42 Products

Titanium-nitride (TiN) coated drill bits last longer and can drill at higher speeds than uncoated drill bits.

Titanium-aluminum-nitride (TiAlN) coated drill bits are the most wear and temperature resistant for the longest life and highest drilling speeds.

Drill bits with a split point keep centered without a pilot hole.

For technical drawings and 3-D models, click on a part number.

The short flutes on these jobbers'-length bits provide increased rigidity for drilling straighter holes. Made of cobalt steel, which has better heat and wear resistance than high-speed steel, they can run up to 25% faster and have a longer tool life. A split point keeps the bit centered without a pilot hole.

For technical drawings and 3-D models, click on a part number.

The shank has a smaller diameter than the tip, allowing you to drill large holes with machines that have small-capacity chucks. A split point keeps the bit centered without a pilot hole.

For technical drawings and 3-D models, click on a part number.

In addition to resisting heat and wear better than high-speed steel drill bits, these can also run up to 25% faster and have a longer tool life. Insert them into power screwdrivers, impact drivers, and other tools that accept hex shanks. The flat surfaces on the hex shank allow tool chucks to grip these bits more securely than those with a round shank. A split point keeps the bits centered without a pilot hole.

Three sharp points allow these bits to drill accurate straight and overlapping holes, even across the grain. The center guide point prevents the bit from wandering. Also known as brad-point bits.

High-speed steel drill bits are stronger and more wear resistant than steel drill bits.

Because softer metal, like aluminum, brass, and bronze, can clog a bit, the flutes on these bits lift chips out of the hole. Also known as slow-spiral drill bits. They are jobbers' length and have the rigidity and length required for most applications.

For technical drawings and 3-D models, click on a part number.

Cobalt steel and a titanium aluminum nitride (TiAlN) coating provide the heat and wear resistance necessary for drilling in stainless steel and nickel alloys. These bits have parabolic spiral flutes, which lift chips out of the hole to reduce clogging and improve coolant flow. They are jobbers' length and have the rigidity and length required for most hand-held drilling and machine tool applications.

For technical drawings and 3-D models, click on a part number.

Also known as reverse-flute bits, the flutes spiral in the opposite direction of other bits. Use in counterclockwise drilling applications such as removing broken screws. These bits are jobbers' length and have the rigidity and length required for most applications.

For technical drawings and 3-D models, click on a part number.

Use these bits to drill a large number of holes with high precision. When the cutting edges dull, replace the carbide inserts (sold separately) instead of the entire bit. Each drill bit requires two inserts—one on the inner cutting edge and one on the outer cutting edge. Bits can be used in CNC machines with coolant-through technology; holes in the bit allow coolant to be channeled through the tool for more efficient chip evacuation.

For technical drawings and 3-D models, click on a part number.

These stands hold one of each bit size. Each hole is marked with the size.

These rods, also known as drill blanks, have an undersized diameter for machining your own jobbers'-length drill bits. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.

Also known as reamer blanks, these rods have an oversized diameter that allows for finishing to your exact requirements. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.