These jobbers'-length bits have the rigidity and length required for most applications. Made of cobalt steel, which has better heat and wear resistance than high-speed steel, they can run up to 25% faster and have a longer tool life.

Titanium-nitride (TiN) coated drill bits last longer and can drill at higher speeds than uncoated drill bits.

Drill bits with a split point keep centered without a pilot hole.

For technical drawings and 3-D models, click on a part number.

The shank has a smaller diameter than the tip, allowing you to drill large holes with machines that have small-capacity chucks. A split point keeps the bit centered without a pilot hole.

For technical drawings and 3-D models, click on a part number.

Drill holes using simultaneous rotary and hammering action to break masonry material into tiny granules. These bits drill faster and penetrate materials with less pressure than rotary-only bits. Also known as percussion or impact bits.

For technical drawings and 3-D models, click on a part number.

Three sharp points allow these bits to drill accurate straight and overlapping holes, even across the grain. The center guide point prevents the bit from wandering. Also known as brad-point bits.

High-speed steel drill bits are stronger and more wear resistant than steel drill bits.

For technical drawings and 3-D models, click on a part number.

These bits are cut to match a wood screw’s thread and diameter, resulting in a perfect fit for a screw. They produce clean edges when cutting soft and hard wood.

For technical drawings and 3-D models, click on a part number.