Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'- and maintenance-length drill bits.

Black-oxide drill bits produce less friction than uncoated drill bits.

Titanium-nitride (TiN) coated drill bits last longer and can drill at higher speeds than uncoated and black-oxide drill bits.

Drill bits with a split point keep centered without a pilot hole.

For technical drawings and 3-D models, click on a part number.

These jobbers'-length bits have the rigidity and length required for most applications. The flutes are designed to lift chips out of the hole, reducing clogging and improving coolant flow.

Parabolic spiral flute drill bits have wider flutes for more efficient chip evacuation than spiral-flute bits.

Titanium-nitride (TiN) coated drill bits last longer and can drill at higher speeds than uncoated and black-oxide drill bits.

Drill bits with a split point keep centered without a pilot hole.

For technical drawings and 3-D models, click on a part number.

These jobbers'-length bits have the rigidity and length required for most applications. Made of cobalt steel, which has better heat and wear resistance than high-speed steel, they can run up to 25% faster and have a longer tool life.

Titanium-nitride (TiN) coated drill bits last longer and can drill at higher speeds than uncoated drill bits.

Titanium-aluminum-nitride (TiAlN) coated drill bits are the most wear and temperature resistant for the longest life and highest drilling speeds.

Drill bits with a split point keep centered without a pilot hole.

Three cutting edges instead of the typical two enable these bits to drill holes with a smoother finish than other bits. Made of solid carbide for the highest accuracy and longest tool life, they are harder, stronger, and more wear resistant than high-speed steel, cobalt steel, and carbide-tipped bits. They retain a sharp, hard edge at high temperatures for the best performance on hard and abrasive material. These bits require rigid toolholding to prevent breakage and should not be used in hand-held drilling. All are jobbers’ length so they have the rigidity and length required for most applications. A split point keeps the bit centered without a pilot hole.

For technical drawings and 3-D models, click on a part number.