These jobbers'-length bits have the rigidity and length required for most applications. The flutes are designed to lift chips out of the hole, reducing clogging and improving coolant flow.

For technical drawings and 3-D models, click on a part number.

These jobbers'-length bits have the rigidity and length required for most applications. Made of cobalt steel, which has better heat and wear resistance than high-speed steel, they can run up to 25% faster and have a longer tool life.

Titanium-nitride (TiN) coated drill bits last longer and can drill at higher speeds than uncoated drill bits.

Titanium-aluminum-nitride (TiAlN) coated drill bits are the most wear and temperature resistant for the longest life and highest drilling speeds.

Drill bits with a split point keep centered without a pilot hole.

For technical drawings and 3-D models, click on a part number.

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'-length drill bits. Made of cobalt steel, which has better heat and wear resistance than high-speed steel, they can run up to 25% faster and have a longer tool life.

Titanium-nitride (TiN) coated drill bits last longer and can drill at higher speeds than uncoated drill bits.

Drill bits with a split point keep centered without a pilot hole.

For technical drawings and 3-D models, click on a part number.

Because softer metal, like aluminum, brass, and bronze, can clog a bit, the flutes on these bits lift chips out of the hole. Also known as slow-spiral drill bits. They are jobbers' length and have the rigidity and length required for most applications.

For technical drawings and 3-D models, click on a part number.

Also known as reverse-flute bits, the flutes spiral in the opposite direction of other bits. Use in counterclockwise drilling applications such as removing broken screws. These bits are jobbers' length and have the rigidity and length required for most applications.

For technical drawings and 3-D models, click on a part number.

Attach one of these counterbores to a standard jobbers’ or brad-point drill bit (sold separately) to convert it into a counterboring drill bit. Lock the counterbore into position on the drill bit with the two set screws.

Optional collar (not included) controls the cutting depth of your counterbore. It attaches with two set screws.

For technical drawings and 3-D models, click on a part number.

Also known as Reed and Prince bits.

Hex shank bits (also called insert bits) are used in hand drivers or with a bit adapter in power tools.

For technical drawings and 3-D models, click on a part number.

Lock your bit into the adapter to prevent accidental disengagement. These adapters fit square-drive tools and accept hex-shank screwdriver bits. They have nonmagnetic bit holders, so they won’t attract loose metal parts and shavings.

To secure a bit in twist-lock adapters, tighten the knurled end.

For technical drawings and 3-D models, click on a part number.

Drill and remove broken screws, bolts, and studs with a single tool. After drilling, insert the extractor and turn. The part will back out without damaging the threads around it.

For technical drawings and 3-D models, click on a part number.

Multiple tap sizes allow tapping a range of hole diameters. The taps in these sets connect directly to the included screwdriver and other tools that accept a 1/4" hex shank, such as drills and power screwdrivers. They're made of high-speed steel and are for use on most metal and plastic. With a plug chamfer, they're good for start-to-finish tapping, but they'll require space at the bottom of closed-end holes for chips to accumulate.

For technical drawings and 3-D models, click on a part number.

These rods, also known as drill blanks, have an undersized diameter for machining your own jobbers'-length drill bits. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.