System of Measurement System of Measurement |
---|
|
Size Size | Show |
---|
|
Size Size | Hide |
---|
Decimal Size Equivalent Decimal Size Equivalent |
---|
|
For Use On For Use On |
---|
|
|
Material Material |
---|
|
Finish Finish |
---|
|
Shank Type Shank Type |
---|
![]() | ![]() |
Round | Morse Taper |
Length Class Length Class |
---|
![]() |
Jobbers' Length |
![]() |
Short Length |
![]() |
Extended Length |
![]() |
Maintenance Length |
Bit Style Bit Style |
---|
![]() | Spiral Flute |
![]() | Parabolic Spiral Flute |
![]() | Straight Flute |
Individual/Set Individual/Set |
---|
|
Maximum Drilling Depth Maximum Drilling Depth |
---|
|
|
Point Style Point Style |
---|
![]() |
Split |
![]() |
Standard |
![]() |
Four Facet |
![]() |
Notched |
Flute Direction Flute Direction |
---|
![]() |
Right Hand |
![]() |
Left Hand |
Specifications Met Specifications Met |
---|
|
For Maximum Hardness For Maximum Hardness |
---|
|
Morse Taper Diameter Morse Taper Diameter |
---|
|
Morse Taper Number Morse Taper Number |
---|
|
Number of Coolant Holes Number of Coolant Holes |
---|
|
More
More
These jobbers'-length bits have the rigidity and length required for most applications.
Black-oxide and black-and-gold-oxide drill bits produce less friction than uncoated drill bits.
Titanium-nitride (TiN) coated drill bits last longer and can drill at higher speeds than uncoated and oxide-coated drill bits.
Drill bits with a split point keep centered without a pilot hole.
Shank | Each | Pkg. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Type | Size | Point Style | Specifications Met | For Use On | Each | Pkg. Qty. | Pkg. | ||
Metric | |||||||||||||
Black-Oxide High-Speed Steel | |||||||||||||
8.5 mm | 0.3346" | 117mm | 58mm | Round | 8.5mm | Standard | DIN 338 | Steel, Iron, Stainless Steel | 00000000 | 00000 | 6 | 00000000 | 000000 |
Black-and-Gold Oxide High-Speed Steel | |||||||||||||
8.5 mm | 0.3346" | 121mm | 86.1mm | Round | 8.5mm | Split | NAS907 Type B | Steel, Iron, Stainless Steel | 000000000 | 0000 | 5 | 000000000 | 00000 |
Titanium-Nitride (TiN) Coated High-Speed Steel | |||||||||||||
8.5 mm | 0.3346" | 117mm | 58mm | Round | 8.5mm | Standard | DIN 338 | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 0000000 | 00000 | __ | 000000 | 00 |
Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'- and maintenance-length drill bits.
Black-oxide drill bits produce less friction than uncoated drill bits.
Titanium-nitride (TiN) coated drill bits last longer and can drill at higher speeds than uncoated and black-oxide drill bits.
Drill bits with a split point keep centered without a pilot hole.
Shank | Each | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Type | Size | Point Style | Specifications Met | For Use On | Each | |
Metric | ||||||||||
Black-Oxide High-Speed Steel | ||||||||||
8.5 mm | 0.3346" | 79mm | 20mm | Round | 8.5mm | Split | DIN 1897 | Steel, Iron, Stainless Steel | 00000000 | 00000 |
Titanium-Nitride (TiN) Coated High-Speed Steel | ||||||||||
8.5 mm | 0.3346" | 79mm | 38.1mm | Round | 8.5mm | Split | ANSI Standards, DIN 338 | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 0000000 | 0000 |
Access hard-to-reach spots and drill deep holes.
Shank | |||||||||
---|---|---|---|---|---|---|---|---|---|
Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Type | Size | Point Style | For Use On | Each | |
Metric | |||||||||
Uncoated High-Speed Steel | |||||||||
8.5 mm | 0.3346" | 165mm | 91.7mm | Round | 8.5mm | Standard | Steel, Iron, Aluminum, Brass, Bronze, Plastic | 00000000 | 000000 |
These jobbers'-length bits have the rigidity and length required for most applications. The flutes are designed to lift chips out of the hole, reducing clogging and improving coolant flow.
Parabolic spiral flute drill bits have wider flutes for more efficient chip evacuation than spiral-flute bits.
Black-oxide drill bits produce less friction than uncoated drill bits.
Drill bits with a split point keep centered without a pilot hole.
Shank | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Type | Size | Point Style | For Use On | Specifications Met | Each | |
Metric—Parabolic Spiral Flute | ||||||||||
Uncoated High-Speed Steel | ||||||||||
8.5 mm | 0.3346" | 117mm | 58mm | Round | 8.5mm | Split | Steel, Iron, Aluminum, Brass, Bronze, Plastic | DIN 338 | 0000000 | 00000 |
Metric—Spiral Flute | ||||||||||
Black-Oxide High-Speed Steel | ||||||||||
8.5 mm | 0.3346" | 117mm | 58mm | Round | 8.5mm | Split | Steel, Iron, Stainless Steel | DIN 338 | 00000000 | 00000 |
These jobbers'-length bits have the rigidity and length required for most applications. Made of cobalt steel, which has better heat and wear resistance than high-speed steel, they can run up to 25% faster and have a longer tool life.
Titanium-nitride (TiN) coated drill bits last longer and can drill at higher speeds than uncoated drill bits.
Titanium-aluminum-nitride (TiAlN) coated drill bits are the most wear and temperature resistant for the longest life and highest drilling speeds.
Drill bits with a split point keep centered without a pilot hole.
Shank | Each | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Type | Size | Point Style | Specifications Met | For Use On | Each | |
Metric | ||||||||||
Uncoated Cobalt Steel | ||||||||||
8.5 mm | 0.3346" | 117mm | 58mm | Round | 8.5mm | Split | NAS907 Type J | Steel, Hardened Steel, Iron, Stainless Steel, Nickel | 000000000 | 000000 |
Titanium-Nitride (TiN) Coated Cobalt Steel | ||||||||||
8.5 mm | 0.3346" | 117mm | 74.9mm | Round | 8.5mm | Split | DIN 338 | Steel, Hardened Steel, Iron, Stainless Steel, Nickel, Titanium, Fiberglass | 0000000 | 00000 |
Titanium-Aluminum-Nitride (TiAlN) Coated Cobalt Steel | ||||||||||
8.5 mm | 0.3346" | 117mm | 42.5mm | Round | 8.5mm | Split | DIN 338 | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Titanium, Fiberglass | 00000000 | 00000 |
The parabolic spiral flutes lift chips out of the hole, reducing clogging and improving coolant flow. With better heat and wear resistance than high-speed steel, these cobalt steel bits can run up to 25% faster and have a longer tool life. All are jobbers’ length so they have the rigidity and length required for most applications. A split point keeps the bit centered without a pilot hole.
Shank | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Type | Size | Point Style | Specifications Met | For Use On | Each | |
Metric—Parabolic Spiral Flute | ||||||||||
Uncoated Cobalt Steel | ||||||||||
8.5 mm | 0.3346" | 117mm | 75mm | Round | 8.5mm | Split | DIN 338 | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel | 0000000 | 000000 |
Holes in these bits allow coolant to be run through the tool for more efficient chip evacuation. Use them in CNC machines with coolant-through technology. Made of solid carbide for the highest accuracy and longest tool life, they are harder, stronger, and more wear resistant than high-speed steel, cobalt steel, and carbide-tipped bits. They retain a sharp, hard edge at high temperatures for the best performance on hard and abrasive material. A titanium aluminum nitride (TiAlN) coating gives them additional wear and temperature resistance. The four-facet point keeps the bit centered without a pilot hole. These bits require rigid toolholding to prevent breakage and should not be used in hand-held drilling applications.
Jobbers'-length drill bits have the rigidity and length required for most applications.
Maintenance-length drill bits are shorter and more rigid than jobbers'-length bits but longer than short-length bits. They hold up better than jobbers' bits when drilling in hard metal. Also known as mechanics' bits.
Shank | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Type | Size | Point Style | No. of Coolant Holes | For Use On | Each | |
Metric—Jobbers' Length | ||||||||||
Titanium-Aluminum-Nitride (TiAlN) Coated Carbide | ||||||||||
8.5 mm | 0.3346" | 102mm | 61mm | Round | 10mm | Four Facet | 2 | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Titanium, Fiberglass | 00000000 | 0000000 |
Metric—Maintenance Length | ||||||||||
Titanium-Aluminum-Nitride (TiAlN) Coated Carbide | ||||||||||
8.5 mm | 0.3346" | 89mm | 47mm | Round | 10mm | Four Facet | 2 | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Titanium, Fiberglass | 00000000 | 000000 |
These jobbers'-length bits have the rigidity and length required for most applications. Made of carbide-tipped steel, which has better wear resistance than high-speed steel and cobalt steel, they maintain a sharper, harder edge at high temperatures for excellent performance on abrasive material, such as plastic. Because they aren’t as brittle as solid carbide bits, they can be used in less rigid setups, such as a hand-held drill.
Shank | Standard Point | ||||||||
---|---|---|---|---|---|---|---|---|---|
Size | Decimal Size Equivalent | Overall Lg. | Type | Size | For Use On | Max. Drilling Dp. | Point Angle | Each | |
Metric | |||||||||
Uncoated Carbide-Tipped Steel | |||||||||
8.5 mm | 0.3346" | 121mm | Round | 8.5mm | Steel, Iron, Titanium, Aluminum, Brass, Bronze, Plastic | 71.1mm | 118° | 00000000 | 000000 |
Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than standard-length drill bits. Made of carbide-tipped steel, which has better wear resistance than high-speed steel and cobalt steel, they maintain a sharper, harder edge at high temperatures for excellent performance on abrasive material, such as plastic. Because they aren’t as brittle as solid carbide bits, they can be used in less rigid setups, such as a hand-held drill.
Shank | Standard Point | ||||||||
---|---|---|---|---|---|---|---|---|---|
Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Type | Size | For Use On | Point Angle | Each | |
Metric | |||||||||
Uncoated Carbide-Tipped Steel | |||||||||
8.5 mm | 0.3346" | 76mm | 25.5mm | Round | 8.5mm | Steel, Iron, Titanium, Aluminum, Brass, Bronze, Plastic | 118° | 000000000 | 000000 |
Install the Morse taper shank directly into the tapered spindle on machines such as drill presses and lathes.
Morse Taper | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size | Decimal Size Equivalent | No. | Dia. | Overall Lg. | Max. Drilling Dp. | Shank Type | Point Style | Specifications Met | For Use On | Each | |
Metric | |||||||||||
Black-Oxide High-Speed Steel | |||||||||||
8.5 mm | 0.3346" | 1 | 0.475" | 156mm | 58mm | Morse Taper | Standard | DIN 345 | Steel, Iron, Stainless Steel | 00000000 | 000000 |
The straight flutes and notched point withstand the heavy pressure necessary to penetrate hard steel. These carbide-tipped bits maintain their sharp edges when drilling abrasive material. Because they aren’t as brittle as solid carbide bits, they can be used in less rigid setups, such as a hand-held drill. They are jobbers' length and have the rigidity and length required for most hand-held drilling and machine tool applications.
Shank | |||||||||
---|---|---|---|---|---|---|---|---|---|
Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Type | Size | Point Style | For Max. Hardness | Each | |
Metric | |||||||||
Uncoated Carbide-Tipped Steel | |||||||||
8.5 mm | 0.3346" | 121mm | 34mm | Round | 8.5mm | Notched | Rockwell C60 | 0000000 | 000000 |
The sharp point allows for gradual penetration to reduce friction and eliminate cracking and chipping when drilling in plastic. These bits are jobbers' length and have the rigidity and length required for most applications.
Shank | ||||||||
---|---|---|---|---|---|---|---|---|
Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Type | Size | Point Style | Each | |
Metric | ||||||||
Uncoated High-Speed Steel | ||||||||
8.5 mm | 0.3346" | 117mm | 86mm | Round | 8.5mm | Standard | 000000000 | 000000 |
Also known as reverse-flute bits, the flutes spiral in the opposite direction of other bits. Use in counterclockwise drilling applications such as removing broken screws. These bits are jobbers' length and have the rigidity and length required for most applications.
Black-oxide and black-and-gold-oxide drill bits produce less friction than uncoated drill bits.
Shank | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Type | Size | Point Style | For Use On | Specifications Met | Each | |
Metric | ||||||||||
Black-Oxide High-Speed Steel | ||||||||||
8.5 mm | 0.3346" | 117mm | 63.9mm | Round | 8.5mm | Standard | Steel, Iron, Stainless Steel | DIN 338 | 00000000 | 000000 |