These jobbers'-length bits have the rigidity and length required for most applications. Made of solid carbide for the highest accuracy and longest tool life, they are harder, stronger, and more wear resistant than high-speed steel, cobalt steel, and carbide-tipped bits. They retain a sharp, hard edge at high temperatures for the best performance on hard and abrasive material. The four-facet point keeps the bit centered without a pilot hole. These bits require rigid toolholding to prevent breakage and should not be used in hand-held drilling applications.

Titanium-nitride (TiN) coated drill bits last longer and can drill at higher speeds than uncoated drill bits.

Titanium-aluminum-nitride (TiAlN) coated drill bits are the most wear and temperature resistant for the longest life and highest drilling speeds.

For technical drawings and 3-D models, click on a part number.

Three cutting edges instead of the typical two enable these bits to drill holes with a smoother finish than other bits. Made of solid carbide for the highest accuracy and longest tool life, they are harder, stronger, and more wear resistant than high-speed steel, cobalt steel, and carbide-tipped bits. They retain a sharp, hard edge at high temperatures for the best performance on hard and abrasive material. These bits require rigid toolholding to prevent breakage and should not be used in hand-held drilling. All are jobbers’ length so they have the rigidity and length required for most applications. A split point keeps the bit centered without a pilot hole.

For technical drawings and 3-D models, click on a part number.

The parabolic spiral flutes lift chips out of the hole, reducing clogging and improving coolant flow. For the highest accuracy and longest tool life, these solid-carbide bits are harder, stronger, and more wear resistant than high-speed steel, cobalt steel, and carbide-tipped bits. They retain a sharp, hard edge at high temperatures for the best performance on hard and abrasive material. These bits require rigid toolholding to prevent breakage and should not be used in hand-held drilling. All are jobbers’ length so they have the rigidity and length required for most applications.

Titanium-nitride (TiN) coated drill bits last longer and can drill at higher speeds than uncoated drill bits.

For technical drawings and 3-D models, click on a part number.

These jobbers'-length bits have the rigidity and length required for most applications. Made of carbide-tipped steel, which has better wear resistance than high-speed steel and cobalt steel, they maintain a sharper, harder edge at high temperatures for excellent performance on abrasive material, such as plastic. Because they aren’t as brittle as solid carbide bits, they can be used in less rigid setups, such as a hand-held drill.

Drill bits with a split point keep centered without a pilot hole.

Drill bits with 135° point angle produce smaller chips than 118° point to prevent clogging.

For technical drawings and 3-D models, click on a part number.