Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'- and maintenance-length drill bits.

These jobbers'-length bits have the rigidity and length required for most applications.

The short flutes on these jobbers'-length bits provide increased rigidity for drilling straighter holes.

The parabolic spiral flutes lift chips out of the hole, reducing clogging and improving coolant flow.

These jobbers'-length bits have the rigidity and length required for most applications.

Insert these bits directly into power screwdrivers, impact drivers, and other tools that accept 1/4" hex shanks.

These bits are cut to match a wood screw’s thread and diameter, resulting in a perfect fit for a screw. They produce clean edges when cutting soft and hard wood.

Cobalt steel bits are heat resistant and maintain their sharp edges when drilling hard material. They are for use in both hand-held drilling and machine-tool applications.

These bits have razor-sharp cutting edges for making clean holes in fibrous material.

With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.

Use hex-shank bits (also known as insert bits) in powered tools.

Drill and tap holes in a range of diameters. With a drill bit point to drive into the workpiece, these tools can drill and tap holes in a single step. Connect them directly to drills, power screwdrivers, and other tools that accept a 1/4" hex shank.