Container Type Container Type | Show |
---|
![]() | Tube |
Container Type Container Type | Hide |
---|
![]() | ![]() |
Cartridge | Syringe |
![]() | ![]() |
Tube | Can |
![]() | ![]() |
Single-Use Packet | Stick |
![]() | ![]() |
Jar | Pail |
![]() | ![]() |
Bottle | Mixer Cup |
![]() | ![]() |
Aerosol Can | Patch |
![]() | ![]() |
Jug | Bag |
![]() | |
Pen |
For Use On For Use On |
---|
For Joining For Joining |
---|
|
Manufacturer Manufacturer |
---|
|
Manufacturer Model Number Manufacturer Model Number |
---|
Maximum Temperature Maximum Temperature |
---|
|
Consistency Consistency |
---|
|
|
Reaches Full Strength Reaches Full Strength |
---|
|
|
|
Begins to Harden Begins to Harden |
---|
|
|
|
Container Size Container Size |
---|
Adhesive Type Adhesive Type |
---|
|
Cure Type Cure Type |
---|
|
Clarity Clarity |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Shear Strength Shear Strength |
---|
|
Viscosity Viscosity |
---|
|
|
Peel Strength Peel Strength |
---|
|
More
More
More
For quick repairs, these epoxies begin to harden in 6 minutes or less. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives.
The size listed is the combined total of the two parts.
DP100NS and 3501 are nonsagging, so they won't drip from vertical or overhead surfaces.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
3501 | 4 | Tube | 6 min. | 24 hrs. | 2,000 | 10 | 1:1 | Thick Liquid (1,000,000 cP) | -65° to 350° | Gray | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 000000 |
Mfr. Model | Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
KwikWeld | 8271 | 10 | Tube | 6 min. | 6 hrs. | 1,000 | Not Rated | 1:1 | Paste (250,000 cP) | Not Rated to 300° | Gray | Metal, Plastic, Rubber, Composites | 0000000 | 000000 |
KwikWeld | 8276 | 2 | Tube | 2 min. | 6 hrs. | 1,000 | Not Rated | 1:1 | Paste (250,000 cP) | Not Rated to 300° | Gray | Metal, Plastic, Rubber, Composites | 0000000 | 0000 |
Container | Strength | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
6.5 | Tube | 4 min. | 24 hrs. | 2,520 | Not Rated | 1:1 | Paste (Not Rated) | -65° to 260° | Amber | Metal, Plastic, Rubber | 0000000 | 000000 |
9 | Tube | 3 min. | 4 hrs. | 2,840 | Not Rated | 1:1 | Paste (250,000 cP) | -40° to 140° | Gray | Metal, Plastic, Rubber, Composites | 00000000 | 00000 |
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals. The size listed is the combined total of the two parts.
Epoxy in 5-oz. tubes is solvent-free. It can be softened in warm water if the contents of the tube have hardened.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
1838 | 3.6 | Tube | 60 min. | 7 days | 2,000 | 4 | 4:5 | Paste (492,500 cP) | -65° to 350° | Green | Metal, Plastic, Rubber, Composites, Glass, Wood | 00000000 | 000000 |
1838L | 4 | Tube | 60 min. | 7 days | 2,000 | 4 | 1:1 | Thick Liquid (11,000 cP) | -65° to 350° | Clear | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 00000 |
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
11C | 4 oz. | Tube | 20 min. | 72 hrs. | 2,270 | Not Rated | 2.5:1 | Paste (367,850 cP) | -65° to 300° | Black | Metal, Plastic, Rubber | 00000000 | 000000 |
1C | 4 oz. | Tube | 20 min. | 72 hrs. | 1,500 | Not Rated | 2.5:1 | Paste (350,000 cP) | -65° to 300° | Off-White | Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
615 | 3.2 oz. | Tube | 10 min. | 24 hrs. | 3,825 | Not Rated | 1:1 | Paste (200,000 cP) | -65° to 180° | Light Blue | Metal, Plastic, Rubber | 00000000 | 00000 |
Container | Strength | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
5 | Tube | 20 min. | 24 hrs. | 2,500 | Not Rated | 2:1 | Paste (Not Rated) | -65° to 260° | Clear | Metal, Plastic, Rubber | 0000000 | 000000 |
For invisible bond lines, these adhesives dry clear. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. Choose an epoxy that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
The size listed is the combined total of the two parts.
DP100 Plus, DP105, and epoxy in 4.5-oz. tubes bond dissimilar materials.
0151 and E-30CL are suitable for fiber-optic applications.
Container | Strength | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | For Joining | Each | |
0151 | 3.3 | Tube | 60 min. | 24 hrs. | 2,675 | Not Rated | 2.7:1 | Thick Liquid (60,000 cP) | -65 to 160° F | Metal, Plastic, Rubber, Glass | 00000000 | 000000 |
608 | 2.8 | Tube | 5 min. | 24 hrs. | 2,980 | Not Rated | 1:1 | Paste (100,000 cP) | -65 to 130° F | Metal, Plastic, Rubber | 00000000 | 00000 |
Container | Strength | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | For Joining | Each | |
4.5 | Tube | 60 min. | 36 hrs. | 2,450 | Not Rated | 2:1 | Paste (Not Rated) | -65 to 260° F | Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Rubber, Rubber to Glass, Glass | 0000000 | 000000 |
To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.
The size listed is the combined total of the two parts.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Specifications Met | For Joining | Each | |
2216 | 3.3 oz. | Tube | 90 min. | 7 days | 1,700 | 25 | 2:3 | Thick Liquid (81,000 cP) | -65° to 350° | DOD-A-82720 | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 000000 |
2216 | 4 oz. | Tube | 2 hrs. | 30 days | 3,000 | 25 | 1:1 | Thick Liquid (10,000 cP) | -65° to 350° | __ | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 00000 |
Container | Strength | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | For Joining | Each | |
9340 | 2.7 | Tube | 90 min. | 24 hrs. | 2,300 | Not Rated | 1:1 | Paste (Not Rated) | -65° to 180° | Metal, Plastic, Rubber | 00000000 | 000000 |
Mfr. Model | Container | Strength | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | For Joining | Each | |
Cold-Weld | 8265-S | 2 | Tube | 4 hrs. | 24 hrs. | 1,800 | Not Rated | 1:1 | Paste (300,000 cP) | Not Rated to 550° | Metal, Plastic, Rubber, Masonry, Wood | 0000000 | 00000 |
Cold-Weld | 8281 | 10 | Tube | 4 hrs. | 24 hrs. | 1,800 | Not Rated | 1:1 | Paste (300,000 cP) | Not Rated to 550° | Metal, Plastic, Rubber, Masonry, Wood | 0000000 | 00000 |
Even when used under water, these adhesives maintain their strength. The most weather- and chemical-resistant structural adhesives, epoxies tend to work especially well on metals.
The size listed is the combined total of the two parts. ClearWeld and Plastic Bonder can be applied to wet surfaces.
Mfr. Model | Container | Strength | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | Environment | For Joining | Each | |
ClearWeld | 8212 | 1 | Tube | 5 min. | 1 hrs. | 1,500 | __ | 1:1 | Paste | Not Rated to 300° | Clear | Submersible | Metal, Plastic, Rubber, Composites | 0000000 | 00000 |
ClearWeld | 50240H | 8 | Tube | 5 min. | 1 hrs. | 1,500 | __ | 1:1 | Paste | Not Rated to 300° | Clear | Submersible | Metal, Plastic, Rubber, Composites | 0000000 | 00000 |
MarineWeld | 8272 | 2 | Tube | 6 hrs. | 24 hrs. | 1,800 | Not Rated | 1:1 | Paste (250,000 cP) | Not Rated to 500° | Gray | Salt Spray, Submersible | Metal, Plastic, Rubber, Composites | 0000000 | 0000 |
These machinable epoxies are mixed with metal so they can be used to repair cracks and threaded holes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.
The size listed is the combined total of the two parts.
1751 and epoxy in 11-oz. tubes are reinforced with aluminum.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
1751 | 3.3 | Tube | 45 min. | 7 days | 2,000 | 4 | 3:2 | Paste (700,000 cP) | -65° to 350° | Gray | Metal, Plastic, Rubber, Composites, Glass, Wood | 00000000 | 000000 |
Container | Strength | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
11 | Tube | 25 min. | 7 days | 2,800 | Not Rated | 1:1 | Paste (1,000,000 cP) | -75° to 170° | Gray | Metal | 00000000 | 000000 |
Assorted adhesives for routine maintenance work or quick repairs.
Mfr. | Includes | Component (Mfr. Model No.) | Reaches Full Strength, hrs. | Mixing Required | Each | |
Loctite® | Case | Pipe Thread Sealant (567)—50 ml Bottle Threadlocker (243)—0.34 oz. Bottle Threadlocker (263)—0.34 oz. Bottle Retaining Compound (609)—0.34 oz. Bottle Retaining Compound (660)—1.69. Tube Gasket Maker Sealant (587)—2.4 oz. Tube Gasket Maker Sealant (518)—1.69 oz. Tube Pipe Thread Sealant (5452)—50 ml Bottle | 24 | No | 0000000 | 0000000 |
Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal. The size listed is the combined total of the two parts.
Devcon Plastic Steel surface fillers can repair areas where brazing and welding is impractical.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Devcon Plastic Steel® Epoxy | |||||||||||||
52345 | 2 oz. | Tube | 60 | 24 | Thick Liquid | 1:1 | 6 sq. in. @ 1/4" | -40° to 200° | Dark Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 00000 |
Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Container | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approximate Coverage @ Thick. | Max. Thick. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Surface Fillers | ||||||||||||||
6.5 oz. | Tube | 3 | 5 hrs. | Paste | 1:1 | 25 sq. in. @ 1/4" | 1/2" | Yes | -40° to 200° | Gray | Machine, Drill, Sand, Tap | Aluminum | 000000 | 000000 |
11 oz. | Tube | 25 | 7 days | Paste | 1:1 | 50 sq. in. @ 1/4" | 1/4" | Yes | -55° to 180° | Silver | Machine, Drill, Sand, Tap | Aluminum, Brass, Bronze, Steel, Cast Iron, Titanium | 0000000 | 00000 |
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Devcon Aluminum Liquid, Devcon Aluminum Putty, and Devcon FasMetal™ 10 HVAC Repair form a nonrusting finish.
Devcon Metal Patch & Fill repairs worn, rusted, and corroded surfaces with less preparation.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Devcon FasMetal™ 10 HVAC Repair | |||||||||||||
19770 | 6.5 oz. | Tube | 60 | 16 hrs. | Paste | 1:1 | 30 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | 00000000 | 000000 |
Devcon Metal Patch & Fill | |||||||||||||
S-50 | 3 oz. | Tube | 20 | 6 hrs. | Paste | __ | 6 sq. in. @ 1/4" | 40° to 400° | Gray | Drill, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Ceramic, Glass | 00000000 | 0000 |
Press these putty surface fillers in place to fill in holes, cracks, and dents. When exposed to sunlight or a UV lamp, they begin to harden immediately.
Epoxy fillers provide better adhesion and more corrosion resistance than polyester fillers.
Container | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Formulation | Size, oz. | Type | Begins to Harden, sec. | Reaches Full Strength, min. | Consistency | For Max. Crack Wd. | Approx. Coverage @ Thick. | Max. Thick. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Polyester | 3.5 | Tube | 1 | 3 | Putty | 1" | 24 sq. in. @ 1/4" | 1/2" | Yes | -40° to 220° | White | Drill, Sand, Tap | Aluminum, Brass, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood | 00000000 | 000000 |
Epoxy | 3.5 | Tube | 1 | 5 | Putty | 1" | 24 sq. in. @ 1/4" | 1/2" | Yes | -40° to 270° | Amber | Drill, Sand, Tap | Aluminum, Brass, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood | 00000000 | 00000 |
Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.
Paste fillers resist alkalies, solvents, gasoline, and oil.
Container | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Max. Thick. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Surface Fillers | ||||||||||||||
2 | Tube | 5 | 24 hrs. | Paste | 1:1 | 12 sq. in. @ 1/4" | 1/2" | Yes | Not Rated to 200° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | 0000000 | 000000 |
No mixing required --these potting compounds come ready to apply. Use them to encase electronic assemblies for protection from dust, moisture, mechanical shock, and vibration. Softer and more flexible than epoxies and urethanes with the widest temperature range, silicone potting compounds are the best choice for high-temperature applications and electronics exposed to thermal cycling. They have good moisture resistance but poor chemical and abrasion resistance. Silicones provide excellent electrical insulation. They're also known as RTV (room-temperature vulcanizing).
Container | Dry Time | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Consistency | Touch | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | Specifications Met | For Use On | Color | Each | |
Dow Corning Compounds—Soft | |||||||||||||
748 | 3 | Tube | Paste | 30 min. | 24 | 475 | Not Rated | -65° to 350° | UL 94HB | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Plastic, Rubber, Composites, Fiberglass, Glass | Off-White | 000000000 | 000000 |
Loctite® Compounds—Soft | |||||||||||||
5145 | 3 | Tube | Thick Liquid | 2 min. | 72 | 450 | 0.2 | -45° to 390° | MIL-A-46146B | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Ceramic, Glass | White | 0000000 | 00000 |
Momentive/GE Compounds—Soft | |||||||||||||
RTV162 | 2.8 | Tube | Paste | 4 hrs. | 48 | 450 | 0.2 | -75° to 400° | MIL-A-46146B, UL Recognized | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, Ceramic, Glass | White | 00000000 | 00000 |
Encase electronic assemblies in a layer of silicone for protection from dust, moisture, mechanical shock, and vibration. Softer and more flexible than epoxies and urethanes with the widest temperature range, silicone potting compounds are the best choice for high-temperature applications and electronics exposed to thermal cycling. They have good moisture resistance but poor chemical and abrasion resistance. Silicones provide excellent electrical insulation. They’re also known as RTV (room-temperature vulcanizing).
Dry Time | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size, oz. | Consistency | Touch | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | Specifications Met | For Use On | Color | Each | |
Momentive/GE Compounds—Medium Soft | ||||||||||||
RTV11 | 16 | Thick Liquid | 90 min. | 24 | 515 | 0.29 | -65° to 400° | GSA A-A-56023A | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel | White | 00000000 | 000000 |
Momentive/GE Compounds—Medium Hard | ||||||||||||
RTV60 | 16 | Thick Liquid | 2 hrs. | 24 | 450 | 0.31 | -65° to 500° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel | Red | 00000000 | 000000 |
Also known as Torr Seal, this sealant forms a rigid bond to seal leaks on vacuum systems and components.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Vacuum Rating, torr | Maximum Vacuum @ Temperature | Tensile Strength, psi | Hardness | Mix Ratio | Temp. Range, °F | For Joining | Color | Each | |
Epoxy | |||||||||||||
4.2 | Tube | 60 min. | 3 days | High | 10⁻⁹ torr @ 72° F | 5,000 | Extra Hard (Durometer 75D) | 2:1 | -45° to 245° | Metal, Glass, Masonry | Off-White | 0000000 | 000000 |
Repair rips, split seams, and detached soles to stop leaks in shoes, boots, and waders. These polyurethane adhesives create a strong, flexible seal that keeps water out, so they’re also used to coat seams. Use on leather, plastic, and rubber. They fully harden in 10 hours and dry clear.
Material | Color | Clarity | Consistency | Container Size, oz. | Begins to Harden | Reaches Full Strength | Mixing Required | For Use On | Each | |
Polyurethane Epoxy | Clear | Clear | Thick Liquid | 0.75 | 60 min. | 10 hrs. | No | Leather, Plastic, Rubber | 0000000 | 00000 |