

Specially-designed flutes keep these bits centered as they drill, resulting in straighter, rounder holes with tighter tolerances. Also known as double-margin drill bits.

Chip-Clearing Carbide Drill Bits

The parabolic spiral flutes lift chips out of the hole, reducing clogging and improving coolant flow.

Extended-Length Carbide-Tipped Drill Bits

Extended-Length Carbide-Tipped
Drill Bits with Coolant Holes

Drill long, straight holes with these bits. Channels in the bit allows coolant to flow through the tool for more efficient chip evacuation. Also known as gun drills.

Short-Flute Extended-Length Carbide-Tipped Drill Bits

The short flutes provide increased rigidity for drilling straighter holes than standard extended-length drill bits.

Carbide-Tipped Drill Bits

These jobbers'-length bits have the rigidity and length required for most applications.

Short-Length Carbide-Tipped Drill Bits

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'-length drill bits.

Nonsparking Drill Bits

Drill safely in flammable environments. Made of Factory Mutual (FM) approved beryllium copper, these bits won’t create sparks that could ignite if they made contact with combustible vapors or residues.

1/2" Diameter Reduced-Shank Drill Bits

Extended-Length 1/2" Diameter
Reduced-Shank Drill Bits

Access hard-to-reach spots and drill deep holes.

Cobalt Steel 1/2" Diameter Reduced-Shank Drill Bits

With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.

Carbide-Tipped 1/2" Diameter Reduced-Shank Drill Bits

More wear resistant than cobalt steel and high-speed steel, carbide-tipped bits maintain a sharper, harder edge at high temperatures for excellent performance on abrasive material, such as plastic. Because they aren’t as brittle as solid carbide bits, they can be used in less rigid setups, such as a hand-held drill.

High-Speed Steel 3/4" Diameter
Reduced-Shank Drill Bits

Use these bits for general purpose drilling in most material.

Cobalt Steel 3/4" Diameter Reduced-Shank Drill Bits

With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.

1/4" Diameter Reduced-Shank Drill Bits

3/8" Diameter Reduced-Shank Drill Bits

High-Speed Steel Morse Taper-Shank Drill Bits

Use these bits for general purpose drilling in most material.

Cobalt Steel Morse Taper-Shank Drill Bits

With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.

Hex-Shank Drill Bits

Insert these bits directly into power screwdrivers, impact drivers, and other tools that accept 1/4" hex shanks.

Threaded-Shank Drill Bits

All have a 1/4"-28 threaded shank which installs directly into the threaded spindle on a compatible drill.

Cobalt Steel Hex-Shank Drill Bits

In addition to resisting heat and wear better than high-speed steel drill bits, these can also run up to 25% faster and have a longer tool life. Insert them into power screwdrivers, impact drivers, and other tools that accept hex shanks.

SDS-Plus-Shank Masonry Drill Bits for Rotary Hammers

The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers.

Round- and Hex-Shank Masonry
Drill Bits for Hammer Drills

These bits have a round or hex shank that fits into the three-jaw chuck on a hammer drill.

SDS-Max-Shank Masonry Drill Bits for Rotary Hammers

Drill holes up to 1 1/2" in diameter.

Changeable-Size SDS-Max-Shank Masonry
Core Drill Bits for Rotary Hammers

These bits allow you to easily switch to another size by changing only the bit body. They are hollow and cut with their outside edge for drilling holes larger than 1 1/2" in diameter.

SDS-Max-Shank Masonry Core
Drill Bits for Rotary Hammers

These hollow bits cut with their outside edge for drilling holes larger than 1 1/2" in diameter.

Spline-Shank Masonry Drill Bits for Rotary Hammers

Drill holes up to 1 1/2" in diameter.

Changeable-Size Spline-Shank Masonry
Core Drill Bits for Rotary Hammers

These bits allow you to easily switch to another size by changing only the bit body. They are hollow and cut with their outside edge for drilling holes larger than 1 1/2" in diameter.

Tapered-Round-Shank Masonry
Drill Bits for Rotary Hammers

Also known as A-taper bits, these fit rotary hammers with a taper-shank chuck.

Round- and Hex-Shank Masonry
Drill Bits for Rotary-Only Drilling

Chip-Clearing Round-Shank Masonry
Drill Bits for Rotary-Only Drilling

A more controlled chip removal reduces heat buildup. Use these bits on brittle material such as block and brick.

Hex-Shank Masonry Drill Bits for Impact Drivers

The 1/4" hex shank allows these bits to be used with standard impact drivers.

Hex-Shank Masonry Core Drill
Bits for Rotary-Only Drilling

These hollow bits cut with their outside edge for drilling holes larger than 1 1/2" in diameter.

Masonry Drill Bits for Drilling Rigs

Use these diamond-coated hollow bits for wet drilling of masonry, concrete, and rebar with a drilling rig.

SDS-Plus-Shank Masonry Drill
Bits for Tapping Screw Installation

The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers.

Round-Shank Masonry Drill Bits
for Tapping Screw Installation

Use these bits with handheld power drills, drill presses, and hammer drills.

Hex-Shank Masonry Drill Bits
for Tapping Screw Installation

Insert these bits directly into power screwdrivers, impact drivers, and other tools that accept 1/4" hex shanks.

SDS-Plus-Shank Masonry Drill Bits for Rebar-Cutting

The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers set to rotary-only mode.

Round-Shank Masonry Drill Bits for Rebar-Cutting

Use these bits with handheld power drills and hammer drills set to rotary-only mode.

SDS-Max-Shank Hollow Masonry
Drill Bits for Dust Containment

The SDS-Max shank has three deep slots and two shallow slots for use with SDS-Max-drive rotary hammers.

SDS-Plus-Shank Hollow Masonry
Drill Bits for Dust Containment

The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers.

Masonry Drill Bits for Anchor Installation

A built-in stop ensures repeatable drilling depths for installing drop-in anchors.

Smooth-Finish Drill Bits for Wood

Bore clean, flat bottom holes in soft wood, veneer, and laminates.

Fast-Cutting Smooth-Finish Drill Bits for Wood

Multiple outlining teeth bore clean, flat-bottom holes without chipping or splintering your surface—even when cutting across the grain. Also known as multispur bits.

Drill Bits for Precise Holes in Wood

Three sharp points allow these bits to drill accurate straight and overlapping holes, even across the grain. Also known as brad-point bits.

Flat-Blade Drill Bits for Wood

Also known as spade bits, these have a centering point and two cutting edges for boring holes in hard and soft wood.

Adjustable-Size Flat-Blade Drill Bits for Wood

Cut a variety of hole sizes with one bit—slide the blade to the desired cutting diameter marked on the bit and then tighten the screw. Use in a drill press; they are not recommended for use with handheld drills.

Chip-Clearing Drill Bits for Wood

An open spiral-flute design clears chips quickly, so these bits can bore smooth, deep holes through construction lumber, railroad ties, and utility poles. Also known as pole or ship auger bits.

Drill Bits for Wood Screws

These bits are cut to match a wood screw’s thread and diameter, resulting in a perfect fit for a screw. They produce clean edges when cutting soft and hard wood.

Fast-Cutting Drill Bits for Wood

The screw point draws the bit in, quickly boring holes without applying pressure.

Carbide Drill Bits for Hardened Steel

Harder, stronger, and more wear resistant than carbide-tipped steel, solid-carbide bits maintain their sharp edges longer. They require rigid toolholding to prevent breakage and should not be used in hand-held drilling applications.

Carbide-Tipped Drill Bits for Hardened Steel

Carbide-tipped bits maintain their sharp edges when drilling hard material. They are for use in both hand-held drilling and machine-tool applications.

Drill Bits for Plastic

The sharp point allows for gradual penetration to reduce friction and eliminate cracking and chipping when drilling in plastic.

Drill Bits for Carbon Fiber, Fiberglass, and Graphite

These jobbers'-length bits have the rigidity and length required for most applications.

Short-Length Drill Bits for Carbon
Fiber, Fiberglass, and Graphite

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'-length drill bits.

Cobalt Steel Drill Bits for Stainless Steel and Nickel

Cobalt steel bits are heat resistant and maintain their sharp edges when drilling hard material. They are for use in both hand-held drilling and machine-tool applications.

Carbide Drill Bits for Stainless Steel and Nickel

Harder, stronger, and more wear resistant than cobalt steel, solid-carbide bits maintain their sharp edges longer. They require rigid toolholding to prevent breakage and should not be used in hand-held drilling applications.

Drill Bits for Glass and Ceramic

The spear-shaped point drills smoothly through glass and ceramic.

Core Drill Bits for Glass and Ceramic

These hollow bits are diamond-tipped for long life and fast cutting speeds. Only for use in drill presses.

Drill Bits for Aluminum, Brass, and Bronze

Because softer metal, like aluminum, brass, and bronze, can clog a bit, the flutes on these bits lift chips out of the hole. Also known as slow-spiral drill bits.

Reversible Drill Bits for Sheet Metal

When one end becomes worn, reverse the bit to use the other end.

Drill Bits for Sheet Metal

These bits have short flutes and a sturdy construction which prevent snagging that deforms sheet metal and thin-wall tubing.

Carbide Drill Bits for Sheet Metal

Harder, stronger, and more wear resistant than high-speed steel, solid-carbide bits maintain their sharp edges longer. They require rigid toolholding to prevent breakage and should not be used in hand-held drilling applications.

Drill Bits for Stone, Granite, and Slate

Multiple cutting edges on the tip allow these bits to drill quickly through natural stone, granite, and other hard, abrasive material.

Drill Bits for Paper and Fabric

These bits have razor-sharp cutting edges for making clean holes in fibrous material.

Left-Hand Drill Bits

High-Speed Steel Left-Hand Drill Bits

Use for drilling in most metal.

Cobalt Steel Left-Hand Drill Bits

With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.

Multidiameter Drill Bits

High-Speed Steel Multidiameter Drill Bits

Use for drilling in most metal.

Cobalt Steel Multidiameter Drill Bits

With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.

Any-Diameter Drill Bits

Place a washer with an ID of the desired hole size over the bit and it acts as a stop to prevent the bit from drilling a larger hole.

Hole-Starting Drill Bits

Carbide Hole-Starting Drill Bits

Cobalt Steel Hole-Starting Drill Bits

Cobalt steel bits are heat resistant and maintain their sharp edges when drilling hard material. They are for use in both hand-held drilling and machine-tool applications.

Drill Bits for Wire Installation

Flexible-Shaft Drill Bits for Wire Installation

The shaft is made of spring steel instead of hardened steel, so it flexes while drilling, allowing you to drill inside walls or between floors.

Drill Bits for Wire Installation

Unlike traditional wire-installing drill bits, you do not need to strip the end of the wire when using one of these bits. After drilling, insert the wire into the bit's hollow shaft and pull through the hole.

Replaceable Carbide-Insert Drill Bits

Use these bits to drill a large number of holes with high precision. When the cutting edges dull, replace the carbide inserts (sold separately) instead of the entire bit.

Drill Bits for Spot Welds

Three drill points allow these bits to separate spot-welded panels without damaging the bottom panel.

Drill Bits for Countersunk Holes

Hex-Shank Drill Bits with Guide for Countersunk Holes

Insert directly into power screwdrivers, impact drivers, and other tools that accept a 1/4" hex shank.

Round-Shank Drill Bits with
Guide for Countersunk Holes

The built-in guide has a beveled tip that fits into countersunk holes in hardware, such as hinges and latches, to center the bit.

Countersinks

High-Speed Steel Drill-Point
Countersinks for Lathe Centers

For general purpose use.

Cobalt Steel Drill-Point Countersinks with
Two Countersinking Ends for Lathe Centers

Cobalt Steel Drill-Point Countersinks for Lathe Centers

For use on hard-to-machine materials, these countersinks are cobalt steel for better heat and abrasion resistance than high-speed steel.

Carbide Drill-Point Countersinks for Lathe Centers

Carbide is harder, stronger, and more wear resistant than cobalt steel and high-speed steel for better performance on hard and abrasive materials.

Bell-Style Drill-Point Countersinks for Lathe Centers

For applications where the workpiece will go through several machining processes, these countersinks bevel the outer edges of the hole and provide an additional 120° chamfer to prevent damage to the center hole.

Radius-Style Drill-Point Countersinks for Lathe Centers

These countersinks create a surface that minimizes contact between the material and the lathe centers to prevent damage and allow for more precise machining.

Starter-Hole-Eliminating Drill-Point
Countersinks for Lathe Centers

No need to create a starter hole—the drill point is incorporated into the countersink flutes.

Starter-Hole-Eliminating Drill-Point Countersinks
with Two Countersinking Ends for Lathe Centers

High-Speed Steel Drill-Point Countersinks for Screws

For general purpose use.

High-Speed Steel Drill-Point Countersinks
with Two Countersinking Ends for Screws

Use in general purpose applications.

Carbide Drill-Point Countersinks with
Two Countersinking Ends for Screws

For excellent performance on hard and abrasive materials, these carbide countersinks are harder, stronger, and more wear resistant than cobalt steel and high-speed steel countersinks.

High-Speed Steel Starter-Hole-Eliminating
Drill-Point Countersinks for Screws

To remove the need for a starter hole, the drill point is incorporated into the countersink flutes.

Carbide Starter-Hole-Eliminating Drill-Point
Countersinks with Two Countersinking Ends for Screws

High-Speed Steel Starter-Hole-Eliminating
Drill-Point Countersinks for Rivets

For general purpose use.

Carbide Starter-Hole-Eliminating Drill-Point
Countersinks with Two Countersinking Ends for Rivets

Carbide is harder, stronger, and more wear resistant than high-speed steel for excellent performance on hard and abrasive materials.

High-Speed Steel Drill-Bit Countersinks for Screws

Use on plastic and most metals.

Carbon Steel Drill-Bit Countersinks for Screws

For use on wood and plastic.

Drill-Bit Countersinks with Drill Bit

These countersinks come attached to a high-speed steel jobbers’ bit.

Countersinking Drill Bits for Screws

Also known as step drill bits. The 82° countersink angle is compatible with the profile of flat- and oval-head inch screws.

Countersinking Drill Bits for Taps

Also called subland drill bits. The 90° countersink angle guides the tap into the hole.

High-Speed Steel Countersinks for Screws

High-Speed Steel Countersinks for Lathe Centers

Quick-Change Combination
Countersinking Drill and Screwdriver Bits

Drill, countersink, and drive screws without switching three separate bits in and out of your power tool.

Counterbores

Counterboring Drill Bits

Often called step drill bits.

Long-Life Counterboring Drill Bits

Also known as subland drill bits, these last longer than standard counterboring drill bits because the diameter stays the same after sharpening.

Oversized Long-Life Counterboring Drill Bits

Often used with screw holes in misaligned sheets or layers of material.

Inch Size Drill-Point Counterbores

Drill and counterbore holes with enough clearance for socket head screws without changing tools.

Metric Size Drill-Point Counterbores

The same tool lets you drill and counterbore holes with enough clearance for socket head screws.

Drill-Bit Counterbores with Drill Bit

These counterbores are attached to a drill bit for drilling and counterboring in a single step.

Drill-Bit Counterbores

For jobbers’ and brad-point drill bits.

Large-Diameter Drill-Bit Counterbores

Also known as multi-spur counterbores, these have two set screws to secure them to a woodworking drill bit.

Drill Press Wood-Plug Cutters

Cut wood plugs to conceal fastener heads in counterbored holes.

Screwdriver Bits

Slotted Bits

Strong and durable, these multipurpose bits are for use with bit screwdrivers. They are often used with power tools to install sheet metal screws.

High-Torque Slotted Bits

Less likely to crack or shatter under high torque than standard bits, these are often used with power tools to install machine screws.

Slotted Bits with Screw Guide

Remove screws in hard-to-reach places. A spring-loaded sleeve guides bits onto the screw head and keeps them from slipping out.

Slotted Bits for Stainless Steel Screws

Protect your stainless steel screws by using a stainless steel bit. If steel flakes off a standard bit and into the recess, it can lead to rust and contamination. These bits eliminate that risk.

Reversible Slotted Bits

Bits have a different size at each end.

Tight-Clearance Slotted Bits

The small-diameter shaft can access screws in narrow recessed holes.

Hex Bits

Strong and durable, these multipurpose bits are for use with bit screwdrivers.

Hex Bits for Impact Drivers

The toughest bits available, these withstand the shock and twisting force of impact drivers.

Ball-End Hex Bits

When you don't have exact alignment between the fastener and the tool, the ball end allows angled entry to turn screws in hard-to-reach areas.

Hex Bits for Stainless Steel Screws

Protect your stainless steel screws by using a stainless steel bit. If steel flakes off a standard bit and into the recess, it can lead to rust and contamination. These bits eliminate that risk.

Ball-End Screw-Holding Hex Bits

When you don't have exact alignment between the fastener and the bit, the ball end allows angled entry to turn screws in hard-to-reach areas. A retaining ring grips inside the recess to hold screws in place.

Screw-Holding Hex Bits

A retaining ring at the tip grips inside the recess to ensure screws won't slip off the bit.

Phillips Bits

Strong and durable, these multipurpose bits are for use with bit screwdrivers. They are often used with power tools to install sheet metal screws.

Phillips Bits for Impact Drivers

The toughest bits available, these withstand the shock and twisting force of impact drivers.

High-Torque Phillips Bits

Less likely to crack or shatter under high torque than standard bits, these are often used with power tools to install machine screws.

Slip-Resistant Phillips Bits

Ribs forged into the wings of these bits grip the screw recess to reduce stripping. They're also known as ACR® bits.

Threaded-Shank Phillips Bits

Thread these bits directly into your driving tool for minimal wobble in assembly applications.

Phillips Bits for Shallow Screw Recesses

A wide tip makes good contact in shallow and coated screw recesses, such as those filled with paint.

Reversible Phillips Bits

Drive screws with both ends of these bits. Use with hand drivers.

Depth-Limiting Phillips Bits

An exterior stop collar prevents fasteners from being driven too deep. Use with soft material such as drywall, wood, and fiberboard.

Phillips Bits with Screw Guide

Remove screws in hard-to-reach places. A spring-loaded sleeve guides bits onto the screw head and keeps them from slipping out.

Tight-Clearance Phillips Bits

The small-diameter shaft can access screws in narrow recessed holes.

Phillips Bits for Stainless Steel Screws

Protect your stainless steel screws by using a stainless steel bit. If steel flakes off a standard bit and into the recess, it can lead to rust and contamination. These bits eliminate that risk.

Tri-Wing® Bits

A three-winged tip fits triangular slotted screw recesses.

Torx Bits

Strong and durable, these multipurpose bits are often used with power tools to install sheet metal screws.

Torx Bits for Impact Drivers

The toughest bits available, these withstand the shock and twisting force of impact drivers.

High-Torque Torx Bits

Less likely to crack or shatter under high torque than standard bits, these are often used with power tools to install machine screws.

Ball-End Torx Bits

When you don't have exact alignment between the fastener and the tool, the ball end allows angled entry to turn screws in hard-to-reach areas.

Screw-Holding Torx Bits

The slightly tapered tip wedges into the screw recess for a secure hold. Also known as Torx-Align bits.

Torx Bits for Stainless Steel Screws

Protect your stainless steel screws by using a stainless steel bit. If steel flakes off a standard bit and into the recess, it can lead to rust and contamination. These bits eliminate that risk.

Reversible Torx Bits

Bits have a different size at each end.

Square Bits

Strong and durable, these multipurpose bits are for use with bit screwdrivers. They're designed for screws with a square recess in the head and are also known as Robertson bits.

Square Bits for Impact Drivers

The toughest bits available, these withstand the shock and twisting force of impact drivers. Designed for screws with a square recess in the head, they are also known as Robertson bits.

Depth-Limiting Square Bits

An exterior stop collar prevents fasteners from being driven too deep. Use with soft materials such as drywall, wood, and fiberboard.

Drill Bit Decimal Size Equivalents

About Drill Bits

Drill Bits

Drill Bits

Short-Length Drill Bits

Extended-Length Drill Bits

Short-Flute Extended-Length Drill Bits

Maintenance-Length Drill Bits

Chip-Clearing Drill Bits

Extended-Length Chip-Clearing Drill Bits

Drill Bits for Precise Holes

Cobalt Steel Drill Bits

Short-Flute Cobalt Steel Drill Bits

Short-Length Cobalt Steel Drill Bits

Extended-Length Cobalt Steel Drill Bits

Short-Flute Extended-Length Cobalt Steel Drill Bits

Chip-Clearing Cobalt Steel Drill Bits

Carbide Drill Bits

Short-Length Carbide Drill Bits

Quick-Change Carbide Drill Bits

Smooth-Finish Carbide Drill Bits

Carbide Drill Bits with Coolant Holes

Carbide Drill Bits for Precise Holes

Chip-Clearing Carbide Drill Bits

Extended-Length Carbide-Tipped Drill Bits

Extended-Length Carbide-TippedDrill Bits with Coolant Holes

Short-Flute Extended-Length Carbide-Tipped Drill Bits

Carbide-Tipped Drill Bits

Short-Length Carbide-Tipped Drill Bits

Nonsparking Drill Bits

1/2" Diameter Reduced-Shank Drill Bits

Extended-Length 1/2" DiameterReduced-Shank Drill Bits

Cobalt Steel 1/2" Diameter Reduced-Shank Drill Bits

Carbide-Tipped 1/2" Diameter Reduced-Shank Drill Bits

High-Speed Steel 3/4" DiameterReduced-Shank Drill Bits

Cobalt Steel 3/4" Diameter Reduced-Shank Drill Bits

1/4" Diameter Reduced-Shank Drill Bits

3/8" Diameter Reduced-Shank Drill Bits

High-Speed Steel Morse Taper-Shank Drill Bits

Cobalt Steel Morse Taper-Shank Drill Bits

Hex-Shank Drill Bits

Threaded-Shank Drill Bits

Cobalt Steel Hex-Shank Drill Bits

SDS-Plus-Shank Masonry Drill Bits for Rotary Hammers

Round- and Hex-Shank MasonryDrill Bits for Hammer Drills

SDS-Max-Shank Masonry Drill Bits for Rotary Hammers

Changeable-Size SDS-Max-Shank MasonryCore Drill Bits for Rotary Hammers

SDS-Max-Shank Masonry CoreDrill Bits for Rotary Hammers

Spline-Shank Masonry Drill Bits for Rotary Hammers

Changeable-Size Spline-Shank MasonryCore Drill Bits for Rotary Hammers

Tapered-Round-Shank MasonryDrill Bits for Rotary Hammers

Round- and Hex-Shank MasonryDrill Bits for Rotary-Only Drilling

Chip-Clearing Round-Shank MasonryDrill Bits for Rotary-Only Drilling

Hex-Shank Masonry Drill Bits for Impact Drivers

Hex-Shank Masonry Core DrillBits for Rotary-Only Drilling

Masonry Drill Bits for Drilling Rigs

SDS-Plus-Shank Masonry DrillBits for Tapping Screw Installation

Round-Shank Masonry Drill Bitsfor Tapping Screw Installation

Hex-Shank Masonry Drill Bitsfor Tapping Screw Installation

SDS-Plus-Shank Masonry Drill Bits for Rebar-Cutting

Round-Shank Masonry Drill Bits for Rebar-Cutting

SDS-Max-Shank Hollow MasonryDrill Bits for Dust Containment

SDS-Plus-Shank Hollow MasonryDrill Bits for Dust Containment

Masonry Drill Bits for Anchor Installation

Smooth-Finish Drill Bits for Wood

Fast-Cutting Smooth-Finish Drill Bits for Wood

Drill Bits for Precise Holes in Wood

Flat-Blade Drill Bits for Wood

Adjustable-Size Flat-Blade Drill Bits for Wood

Chip-Clearing Drill Bits for Wood

Drill Bits for Wood Screws

Fast-Cutting Drill Bits for Wood

Carbide Drill Bits for Hardened Steel

Carbide-Tipped Drill Bits for Hardened Steel

Drill Bits for Plastic

Drill Bits for Carbon Fiber, Fiberglass, and Graphite

Short-Length Drill Bits for CarbonFiber, Fiberglass, and Graphite

Cobalt Steel Drill Bits for Stainless Steel and Nickel

Carbide Drill Bits for Stainless Steel and Nickel

Drill Bits for Glass and Ceramic

Extended-Length Carbide-Tipped
Drill Bits with Coolant Holes

Extended-Length 1/2" Diameter
Reduced-Shank Drill Bits

High-Speed Steel 3/4" Diameter
Reduced-Shank Drill Bits

Round- and Hex-Shank Masonry
Drill Bits for Hammer Drills

Changeable-Size SDS-Max-Shank Masonry
Core Drill Bits for Rotary Hammers

SDS-Max-Shank Masonry Core
Drill Bits for Rotary Hammers

Changeable-Size Spline-Shank Masonry
Core Drill Bits for Rotary Hammers

Tapered-Round-Shank Masonry
Drill Bits for Rotary Hammers

Round- and Hex-Shank Masonry
Drill Bits for Rotary-Only Drilling

Chip-Clearing Round-Shank Masonry
Drill Bits for Rotary-Only Drilling

Hex-Shank Masonry Core Drill
Bits for Rotary-Only Drilling

SDS-Plus-Shank Masonry Drill
Bits for Tapping Screw Installation

Round-Shank Masonry Drill Bits
for Tapping Screw Installation

Hex-Shank Masonry Drill Bits
for Tapping Screw Installation

SDS-Max-Shank Hollow Masonry
Drill Bits for Dust Containment

SDS-Plus-Shank Hollow Masonry
Drill Bits for Dust Containment

Short-Length Drill Bits for Carbon
Fiber, Fiberglass, and Graphite

Round-Shank Drill Bits with
Guide for Countersunk Holes

High-Speed Steel Drill-Point
Countersinks for Lathe Centers

Cobalt Steel Drill-Point Countersinks with
Two Countersinking Ends for Lathe Centers

Starter-Hole-Eliminating Drill-Point
Countersinks for Lathe Centers

Starter-Hole-Eliminating Drill-Point Countersinks
with Two Countersinking Ends for Lathe Centers

High-Speed Steel Drill-Point Countersinks
with Two Countersinking Ends for Screws

Carbide Drill-Point Countersinks with
Two Countersinking Ends for Screws

High-Speed Steel Starter-Hole-Eliminating
Drill-Point Countersinks for Screws

Carbide Starter-Hole-Eliminating Drill-Point
Countersinks with Two Countersinking Ends for Screws

High-Speed Steel Starter-Hole-Eliminating
Drill-Point Countersinks for Rivets

Carbide Starter-Hole-Eliminating Drill-Point
Countersinks with Two Countersinking Ends for Rivets

Quick-Change Combination
Countersinking Drill and Screwdriver Bits