11.38" Drill Bits | McMaster-Carr

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

Forward

How can we improve?

13,832 Products

High-Speed Steel Drill Bits

Drill Bits

These jobbers'-length bits have the rigidity and length required for most applications.

Short-Length Drill Bits

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'- and maintenance-length drill bits.

Extended-Length Drill Bits

Short-Flute Extended-Length Drill Bits

The short flutes provide increased rigidity for drilling straighter holes than standard extended-length drill bits.

Maintenance-Length Drill Bits

Also known as mechanics' bits, these are shorter and more rigid than jobbers’ bits but longer than short‐length bits.

Chip-Clearing Drill Bits

These jobbers'-length bits have the rigidity and length required for most applications.

Extended-Length Chip-Clearing Drill Bits

Drill Bits for Precise Holes

Specially-designed flutes keep these bits centered as they drill, resulting in straighter, rounder holes with tighter tolerances. Also known as double-margin drill bits.

Cobalt Steel Drill Bits

Short-Flute Cobalt Steel Drill Bits

The short flutes on these jobbers'-length bits provide increased rigidity for drilling straighter holes.

Short-Length Cobalt Steel Drill Bits

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'-length drill bits.

Extended-Length Cobalt Steel Drill Bits

Short-Flute Extended-Length Cobalt Steel Drill Bits

The short flutes provide increased rigidity for drilling straighter holes than standard extended-length drill bits.

Chip-Clearing Cobalt Steel Drill Bits

The parabolic spiral flutes lift chips out of the hole, reducing clogging and improving coolant flow.

Carbide Drill Bits

These jobbers'-length bits have the rigidity and length required for most applications.

Short-Length Carbide Drill Bits

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'-length drill bits.

Quick-Change Carbide Drill Bits

Make fast bit changes—all of these bits have the same shank diameter, eliminating the need for different collets to hold each size.

Smooth-Finish Carbide Drill Bits

Three cutting edges instead of the typical two enable these bits to drill holes with a smoother finish than other bits.

Carbide Drill Bits with Coolant Holes

Holes in these bits allow coolant to be run through the tool for more efficient chip evacuation. Use them in CNC machines with coolant-through technology.

Carbide Drill Bits for Precise Holes

Specially-designed flutes keep these bits centered as they drill, resulting in straighter, rounder holes with tighter tolerances. Also known as double-margin drill bits.

Chip-Clearing Carbide Drill Bits

The parabolic spiral flutes lift chips out of the hole, reducing clogging and improving coolant flow.

Carbide-Tipped Drill Bits

Extended-Length Carbide-Tipped Drill Bits

Extended-Length Carbide-Tipped
Drill Bits with Coolant Holes

Drill long, straight holes with these bits. Channels in the bit allows coolant to flow through the tool for more efficient chip evacuation. Also known as gun drills.

Short-Flute Extended-Length Carbide-Tipped Drill Bits

The short flutes provide increased rigidity for drilling straighter holes than standard extended-length drill bits.

Carbide-Tipped Drill Bits

These jobbers'-length bits have the rigidity and length required for most applications.

Short-Length Carbide-Tipped Drill Bits

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'-length drill bits.

Nonsparking Drill Bits

Drill safely in flammable environments. Made of Factory Mutual (FM) approved beryllium copper, these bits won’t create sparks that could ignite if they made contact with combustible vapors or residues.

Reduced Round-Shank Drill Bits

1/2" Diameter Reduced-Shank Drill Bits

Extended-Length 1/2" Diameter
Reduced-Shank Drill Bits

Access hard-to-reach spots and drill deep holes.

Cobalt Steel 1/2" Diameter Reduced-Shank Drill Bits

With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.

Carbide-Tipped 1/2" Diameter Reduced-Shank Drill Bits

More wear resistant than cobalt steel and high-speed steel, carbide-tipped bits maintain a sharper, harder edge at high temperatures for excellent performance on abrasive material, such as plastic. Because they aren’t as brittle as solid carbide bits, they can be used in less rigid setups, such as a hand-held drill.

High-Speed Steel 3/4" Diameter
Reduced-Shank Drill Bits

Use these bits for general purpose drilling in most material.

Cobalt Steel 3/4" Diameter Reduced-Shank Drill Bits

With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.

1/4" Diameter Reduced-Shank Drill Bits

3/8" Diameter Reduced-Shank Drill Bits

Morse Taper-Shank Drill Bits

High-Speed Steel Morse Taper-Shank Drill Bits

Use these bits for general purpose drilling in most material.

Cobalt Steel Morse Taper-Shank Drill Bits

With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.

Hex-Shank Drill Bits

Insert these bits directly into power screwdrivers, impact drivers, and other tools that accept 1/4" hex shanks.

Threaded-Shank Drill Bits

All have a 1/4"-28 threaded shank which installs directly into the threaded spindle on a compatible drill.

Cobalt Steel Hex-Shank Drill Bits

In addition to resisting heat and wear better than high-speed steel drill bits, these can also run up to 25% faster and have a longer tool life. Insert them into power screwdrivers, impact drivers, and other tools that accept hex shanks.

Drill Bits for Masonry

SDS-Plus-Shank Masonry Drill Bits for Rotary Hammers

The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers.

Round- and Hex-Shank Masonry
Drill Bits for Hammer Drills

These bits have a round or hex shank that fits into the three-jaw chuck on a hammer drill.

SDS-Max-Shank Masonry Drill Bits for Rotary Hammers

Drill holes up to 1 1/2" in diameter.

Changeable-Size SDS-Max-Shank Masonry
Core Drill Bits for Rotary Hammers

These bits allow you to easily switch to another size by changing only the bit body. They are hollow and cut with their outside edge for drilling holes larger than 1 1/2" in diameter.

SDS-Max-Shank Masonry Core
Drill Bits for Rotary Hammers

These hollow bits cut with their outside edge for drilling holes larger than 1 1/2" in diameter.

Spline-Shank Masonry Drill Bits for Rotary Hammers

Drill holes up to 1 1/2" in diameter.

Changeable-Size Spline-Shank Masonry
Core Drill Bits for Rotary Hammers

These bits allow you to easily switch to another size by changing only the bit body. They are hollow and cut with their outside edge for drilling holes larger than 1 1/2" in diameter.

Tapered-Round-Shank Masonry
Drill Bits for Rotary Hammers

Also known as A-taper bits, these fit rotary hammers with a taper-shank chuck.

Round- and Hex-Shank Masonry
Drill Bits for Rotary-Only Drilling

Chip-Clearing Round-Shank Masonry
Drill Bits for Rotary-Only Drilling

A more controlled chip removal reduces heat buildup. Use these bits on brittle material such as block and brick.

Hex-Shank Masonry Drill Bits for Impact Drivers

The 1/4" hex shank allows these bits to be used with standard impact drivers.

Hex-Shank Masonry Core Drill
Bits for Rotary-Only Drilling

These hollow bits cut with their outside edge for drilling holes larger than 1 1/2" in diameter.

Masonry Drill Bits for Drilling Rigs

Use these diamond-coated hollow bits for wet drilling of masonry, concrete, and rebar with a drilling rig.

Thread Adapters for Masonry Drill Bits for Drilling Rigs

Adapt a bit for use on a drilling rig with a different thread size.

SDS-Plus-Shank Masonry Drill
Bits for Tapping Screw Installation

The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers.

Round-Shank Masonry Drill Bits
for Tapping Screw Installation

Use these bits with handheld power drills, drill presses, and hammer drills.

Hex-Shank Masonry Drill Bits
for Tapping Screw Installation

Insert these bits directly into power screwdrivers, impact drivers, and other tools that accept 1/4" hex shanks.

Drive Sleeves for Hex-Shank Masonry
Drill Bits for Tapping Screw Installation

Drive a tapping screw without removing the drill bit from your impact driver. One end holds an insert or nutdriver bit, while the other end engages with the hex-collar on the drill bit.

SDS-Plus-Shank Masonry Drill Bits for Rebar-Cutting

The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers set to rotary-only mode.

Round-Shank Masonry Drill Bits for Rebar-Cutting

Use these bits with handheld power drills and hammer drills set to rotary-only mode.

SDS-Max-Shank Hollow Masonry
Drill Bits for Dust Containment

The SDS-Max shank has three deep slots and two shallow slots for use with SDS-Max-drive rotary hammers.

SDS-Plus-Shank Hollow Masonry
Drill Bits for Dust Containment

The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers.

Masonry Drill Bits for Anchor Installation

A built-in stop ensures repeatable drilling depths for installing drop-in anchors.

Drill Bits for Wood

Smooth-Finish Drill Bits for Wood

Bore clean, flat bottom holes in soft wood, veneer, and laminates.

Fast-Cutting Smooth-Finish Drill Bits for Wood

Multiple outlining teeth bore clean, flat-bottom holes without chipping or splintering your surface—even when cutting across the grain. Also known as multispur bits.

Drill Bits for Precise Holes in Wood

Three sharp points allow these bits to drill accurate straight and overlapping holes, even across the grain. Also known as brad-point bits.

Flat-Blade Drill Bits for Wood

Also known as spade bits, these have a centering point and two cutting edges for boring holes in hard and soft wood.

Adjustable-Size Flat-Blade Drill Bits for Wood

Cut a variety of hole sizes with one bit—slide the blade to the desired cutting diameter marked on the bit and then tighten the screw. Use in a drill press; they are not recommended for use with handheld drills.

Chip-Clearing Drill Bits for Wood

An open spiral-flute design clears chips quickly, so these bits can bore smooth, deep holes through construction lumber, railroad ties, and utility poles. Also known as pole or ship auger bits.

Drill Bits for Wood Screws

These bits are cut to match a wood screw’s thread and diameter, resulting in a perfect fit for a screw. They produce clean edges when cutting soft and hard wood.

Fast-Cutting Drill Bits for Wood

The screw point draws the bit in, quickly boring holes without applying pressure.

Drill Bits for Hardened Steel

Carbide Drill Bits for Hardened Steel

Harder, stronger, and more wear resistant than carbide-tipped steel, solid-carbide bits maintain their sharp edges longer. They require rigid toolholding to prevent breakage and should not be used in hand-held drilling applications.

Carbide-Tipped Drill Bits for Hardened Steel

Carbide-tipped bits maintain their sharp edges when drilling hard material. They are for use in both hand-held drilling and machine-tool applications.

Drill Bits for Plastic

The sharp point allows for gradual penetration to reduce friction and eliminate cracking and chipping when drilling in plastic.

Drill Bits for Carbon Fiber, Fiberglass, and Graphite

These jobbers'-length bits have the rigidity and length required for most applications.

Short-Length Drill Bits for Carbon
Fiber, Fiberglass, and Graphite

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'-length drill bits.

Drill Bits for Stainless Steel and Nickel

Cobalt Steel Drill Bits for Stainless Steel and Nickel

Cobalt steel bits are heat resistant and maintain their sharp edges when drilling hard material. They are for use in both hand-held drilling and machine-tool applications.

Carbide Drill Bits for Stainless Steel and Nickel

Harder, stronger, and more wear resistant than cobalt steel, solid-carbide bits maintain their sharp edges longer. They require rigid toolholding to prevent breakage and should not be used in hand-held drilling applications.

Drill Bits for Glass and Ceramic

The spear-shaped point drills smoothly through glass and ceramic.

Core Drill Bits for Glass and Ceramic

These hollow bits are diamond-tipped for long life and fast cutting speeds. Only for use in drill presses.

Drill Bits for Aluminum, Brass, and Bronze

Because softer metal, like aluminum, brass, and bronze, can clog a bit, the flutes on these bits lift chips out of the hole. Also known as slow-spiral drill bits.

Drill Bits for Sheet Metal

Reversible Drill Bits for Sheet Metal

When one end becomes worn, reverse the bit to use the other end.

Drill Bits for Sheet Metal

These bits have short flutes and a sturdy construction which prevent snagging that deforms sheet metal and thin-wall tubing.

Carbide Drill Bits for Sheet Metal

Harder, stronger, and more wear resistant than high-speed steel, solid-carbide bits maintain their sharp edges longer. They require rigid toolholding to prevent breakage and should not be used in hand-held drilling applications.

Drill Bits for Stone, Granite, and Slate

Multiple cutting edges on the tip allow these bits to drill quickly through natural stone, granite, and other hard, abrasive material.

Drill Bits for Paper and Fabric

These bits have razor-sharp cutting edges for making clean holes in fibrous material.

Left-Hand Drill Bits

High-Speed Steel Left-Hand Drill Bits

Use for drilling in most metal.

Cobalt Steel Left-Hand Drill Bits

With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.

Multidiameter Drill Bits

High-Speed Steel Multidiameter Drill Bits

Use for drilling in most metal.

Cobalt Steel Multidiameter Drill Bits

With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.

Any-Diameter Drill Bits

Place a washer with an ID of the desired hole size over the bit and it acts as a stop to prevent the bit from drilling a larger hole.

Hole-Starting Drill Bits

Carbide Hole-Starting Drill Bits

Cobalt Steel Hole-Starting Drill Bits

Cobalt steel bits are heat resistant and maintain their sharp edges when drilling hard material. They are for use in both hand-held drilling and machine-tool applications.

Drill Bits for Wire Installation

Ball Guides for Flexible-Shaft Drill Bits

Keep flexible-shaft drill bits centered between studs and drywall.

Flexible-Shaft Drill Bits for Wire Installation

The shaft is made of spring steel instead of hardened steel, so it flexes while drilling, allowing you to drill inside walls or between floors.

Hand Guides for Flexible-Shaft Drill Bits

Use these guides to position flexible-shaft drill bits.

Drill Bits for Wire Installation

Unlike traditional wire-installing drill bits, you do not need to strip the end of the wire when using one of these bits. After drilling, insert the wire into the bit's hollow shaft and pull through the hole.

Replaceable Carbide-Insert Drill Bits

Use these bits to drill a large number of holes with high precision. When the cutting edges dull, replace the carbide inserts (sold separately) instead of the entire bit.

Carbide Inserts for Replaceable Carbide-Insert Drill Bits

Pair these caribide inserts with a compatible drill bit body.

Drill Bits for Spot Welds

Three drill points allow these bits to separate spot-welded panels without damaging the bottom panel.

Drill Bits for Countersunk Holes

Hex-Shank Drill Bits with Guide for Countersunk Holes

Insert directly into power screwdrivers, impact drivers, and other tools that accept a 1/4" hex shank.

Round-Shank Drill Bits with
Guide for Countersunk Holes

The built-in guide has a beveled tip that fits into countersunk holes in hardware, such as hinges and latches, to center the bit.

General Purpose Drill Bit Sets

Drill Bit Sets

These jobbers'-length bits have the rigidity and length required for most applications.

Maintenance-Length Drill Bit Sets

Also known as mechanics' bits, these are shorter and more rigid than jobbers’ bits but longer than short-length bits.

Short-Length Drill Bit Sets

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'- and maintenance-length drill bits.

Chip-Clearing Drill Bit Sets

Designed to lift chips out of the hole, these bits reduce clogging and improve coolant flow.

Cobalt Steel Drill Bit Sets

Short-Flute Cobalt Steel Drill Bit Sets

The short flutes on these jobbers'-length bits provide increased rigidity for drilling straighter holes.

Short-Length Cobalt Steel Drill Bit Sets

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'-length drill bits.

Carbide Drill Bit Sets

For the highest accuracy and longest tool life, these solid-carbide bits are harder, stronger, and more wear resistant than high-speed steel, cobalt steel, and carbide-tipped bits.

Quick-Change Carbide Drill Bit Sets

Make fast bit changes—each bit has the same shank diameter, eliminating the need for different collets to hold each size.

Carbide-Tipped Drill Bit Sets

Cobalt Steel 1/2" Diameter Reduced-Shank Drill Bit Sets

With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.

High-Speed Steel 1/2" Diameter
Reduced-Shank Drill Bit Sets

Use these bits for general purpose drilling in most material.

1/4" Diameter Reduced-Shank Drill Bit Sets

3/8" Diameter Reduced-Shank Drill Bit Sets

Hex-Shank Drill Bit Sets

Insert these bits directly into power screwdrivers, impact drivers, and other tools that accept 1/4" hex shanks.

Drill Bit Sets for Masonry

Round- and Hex-Shank Masonry
Drill Bit Sets for Hammer Drills

These bits have a round or hex shank that fits into the three-jaw chuck on a hammer drill.

SDS-Plus-Shank Masonry Drill
Bit Sets for Rotary Hammers

The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers.

Round-Shank Masonry Drill
Bit Sets for Rotary Hammers

Chip-Clearing Round-Shank Masonry
Drill Bit Sets for Rotary Hammers

A more controlled chip removal reduces heat buildup. Use these bits on brittle materials such as block and brick.

Hex-Shank Masonry Drill Bit Sets for Impact Drivers

Drill holes using simultaneous rotary and hammering action to break masonry material into tiny granules.

Drill Bit Sets for Wood

Drill Bit Sets for Precise Holes in Wood

Three sharp points allow these bits to drill accurate straight and overlapping holes, even across the grain. Also known as brad-point bits.

Smooth-Finish Drill Bit Sets for Wood

Bore smooth-finish, flat bottom holes in soft wood, veneer, and laminates. Also known as Forstner bits.

Fast-Cutting Drill Bit Sets for Wood

The screw point draws the bit in, quickly boring holes without applying pressure.

Flat-Blade Drill Bit Sets for Wood

Also known as spade bits, these have a centering point and two cutting edges for boring holes in hard and soft wood.

Drill Bit Sets for Plastic

The sharp point allows for gradual penetration to reduce friction and eliminate cracking and chipping when drilling in plastic.

Left-Hand Drill Bit Sets

Also known as reverse-flute bits, the flutes spiral in the opposite direction of other bits. Use in counterclockwise drilling applications such as removing broken screws.

Multidiameter Drill Bit Sets

Steps with progressively larger diameters let you drill a range of sizes with one bit. Also known as step drills.

Finger Drill Bit Sets

Drill small holes by hand.

Drill Bit Organizers

Compartmented Under-Mount Drill Bit Drawer Cabinets

The drawer is divided into labeled compartments.

Under-Mount Drill Bit Drawer Cabinets

These cabinets have one undivided drawer.

Drill Bit Drawer Cabinets

Store multiple bits of each size. These cabinets have drawers marked with the sizes and decimal equivalents.

Reduced-Shank Drill Bit Drawer Cabinets

The compartments are sized to hold two reduced-shank drill bits and are marked with the bit size.

Magnetic Pouches for Drills

These pouches fit onto most hand-held power drills and impact drivers. They have a magnetic panel on the front that can hold bits and fasteners.

Drill Bit Pouches

Attach these pouches to your belt to easily access drill bits while working.

Drill Bit Cases

Store and organize drill bits so they stay in good working condition and don't go missing.

Reduced-Shank Drill Bit Stands

Each hole is sized to hold the 1/2" shank of a reduced-shank drill bit and marked with a bit size.

Drill Bit Stands

These stands hold round-shank drill bits of different sizes. The holes are marked with the bit size and decimal equivalent.

Drill Bit Extensions

Extensions for Hex-Shank Drill Bits

Tighten the set screws to secure the drill bit in the extension.

Adjustable-Length Quick-Change
Extensions for Hex-Shank Drill Bits

Adjust these extensions to the desired length. They have a quick-change mechanism for fast bit changes.

Quick-Change Extensions for Hex-Shank Drill Bits

A quick-change mechanism allows fast bit changes.

Extensions for Round-Shank Drill Bits

Attach to the shank of a drill bit to extend its reach.

Extensions for SDS-Plus-Shank Drill Bits

SDS-Plus shanks have two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers. These extensions have a quick-change mechanism for fast bit changes.

Hollow-Core Cutters for Magnetic-Base Drills

Inch Size Hollow-Core Cutters for Magnetic-Base Drills

Use these inch size cutters with magnetic-base drills.Also known as annular cutters.

High-Speed Steel Drill Bits

Drill Bits

Short-Length Drill Bits

Extended-Length Drill Bits

Short-Flute Extended-Length Drill Bits

Maintenance-Length Drill Bits

Chip-Clearing Drill Bits

Extended-Length Chip-Clearing Drill Bits

Drill Bits for Precise Holes

Cobalt Steel Drill Bits

Cobalt Steel Drill Bits

Short-Flute Cobalt Steel Drill Bits

Short-Length Cobalt Steel Drill Bits

Extended-Length Cobalt Steel Drill Bits

Short-Flute Extended-Length Cobalt Steel Drill Bits

Chip-Clearing Cobalt Steel Drill Bits

Carbide Drill Bits

Carbide Drill Bits

Short-Length Carbide Drill Bits

Quick-Change Carbide Drill Bits

Smooth-Finish Carbide Drill Bits

Carbide Drill Bits with Coolant Holes

Carbide Drill Bits for Precise Holes

Chip-Clearing Carbide Drill Bits

Carbide-Tipped Drill Bits

Extended-Length Carbide-Tipped Drill Bits

Extended-Length Carbide-TippedDrill Bits with Coolant Holes

Short-Flute Extended-Length Carbide-Tipped Drill Bits

Carbide-Tipped Drill Bits

Short-Length Carbide-Tipped Drill Bits

Nonsparking Drill Bits

Nonsparking Drill Bits

Reduced Round-Shank Drill Bits

1/2" Diameter Reduced-Shank Drill Bits

Extended-Length 1/2" DiameterReduced-Shank Drill Bits

Cobalt Steel 1/2" Diameter Reduced-Shank Drill Bits

Carbide-Tipped 1/2" Diameter Reduced-Shank Drill Bits

High-Speed Steel 3/4" DiameterReduced-Shank Drill Bits

Cobalt Steel 3/4" Diameter Reduced-Shank Drill Bits

1/4" Diameter Reduced-Shank Drill Bits

3/8" Diameter Reduced-Shank Drill Bits

Morse Taper-Shank Drill Bits

High-Speed Steel Morse Taper-Shank Drill Bits

Cobalt Steel Morse Taper-Shank Drill Bits

Hex-Shank Drill Bits

Hex-Shank Drill Bits

Threaded-Shank Drill Bits

Threaded-Shank Drill Bits

Cobalt Steel Hex-Shank Drill Bits

Cobalt Steel Hex-Shank Drill Bits

Drill Bits for Masonry

SDS-Plus-Shank Masonry Drill Bits for Rotary Hammers

Round- and Hex-Shank MasonryDrill Bits for Hammer Drills

SDS-Max-Shank Masonry Drill Bits for Rotary Hammers

Changeable-Size SDS-Max-Shank MasonryCore Drill Bits for Rotary Hammers

SDS-Max-Shank Masonry CoreDrill Bits for Rotary Hammers

Spline-Shank Masonry Drill Bits for Rotary Hammers

Changeable-Size Spline-Shank MasonryCore Drill Bits for Rotary Hammers

Tapered-Round-Shank MasonryDrill Bits for Rotary Hammers

Round- and Hex-Shank MasonryDrill Bits for Rotary-Only Drilling

Chip-Clearing Round-Shank MasonryDrill Bits for Rotary-Only Drilling

Hex-Shank Masonry Drill Bits for Impact Drivers

Hex-Shank Masonry Core DrillBits for Rotary-Only Drilling

Masonry Drill Bits for Drilling Rigs

Thread Adapters for Masonry Drill Bits for Drilling Rigs

SDS-Plus-Shank Masonry DrillBits for Tapping Screw Installation

Round-Shank Masonry Drill Bitsfor Tapping Screw Installation

Hex-Shank Masonry Drill Bitsfor Tapping Screw Installation

Drive Sleeves for Hex-Shank MasonryDrill Bits for Tapping Screw Installation

SDS-Plus-Shank Masonry Drill Bits for Rebar-Cutting

Round-Shank Masonry Drill Bits for Rebar-Cutting

SDS-Max-Shank Hollow MasonryDrill Bits for Dust Containment

SDS-Plus-Shank Hollow MasonryDrill Bits for Dust Containment

Masonry Drill Bits for Anchor Installation

Drill Bits for Wood

Smooth-Finish Drill Bits for Wood

Fast-Cutting Smooth-Finish Drill Bits for Wood

Drill Bits for Precise Holes in Wood

Flat-Blade Drill Bits for Wood

Adjustable-Size Flat-Blade Drill Bits for Wood

Extended-Length Carbide-Tipped
Drill Bits with Coolant Holes

Extended-Length 1/2" Diameter
Reduced-Shank Drill Bits

High-Speed Steel 3/4" Diameter
Reduced-Shank Drill Bits

Round- and Hex-Shank Masonry
Drill Bits for Hammer Drills

Changeable-Size SDS-Max-Shank Masonry
Core Drill Bits for Rotary Hammers

SDS-Max-Shank Masonry Core
Drill Bits for Rotary Hammers

Changeable-Size Spline-Shank Masonry
Core Drill Bits for Rotary Hammers

Tapered-Round-Shank Masonry
Drill Bits for Rotary Hammers

Round- and Hex-Shank Masonry
Drill Bits for Rotary-Only Drilling

Chip-Clearing Round-Shank Masonry
Drill Bits for Rotary-Only Drilling

Hex-Shank Masonry Core Drill
Bits for Rotary-Only Drilling

SDS-Plus-Shank Masonry Drill
Bits for Tapping Screw Installation

Round-Shank Masonry Drill Bits
for Tapping Screw Installation

Hex-Shank Masonry Drill Bits
for Tapping Screw Installation

Drive Sleeves for Hex-Shank Masonry
Drill Bits for Tapping Screw Installation

SDS-Max-Shank Hollow Masonry
Drill Bits for Dust Containment

SDS-Plus-Shank Hollow Masonry
Drill Bits for Dust Containment

Short-Length Drill Bits for Carbon
Fiber, Fiberglass, and Graphite

Round-Shank Drill Bits with
Guide for Countersunk Holes

High-Speed Steel 1/2" Diameter
Reduced-Shank Drill Bit Sets

Round- and Hex-Shank Masonry
Drill Bit Sets for Hammer Drills

SDS-Plus-Shank Masonry Drill
Bit Sets for Rotary Hammers