Connection Style Connection Style |
|---|
 |
| Barbed |
 |
| Cam-and-Groove |
Material Material |
|---|
|
For Use With For Use With |
|---|
|
Attachment Type Attachment Type |
|---|
 |  |
| Band-and- Buckle Clamp | Worm-Drive Clamp |
Length Length |
|---|
Maximum Pressure Maximum Pressure |
|---|
|
Specifications Met Specifications Met |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Compatible With Compatible With |
|---|
|
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Metal Cam-and-Groove Hose Couplings for Water
A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug.
Plugs with barbed end are also known as E adapters. Insert the barbed end into plastic or rubber hose and secure with a clamp.
Aluminum plugs and sockets are lighter in weight than brass plugs and sockets. They have good abrasion and corrosion resistance. Brass plugs and sockets are softer than aluminum plugs and sockets, so they’re easier to thread together. They have good corrosion resistance.
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Attachment Type: Use Band-and-Buckle Clamps
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
| Coupling Size | Plug OD | For Hose ID | Max. Pressure | Each | |
Anodized Aluminum | |||||
|---|---|---|---|---|---|
| 1/2 | 15/16" | 1/2" | 250 psi @ 72° F | 00000000 | 000000 |
| 3/4 | 1 1/4" | 1/2" | 250 psi @ 72° F | 00000000 | 0000 |
| 3/4 | 1 1/4" | 3/4" | 250 psi @ 72° F | 0000000 | 00000 |
| 1 | 1 7/16" | 1" | 250 psi @ 72° F | 0000000 | 00000 |
| 1 1/4 | 1 13/16" | 1 1/4" | 250 psi @ 72° F | 0000000 | 00000 |
| 1 1/2 | 2 1/8" | 1 1/2" | 250 psi @ 72° F | 0000000 | 00000 |
| 2 | 2 1/2" | 1 1/2" | 250 psi @ 72° F | 00000000 | 00000 |
| 2 | 2 1/2" | 2" | 250 psi @ 72° F | 0000000 | 00000 |
| 2 1/2 | 3" | 2 1/2" | 200 psi @ 72° F | 0000000 | 00000 |
| 3 | 3 5/8" | 2" | 200 psi @ 72° F | 00000000 | 00000 |
| 3 | 3 5/8" | 3" | 200 psi @ 72° F | 0000000 | 00000 |
| 4 | 4 3/4" | 3" | 150 psi @ 72° F | 00000000 | 00000 |
| 4 | 4 3/4" | 4" | 150 psi @ 72° F | 0000000 | 00000 |
| 5 | 5 3/4" | 5" | 75 psi @ 72° F | 00000000 | 000000 |
| 6 | 6 15/16" | 6" | 75 psi @ 72° F | 0000000 | 000000 |
Brass | |||||
| 1/2 | 15/16" | 1/2" | 250 psi @ 72° F | 000000000 | 00000 |
| 3/4 | 1 1/4" | 3/4" | 250 psi @ 72° F | 00000000 | 00000 |
| 1 | 1 7/16" | 1" | 250 psi @ 72° F | 00000000 | 00000 |
| 1 1/4 | 1 13/16" | 1 1/4" | 250 psi @ 72° F | 00000000 | 00000 |
| 1 1/2 | 2 1/8" | 1 1/2" | 250 psi @ 72° F | 00000000 | 00000 |
| 2 | 2 1/2" | 1 1/2" | 250 psi @ 72° F | 000000000 | 00000 |
| 2 | 2 1/2" | 2" | 250 psi @ 72° F | 00000000 | 00000 |
| 2 1/2 | 3" | 2 1/2" | 200 psi @ 72° F | 00000000 | 00000 |
| 3 | 3 5/8" | 2" | 200 psi @ 72° F | 000000000 | 000000 |
| 3 | 3 5/8" | 3" | 200 psi @ 72° F | 00000000 | 00000 |
| 4 | 4 3/4" | 3" | 150 psi @ 72° F | 000000000 | 000000 |
| 4 | 4 3/4" | 4" | 150 psi @ 72° F | 00000000 | 000000 |
| 5 | 5 3/4" | 5" | 75 psi @ 72° F | 000000000 | 000000 |
| 6 | 6 15/16" | 6" | 75 psi @ 72° F | 00000000 | 000000 |
Plastic Cam-and-Groove Hose Couplings for Water
Made of polypropylene, these couplings are lighter in weight than metal cam-and-groove couplings and have good abrasion and corrosion resistance. A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug.
Plugs with barbed end are also known as E adapters. Insert the barbed end into plastic or rubber hose and secure with a clamp.
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: See table
- Temperature Range: -20° to 150° F
- Attachment Type: Use Worm-Drive Clamps or Band-and-Buckle Clamps
- Specifications Met: Fed. Spec. A-A-59326
| Coupling Size | Plug OD | For Hose ID | Max. Pressure | Each | |
Polypropylene Plastic | |||||
|---|---|---|---|---|---|
| 3/4 | 1 1/4" | 1/2" | 300 psi @ 72° F | 0000000 | 00000 |
| 3/4 | 1 1/4" | 3/4" | 300 psi @ 72° F | 0000000 | 0000 |
| 1 | 1 7/16" | 1" | 300 psi @ 72° F | 0000000 | 0000 |
| 1 | 1 7/16" | 1 1/4" | 300 psi @ 72° F | 0000000 | 0000 |
| 1 1/2 | 2 1/8" | 1 1/4" | 225 psi @ 72° F | 0000000 | 0000 |
| 1 1/2 | 2 1/8" | 1 1/2" | 200 psi @ 72° F | 0000000 | 0000 |
| 2 | 2 1/2" | 2" | 200 psi @ 72° F | 0000000 | 0000 |
| 3 | 3 5/8" | 3" | 150 psi @ 72° F | 0000000 | 00000 |
| 4 | 4 3/4" | 4" | 50 psi @ 72° F | 0000000 | 00000 |
Metal Cam-and-Groove Hose Couplings for Chemicals and Petroleum
Made of metal, these couplings have better durability than plastic cam-and-groove couplings. A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug. Couplings are compatible with Andrews, Dixon, Ever-Tite, and PT cam-and-groove couplings.
Plugs with barbed end are also known as E adapters. Insert the barbed end into plastic or rubber hose and secure with a clamp.
Aluminum plugs and sockets are lighter in weight than 316 stainless steel plugs and sockets. They have good corrosion resistance. 316 stainless steel plugs and sockets have excellent corrosion resistance.
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Attachment Type: Use Band-and-Buckle Clamps
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: 6 Coupling Size and smaller: Fed. Spec. A-A-59326
| Coupling Size | Plug OD | For Hose ID | Dash Size | Max. Pressure | Each | |
Aluminum | ||||||
|---|---|---|---|---|---|---|
| 1/2 | 15/16" | 1/2" | 08 | 250 psi @ 72° F | 000000000 | 00000 |
| 3/4 | 1 1/4" | 1/2" | 08 | 250 psi @ 72° F | 000000000 | 0000 |
| 3/4 | 1 1/4" | 3/4" | 12 | 250 psi @ 72° F | 00000000 | 0000 |
| 1 | 1 7/16" | 3/4" | 12 | 250 psi @ 72° F | 00000000 | 00000 |
| 1 | 1 7/16" | 1" | 16 | 250 psi @ 72° F | 00000000 | 0000 |
| 1 1/4 | 1 13/16" | 1 1/4" | 20 | 250 psi @ 72° F | 00000000 | 00000 |
| 1 1/2 | 2 1/8" | 1" | 16 | 250 psi @ 72° F | 00000000 | 00000 |
| 1 1/2 | 2 1/8" | 1 1/2" | 24 | 250 psi @ 72° F | 00000000 | 00000 |
| 2 | 2 1/2" | 1" | 16 | 250 psi @ 72° F | 000000000 | 00000 |
| 2 | 2 1/2" | 1 1/2" | 24 | 250 psi @ 72° F | 00000000 | 00000 |
| 2 | 2 1/2" | 2" | 32 | 250 psi @ 72° F | 00000000 | 00000 |
| 2 1/2 | 3" | 2 1/2" | 40 | 200 psi @ 72° F | 00000000 | 00000 |
| 3 | 3 5/8" | 2" | 32 | 200 psi @ 72° F | 00000000 | 00000 |
| 3 | 3 5/8" | 3" | 48 | 200 psi @ 72° F | 00000000 | 00000 |
| 4 | 4 3/4" | 3" | 48 | 150 psi @ 72° F | 00000000 | 00000 |
| 4 | 4 3/4" | 4" | 64 | 150 psi @ 72° F | 00000000 | 00000 |
| 5 | 5 3/4" | 5" | __ | 75 psi @ 72° F | 000000000 | 00000 |
| 6 | 6 15/16" | 6" | 96 | 75 psi @ 72° F | 00000000 | 00000 |
316 Stainless Steel | ||||||
| 1/2 | 15/16" | 1/2" | 08 | 250 psi @ 72° F | 000000000 | 00000 |
| 3/4 | 1 1/4" | 1/2" | 08 | 250 psi @ 72° F | 000000000 | 00000 |
| 3/4 | 1 1/4" | 3/4" | 12 | 250 psi @ 72° F | 00000000 | 00000 |
| 1 | 1 7/16" | 1" | 16 | 250 psi @ 72° F | 00000000 | 00000 |
| 1 1/4 | 1 13/16" | 1 1/4" | 20 | 250 psi @ 72° F | 00000000 | 00000 |
| 1 1/2 | 2 1/8" | 1 1/2" | 24 | 250 psi @ 72° F | 00000000 | 00000 |
| 2 | 2 1/2" | 1" | 16 | 250 psi @ 72° F | 000000000 | 000000 |
| 2 | 2 1/2" | 2" | 32 | 250 psi @ 72° F | 00000000 | 00000 |
| 2 1/2 | 3" | 2 1/2" | 40 | 200 psi @ 72° F | 00000000 | 00000 |
| 3 | 3 5/8" | 3" | 48 | 200 psi @ 72° F | 00000000 | 00000 |
| 4 | 4 3/4" | 4" | 64 | 150 psi @ 72° F | 00000000 | 000000 |
| 5 | 5 3/4" | 5" | __ | 75 psi @ 72° F | 000000000 | 000000 |
| 6 | 6 15/16" | 6" | 96 | 75 psi @ 72° F | 00000000 | 000000 |
Plastic Cam-and-Groove Hose Couplings for Chemicals and Petroleum
Made of plastic, these couplings are lighter in weight than metal cam-and-groove hose couplings, yet have the chemical resistance to withstand gasoline and other harsh substances. A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug.
Plugs with barbed end are also known as E adapters. Insert the barbed end into rubber hose and secure with a clamp.
Nylon plugs and sockets have better strength than PVDF plugs and sockets. They have good corrosion and chemical resistance to handle gasoline and fuel applications. PVDF plugs and sockets have better corrosion and chemical resistance than nylon plugs and sockets. Use them when your application involves harsh acids and solvents.
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
- For Use With:
Nylon Plastic: Diesel Fuel, Gasoline, Varnish
PVDF Plastic: Diesel Fuel, Gasoline, Nitric Acid, Phosphoric Acid - Maximum Pressure: See table
- Temperature Range:
Nylon Plastic: -30° to 200° F
PVDF Plastic: -20° to 250° F - Attachment Type: Use Worm-Drive Clamps or Band-and-Buckle Clamps
- Specifications Met: Fed. Spec. A-A-59326
| Coupling Size | Plug OD | For Hose ID | Color | Max. Pressure | Each | |
Nylon Plastic | ||||||
|---|---|---|---|---|---|---|
| 3/4 | 1 1/4" | 1/2" | Yellow | 125 psi @ 72° F | 0000000 | 00000 |
| 3/4 | 1 1/4" | 3/4" | Yellow | 125 psi @ 72° F | 0000000 | 0000 |
| 1 | 1 7/16" | 1" | Yellow | 125 psi @ 72° F | 0000000 | 0000 |
| 1 1/2 | 2 1/8" | 1 1/4" | Yellow | 100 psi @ 72° F | 0000000 | 0000 |
| 1 1/2 | 2 1/8" | 1 1/2" | Yellow | 100 psi @ 72° F | 0000000 | 0000 |
| 2 | 2 1/2" | 2" | Yellow | 100 psi @ 72° F | 0000000 | 0000 |
| 3 | 3 5/8" | 3" | Yellow | 50 psi @ 72° F | 0000000 | 00000 |
| 4 | 4 3/4" | 4" | Yellow | 50 psi @ 72° F | 0000000 | 00000 |
PVDF Plastic | ||||||
| 3/4 | 1 1/4" | 1/2" | White | 125 psi @ 72° F | 00000000 | 00000 |
| 3/4 | 1 1/4" | 3/4" | White | 125 psi @ 72° F | 00000000 | 00000 |
| 1 | 1 7/16" | 1" | White | 125 psi @ 72° F | 00000000 | 00000 |
| 1 1/2 | 2 1/8" | 1 1/4" | White | 100 psi @ 72° F | 0000000 | 00000 |
| 1 1/2 | 2 1/8" | 1 1/2" | White | 100 psi @ 72° F | 0000000 | 00000 |
| 2 | 2 1/2" | 2" | White | 100 psi @ 72° F | 0000000 | 00000 |
| 3 | 3 5/8" | 3" | White | 50 psi @ 72° F | 0000000 | 00000 |
Cam-and-Groove Hose Couplings for Food and Beverage
Made of FDA listed materials, these couplings are suitable for food and beverage applications and won’t impart tastes or odors to the product. They also meet NSF/ANSI 61 safety standards for use with drinking water systems. A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug. Plugs and sockets are polypropylene, which is lightweight with good abrasion and corrosion resistance.
Plugs with barbed end are also known as E adapters. Insert the barbed end into rubber hose and secure with a clamp.
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: See table
- Temperature Range: 10° to 180° F
- Attachment Type: Use Worm-Drive Clamps or Band-and-Buckle Clamps
- Specifications Met: FDA Compliant 21 CFR 176.170
FDA Compliant 21 CFR 178.3297
NSF/ANSI 61
| Coupling Size | Plug OD | For Hose ID | Color | Max. Pressure | Each | |
Polypropylene Plastic | ||||||
|---|---|---|---|---|---|---|
| 1 | 1 7/16" | 1" | White | 125 psi @ 72° F | 000000000 | 00000 |
| 1 1/2 | 2 1/8" | 1 1/4" | White | 100 psi @ 72° F | 000000000 | 0000 |
| 1 1/2 | 2 1/8" | 1 1/2" | White | 100 psi @ 72° F | 00000000 | 0000 |
| 2 | 2 1/2" | 2" | White | 100 psi @ 72° F | 00000000 | 0000 |
| 3 | 3 5/8" | 3" | White | 50 psi @ 72° F | 00000000 | 00000 |
| 3/4 | 1 1/4" | 1/2" | White | 125 psi @ 72° F | 000000000 | 0000 |
| 3/4 | 1 1/4" | 3/4" | White | 125 psi @ 72° F | 000000000 | 0000 |