For Shaft Diameter For Shaft Diameter |
|---|
Mounted Bearing Type Mounted Bearing Type |
|---|
 | Four-Bolt Flange Mount |
 | Base Mount |
 | Two-Bolt Flange Mount |
Shaft Mount Type Shaft Mount Type |
|---|
|
ID ID |
|---|
Overall Length Overall Length |
|---|
Overall Height Overall Height |
|---|
Overall Width Overall Width |
|---|
Mounting Hole Center-to-Center Mounting HoleCenter-to-Center |
|---|
Center Height Center Height |
|---|
|
|
Dynamic Radial Load Capacity Dynamic Radial Load Capacity |
|---|
|
Maximum Speed Maximum Speed |
|---|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
For Mounted Bearing Model Number For Mounted BearingModel Number |
|---|
Static Radial Load Capacity Static Radial Load Capacity |
|---|
|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
About Ball and Roller Bearings
More
Insert Bearings
Swap out worn inserts instead of replacing the entire mounted unit. Use the manufacturer model number on your existing mounted bearing to choose a compatible insert. Inserts must be used with the manufacturer model number specified.
Bearings with eccentric lock have a collar that grips in one direction and releases in the other. They are easier to install onto shafts than bearings with a set screw grip and require less adjustment over time. Use with shafts that spin in one direction only.
For technical drawings and 3-D models, click on a part number.
| For Shaft Dia. | For Mounted Bearing Model No. | Each | |
SKF Steel Insert Bearings | |||
|---|---|---|---|
Shaft Mount Type: Eccentric Lock | |||
| 5/8" | P2BL 010-FM, SYH 5/8 FM | 00000000 | 000000 |
| 3/4" | P2BL 012-FM, SYH 3/4 FM | 00000000 | 00000 |
| 7/8" | P2BL 014-FM, SYH 7/8 FM | 00000000 | 00000 |
| 1" | P2BL 100-FM, SYH 1. FM | 00000000 | 00000 |
| 1 1/4" | P2BL 104-FM, SYH 1.1/4 FM | 00000000 | 00000 |
| 1 1/4" | SYH 1.1/4 AFM | 00000000 | 00000 |
| 1 3/8" | P2BL 106-FM, SYH 1.3/8 FM | 00000000 | 00000 |
| 1 7/16" | P2BL 107-FM, SYH 1.7/16 FM | 00000000 | 00000 |
| 1 1/2" | P2BL 108-WF, SYH 1.1/2 WF | 00000000 | 000000 |
| 1 15/16" | P2BL 115-WF, SYH 1.15/16 WF | 00000000 | 000000 |
| 2" | P2BL 200-FM, SYH 2. FM | 00000000 | 000000 |
| 2 3/16" | SYH 2.3/16 FM | 00000000 | 000000 |
Mounted Ball Bearings
Bearings are self-aligning to compensate for shaft misalignment. Seals block out dust and contaminants.
Bearings with eccentric lock have a collar that you twist in one direction to grip and the other to release. Compared to bearings with a set screw, they’re easier to install, require less adjustment over time, and are better for high-speed applications. But, they only work on shafts that spin in one direction.
For technical drawings and 3-D models, click on a part number.
Bearings
With Eccentric Lock
Overall | Mounting | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Hole Lg. | Hole Wd. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Sealed Steel Bearings with Cast Iron Housing | |||||||||||||||
Shaft Mount Type: Eccentric Lock | |||||||||||||||
| 5/8" | 1 1/16" | 2 3/32" | 5 15/32" | 1 1/2" | 7/8" | 7/16" | 3 5/8" | 2,150 | 1,050 | 9,500 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
| 3/4" | 1 1/4" | 2 15/32" | 5" | 1 19/32" | 3/4" | 1/2" | 3 3/4" | 2,850 | 1,450 | 8,500 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
| 7/8" | 1 5/16" | 2 21/32" | 5 1/2" | 1 43/64" | 3/4" | 1/2" | 4 1/8" | 3,150 | 1,750 | 7,000 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
| 1" | 1 5/16" | 2 21/32" | 5 1/2" | 1 43/64" | 3/4" | 1/2" | 4 1/8" | 3,150 | 1,750 | 7,000 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
| 1 1/8" | 1 9/16" | 3 5/32" | 6 1/2" | 1 59/64" | 13/16" | 21/32" | 4 23/32" | 4,350 | 2,500 | 6,300 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
| 1 3/16" | 1 9/16" | 3 5/32" | 6 1/2" | 2 1/16" | 13/16" | 21/32" | 4 23/32" | 4,350 | 2,500 | 6,300 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
| 1 1/4" | 1 13/16" | 3 5/8" | 6 9/16" | 2 1/16" | 13/16" | 21/32" | 5" | 5,700 | 3,400 | 5,300 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
| 1 3/8" | 1 13/16" | 3 5/8" | 6 9/16" | 2 1/16" | 13/16" | 21/32" | 5" | 5,700 | 3,400 | 5,300 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
| 1 7/16" | 1 13/16" | 3 5/8" | 6 9/16" | 2 1/16" | 13/16" | 21/32" | 5" | 5,700 | 3,400 | 5,300 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
| 1 1/2" | 1 15/16" | 4" | 7 1/4" | 2 1/4" | 13/16" | 21/32" | 5 13/32" | 6,900 | 4,250 | 4,800 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
| 1 3/4" | 2 1/16" | 4 3/16" | 7 15/32" | 2 19/64" | 13/16" | 21/32" | 5 25/32" | 7,450 | 4,850 | 4,300 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
| 1 15/16" | 2 3/16" | 4 1/2" | 8 1/8" | 2 3/8" | 7/8" | 25/32" | 6 1/4" | 7,850 | 5,200 | 4,000 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
| 2" | 2 7/16" | 4 29/32" | 8 5/8" | 2 37/64" | 1 1/16" | 25/32" | 6 3/4" | 9,800 | 6,500 | 3,600 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
| 20mm | 33.3mm | 65mm | 127mm | 39.5mm | 20.5mm | 11.5mm | 97mm | 2,850 | 1,450 | 8,500 | -20° to 210° | Self Aligning | Lubricated | 00000000 | 000000 |
| 20mm | 33.3mm | 65mm | 127mm | 42.6mm | 20.5mm | 11.5mm | 97mm | 2,850 | 1,450 | 8,500 | -20° to 210° | Self Aligning | Lubricated | 00000000 | 000000 |
| 25mm | 36.5mm | 70.5mm | 130mm | 41.5mm | 19.5mm | 11.5mm | 102mm | 3,100 | 1,750 | 7,000 | -20° to 210° | Self Aligning | Lubricated | 00000000 | 000000 |
| 25mm | 36.5mm | 70.5mm | 130mm | 44.9mm | 19.5mm | 11.5mm | 102mm | 3,100 | 1,750 | 7,000 | -20° to 210° | Self Aligning | Lubricated | 00000000 | 000000 |
| 30mm | 42.9mm | 82.5mm | 152mm | 46.7mm | 23.5mm | 14mm | 117.5mm | 4,350 | 2,500 | 6,300 | -20° to 210° | Self Aligning | Lubricated | 00000000 | 000000 |
| 30mm | 42.9mm | 82.5mm | 152mm | 50.1mm | 23.5mm | 14mm | 117.5mm | 4,350 | 2,500 | 6,300 | -20° to 210° | Self Aligning | Lubricated | 00000000 | 000000 |
| 40mm | 49.2mm | 99mm | 175mm | 58.9mm | 24.5mm | 14mm | 135.5mm | 6,900 | 4,250 | 4,800 | -20° to 210° | Self Aligning | Lubricated | 00000000 | 000000 |
| 45mm | 54mm | 107.5mm | 187mm | 56.7mm | 22.5mm | 14mm | 143.5mm | 7,450 | 4,850 | 4,300 | -20° to 210° | Self Aligning | Lubricated | 00000000 | 000000 |
| 50mm | 57.2mm | 114.5mm | 203mm | 65.1mm | 26mm | 18mm | 157mm | 7,850 | 5,200 | 4,000 | -20° to 210° | Self Aligning | Lubricated | 00000000 | 000000 |
Mounted Ball Bearings with Four-Bolt Flange
Bearings are self-aligning to compensate for shaft misalignment. Seals block out dust and contaminants.
Set screw bearings secure to shafts as you tighten their screw. They don’t need a collar, but the screw leaves some marring on shafts. Use them in applications where shafts rotate in both directions.
Eccentric lock bearings are quick to install—twist them in one direction to tighten and the opposite to loosen. They’re better than set screw bearings for high speed applications, but they only work with shafts that rotate in one direction.
For technical drawings and 3-D models, click on a part number.
Bearings
Set Screw Mount
Eccentric Lock Mount
Overall | Mounting | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Ht. | Lg. | Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Sealed Steel Bearings with Cast Iron Housing | ||||||||||||||
Shaft Mount Type: Set Screw | ||||||||||||||
| 15/16" | 3 3/4" | 3 3/4" | 1 5/8" | 7/16" | 7/16" | 2 3/4" | 3,100 | 1,750 | 7,000 | -20° to 210° | Self Aligning | Lubricated | 00000000 | 0000000 |
| 1 11/16" | 5 3/8" | 5 3/8" | 2 7/32" | 3/4" | 1/2" | 4 1/8" | 7,450 | 4,850 | 4,300 | -20° to 210° | Self Aligning | Lubricated | 00000000 | 000000 |
| 2 3/16" | 6 3/8" | 6 3/8" | 2 19/32" | 23/32" | 5/8" | 5 1/8" | 9,800 | 6,500 | 3,600 | -20° to 210° | Self Aligning | Lubricated | 00000000 | 000000 |
| 2 7/16" | 6 7/8" | 6 7/8" | 2 29/32" | 23/32" | 5/8" | 5 5/8" | 11,800 | 8,050 | 3,400 | -20° to 210° | Self Aligning | Lubricated | 00000000 | 000000 |
Shaft Mount Type: Eccentric Lock | ||||||||||||||
| 5/8" | 3" | 3" | 1 17/32" | 7/16" | 3/8" | 2 1/8" | 2,100 | 1,050 | 9,500 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
| 3/4" | 3 3/8" | 3 3/8" | 1 11/16" | 3/8" | 3/8" | 2 1/2" | 2,850 | 1,450 | 8,500 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
| 7/8" | 3 3/4" | 3 3/4" | 1 3/4" | 7/16" | 7/16" | 2 3/4" | 3,100 | 1,750 | 7,000 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
| 1" | 3 3/4" | 3 3/4" | 1 3/4" | 7/16" | 7/16" | 2 3/4" | 3,100 | 1,750 | 7,000 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
| 1 1/8" | 4 1/4" | 4 1/4" | 1 7/8" | 21/32" | 7/16" | 3 1/4" | 4,350 | 2,500 | 6,300 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
| 1 3/16" | 4 1/4" | 4 1/4" | 1 7/8" | 21/32" | 7/16" | 3 1/4" | 4,350 | 2,500 | 6,300 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
| 1 1/4" | 4 5/8" | 4 5/8" | 2 1/16" | 1/2" | 1/2" | 3 5/8" | 5,700 | 3,400 | 5,300 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
| 1 3/8" | 4 5/8" | 4 5/8" | 2 1/16" | 1/2" | 1/2" | 3 5/8" | 5,700 | 3,400 | 5,300 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
| 1 7/16" | 4 5/8" | 4 5/8" | 2 1/16" | 1/2" | 1/2" | 3 5/8" | 5,700 | 3,400 | 5,300 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
| 1 1/2" | 5 1/8" | 5 1/8" | 2 5/16" | 11/16" | 1/2" | 4" | 6,900 | 4,250 | 4,800 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
| 1 3/4" | 5 3/8" | 5 3/8" | 2 5/16" | 3/4" | 1/2" | 4 1/8" | 7,450 | 4,850 | 4,300 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
| 1 15/16" | 5 5/8" | 5 5/8" | 2 7/16" | 21/32" | 1/2" | 4 3/8" | 7,850 | 5,200 | 4,000 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
| 2" | 6 3/8" | 6 3/8" | 2 11/16" | 23/32" | 5/8" | 5 1/8" | 9,800 | 6,500 | 3,600 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
| 20mm | 86mm | 86mm | 43mm | 11mm | 11.5mm | 63.5mm | 2,850 | 1,450 | 8,500 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
| 25mm | 95mm | 95mm | 42.5mm | 12mm | 11.5mm | 70mm | 3,100 | 1,750 | 7,000 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
| 30mm | 108mm | 108mm | 46.7mm | 13mm | 11.5mm | 82.5mm | 4,350 | 2,500 | 6,300 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
| 35mm | 118mm | 118mm | 50.4mm | 13mm | 14mm | 92mm | 5,700 | 3,400 | 5,300 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
| 40mm | 130mm | 130mm | 57.2mm | 14mm | 14mm | 101.5mm | 6,900 | 4,250 | 4,800 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
| 45mm | 137mm | 137mm | 58.9mm | 14mm | 16mm | 105mm | 7,450 | 4,850 | 4,300 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
| 50mm | 143mm | 143mm | 60.7mm | 15mm | 18mm | 111mm | 7,850 | 5,200 | 4,000 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
Mounted Ball Bearings with Two-Bolt Flange
Eccentric Lock Mount
Bearings are self-aligning to compensate for shaft misalignment. Seals block out dust and contaminants.
Bearings with an eccentric-lock shaft mount are better than bearings with a set-screw shaft mount for high-speed applications, but only rotate in a single direction.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Ht. | Lg. | Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Sealed Steel Bearings with Cast Iron Housing | ||||||||||||||
Shaft Mount Type: Eccentric Lock | ||||||||||||||
| 17mm | 57mm | 98.5mm | 39.1mm | 11mm | 11.5mm | 76.5mm | 2,100 | 1,050 | 9,500 | -20° to 210° | Self Aligning | Lubricated | 00000000 | 0000000 |
| 20mm | 60.5mm | 112mm | 42.5mm | 11mm | 11.5mm | 90mm | 2,850 | 1,450 | 8,500 | -20° to 210° | Self Aligning | Lubricated | 00000000 | 000000 |
| 25mm | 70mm | 124mm | 42.5mm | 12mm | 11.5mm | 99mm | 3,100 | 1,750 | 7,000 | -20° to 210° | Self Aligning | Lubricated | 00000000 | 000000 |
| 30mm | 83mm | 141.5mm | 46.7mm | 13mm | 11.5mm | 116.5mm | 4,350 | 2,500 | 6,300 | -20° to 210° | Self Aligning | Lubricated | 00000000 | 000000 |
| 30mm | 83mm | 141.5mm | 50.1mm | 13mm | 11.5mm | 116.5mm | 4,350 | 2,500 | 6,300 | -20° to 210° | Self Aligning | Lubricated | 00000000 | 000000 |