These electrodes come with a 20° angle on both ends.

These electrodes come with a 20° angle on both ends.

These electrodes come with a 20° angle on both ends.

These electrodes come with a 20° angle on both ends.

Make welds quickly with these fast-melting rods.

These rods create stronger welds than standard TIG welding rods for steel.

The gas valve allows you to control the gas flow at your torch instead of at the machine.

These electrodes are designed for optimum performance when used with an AC power source.

These electrodes penetrate deeper into the base material for higher-quality welds than standard fast-deposit stick electrodes for steel.

These E4043 electrodes are for aluminum 3003, 3004, 5052, 6061, and 6063.

Join gray iron, ductile iron, malleable iron, and alloy cast iron to themselves, and to each other.

The flat tip creates a larger weld and can be used when appearance is less important.

The pointed tip is best for tight areas or for a small weld.

Use this wire on steel sheets.

This wire creates stronger welds than standard MIG welding wire for steel.

Make welds quickly with this fast-melting wire.

Pair this wire with an MIG gun to fuse aluminum pieces together.

This wire is an alternative to EniFe-Ci covered electrodes.

Use these cadmium-free alloys with most metals in general purpose applications.

These alloys create stronger bonds than standard brazing alloys.

No need to add flux—these alloys have it built in.

When melted, these alloys form a thin liquid that easily flows into smaller gaps than standard gap-filling brazing alloys.

Also known as trimetal brazing strips, these alloys have silver with nickel alloy sides and a copper core.

Join copper tubing and tube fittings with a stronger bond than standard brazing rings for copper.

These alloys create stronger bonds than standard brazing alloys for copper.

These alloys melt into thicker liquid than standard brazing alloys for copper, which allows them to fill larger gaps.

Using compressed air and electricity, these cutters make accurate cuts in conductive materials such as steel, stainless steel, aluminum, brass, and copper.

Use in wire-cutting EDM machines.