Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'- and maintenance-length drill bits.

Black-oxide drill bits produce less friction than uncoated drill bits.

Drill bits with a split point keep centered without a pilot hole.

For technical drawings and 3-D models, click on a part number.

These jobbers'-length bits have the rigidity and length required for most applications. Made of solid carbide for the highest accuracy and longest tool life, they are harder, stronger, and more wear resistant than high-speed steel, cobalt steel, and carbide-tipped bits. They retain a sharp, hard edge at high temperatures for the best performance on hard and abrasive material. The four-facet point keeps the bit centered without a pilot hole. These bits require rigid toolholding to prevent breakage and should not be used in hand-held drilling applications.

For technical drawings and 3-D models, click on a part number.

The straight flutes and notched point withstand the heavy pressure necessary to penetrate hard steel. These carbide-tipped bits maintain their sharp edges when drilling abrasive material. Because they aren’t as brittle as solid carbide bits, they can be used in less rigid setups, such as a hand-held drill. They are jobbers' length and have the rigidity and length required for most hand-held drilling and machine tool applications.

For technical drawings and 3-D models, click on a part number.