Container Type Container Type |
---|
![]() | Cartridge |
For Use On For Use On |
---|
For Joining For Joining |
---|
|
|
Manufacturer Manufacturer |
---|
|
Manufacturer Model Number ManufacturerModel Number | Show |
---|
|
Manufacturer Model Number ManufacturerModel Number | Hide |
---|
Formulation Formulation |
---|
|
Peel Strength Peel Strength |
---|
|
Type Type |
---|
|
Cure Type Cure Type |
---|
|
Mix Ratio Mix Ratio |
---|
|
Approximate Coverage Approximate Coverage |
---|
|
Begins to Harden Begins to Harden |
---|
|
Clarity Clarity |
---|
|
Connection Type Connection Type |
---|
|
Consistency Consistency |
---|
|
Environment Environment |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Mixing Required Mixing Required |
---|
|
Reaches Full Strength Reaches Full Strength |
---|
|
Shear Strength Shear Strength |
---|
|
Viscosity Viscosity |
---|
|
Adhesive Type Adhesive Type |
---|
|
Elongation Elongation |
---|
|
More
Solvents, oils, acids, and other chemicals won't degrade the bond of these adhesives. They also resist moisture and UV rays. Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
The size listed is the combined total of the two parts. Use a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
Container | Strength | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs/sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | Environment | For Joining | Each | |
Lord Adhesives with Mixer Nozzle | ||||||||||||||
406/19 | 1.42 | Cartridge | 6 min. | 24 hrs. | 2,800 | 26 | 4:1 | Paste (220,000 cP) | -40° to 300° | Beige | Corrosive, Salt Spray | Metal, Plastic, Rubber, Composites | 00000000 | 000000 |