Manufacturer Manufacturer |
---|
|
Manufacturer Model Number ManufacturerModel Number | Show |
---|
|
Manufacturer Model Number ManufacturerModel Number | Hide |
---|
Maximum Temperature Maximum Temperature |
---|
|
Type Type |
---|
|
For Use Outdoors For Use Outdoors |
---|
|
Consistency Consistency |
---|
|
Formulation Formulation |
---|
|
Mix Ratio Mix Ratio |
---|
|
Color Color |
---|
![]() | Gray |
Heating Requirements to Reach Full Strength Heating Requirementsto Reach Full Strength |
---|
|
Begins to Harden Begins to Harden |
---|
|
Mixing Required Mixing Required |
---|
|
Approximate Coverage @ Thickness Approximate Coverage@ Thickness |
---|
|
Clarity Clarity |
---|
|
Container Size Container Size |
---|
|
Manufacturer Model Name Manufacturer Model Name |
---|
|
Maximum Thickness Maximum Thickness |
---|
|
Reaches Full Strength Reaches Full Strength |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
For use in processing equipment that carries large particles 1/16" in diameter and larger, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as pump housings, chute linings, and hoppers. The size listed is the combined total of the two parts.
Container | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, lbs. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Heating Requirements to Reach Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Max. Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Loctite® Nordbak Wearing Compound | |||||||||||||||
PC 7230 | 25 | Pail, Can | 30 | 2 | 2 hrs. @ 300° F | Paste | 4:1 | 1,240 sq. in. @ 1/4" | 1/4" | -20° to 450° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 000000 | 0000000 |