These jackets meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 4. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These jackets are made of a durable modacrylic/aramid blend. They have a flap in the front that conceals the zipper.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.

These sweatshirts meet NFPA 70E for protection against electrical arc flashes and NFPA 2112 for flame resistance. The front zipper is fully covered for complete protection from fire. Sweatshirts are made of a blended fleece for comfort and warmth. Knit cuffs and a knit waistband fit snugly to prevent heat from escaping.

Protect your arms and torso when welding.

Cotton is treated to protect against low radiant heat and minor sparks. Jackets with a 12 oz. material weight provide better durability and protection. They have one inside pocket.

Cotton/nylon blend (women's) is soft, lightweight, and protects against low radiant heat and sparks. These jackets have a more contoured and less rigid fit than men’s jackets. For extra protection, they have a hook and loop neck closure. Two waist pockets give you spots to store items.

Cotton and leather protects against low radiant heat with added cut protection and heat resistance on the sleeves. These jackets have a pocket on each sleeve, as well as an inside pocket.

Leather protects against radiant heat, flames, and welding sparks. It’s flexible and resists cuts and abrasion better than cotton. Brown leather jackets are designed with small vents under the arms and along the upper back to increase air circulation and cool you off. They have a pocket on each sleeve, as well as an inside pocket. Gray leather jackets have a higher material weight than brown leather jackets to provide better durability and protection.

Acrylic/Buna-N blend protects against radiant heat, flames, and welding sparks while providing superior breathability to leather. These jackets have two chest pockets.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.

Bright colors and reflective stripes make workers stand out in high-risk areas and where low-visibility is a concern. Made of polyester fabric, these vests are lightweight and moisture wicking to keep you cool.

ANSI/ISEA 107 rated vests are fluorescent yellow or orange and have 2" wide reflective stripes to meet high-visibility requirements. Class 2 vests meet visibility requirements for workers who are on or near roadways. Class 3 vests meet visibility requirements for workers in high-risk areas that need to be seen by traffic at a minimum distance of 1/4 of a mile.

Standard vests are a traditional, sleeveless style.

Expandable vests have elastic sides or adjustable side snaps that fit up to two sizes larger.

Vests that are breakaway and expandable have adjustable side straps to expand the sides, as well as hook and loop fasteners at the shoulders, sides, and front to tear away easily if caught on machinery.

Vests with sleeves resemble a t-shirt, providing more coverage for better visibility than standard vests.

Mesh vests provide better breathability than solid vests.

Women’s vests have an adjustable waist strap for a more contoured fit.

These vests meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 1 and ANSI/ISEA 107 standards for high visibility. They are rated ANSI Class 2 for working on or near roadways. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These vests are mesh acrylic and are self-extinguishing. They are stitched with Nomex thread for added durability. They have hook and loop closures down the front and one waist pocket.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these vests.

Bright colors and reflective stripes make workers stand out in high-risk areas and where low-visibility is a concern. Black fabric on the lower half keeps jackets looking cleaner longer than all-yellow jackets. These jackets meet Class 3 ANSI/ISEA 107 standards for workers that need to be seen by traffic at a minimum distance of 1/4 of a mile. They have a zipper down the front.

Polyester provides the comfort of a moisture-wicking sweatshirt with the warmth of a jacket.

Polyurethane-coated polyester is water resistant to keep you dry in wet and rainy environments. These jackets have a storm flap to keep rain out, as well as a removable fleece liner for added warmth and comfort. The outer shell has an inside pocket to protect contents from the elements. A compartment in the collar allows you to roll up and conceal the hood.

Made of a durable cotton/polyester blend, these jackets protect against dirt, wear, and abrasion in workshops and labs. They cover the top of your hips, have open cuffs, and buttons down the front. A wrinkle-resistant finish provides a professional look.

When measuring chest size for men's jackets, measure around the fullest part of your chest. Take all measurements over clothing you expect to wear under the jacket.

Protect sensitive equipment from damage and malfunction—these jackets quickly divert static electricity. Surface resistivity of unlaundered fabric is 10⁶ ohms. These jackets are made of a durable cotton/polyester blend to protect against wear and abrasion in workshops and labs. They have snaps down the front and adjustable snaps on the cuffs. Cuff snaps may also be attached to a grounding point. Jackets cover your hips and have one chest pocket and two waist pockets.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over clothing you expect to wear under the jacket.

Smocks wrap around the front and tie on the side. They are made of a durable cotton/polyester blend to protect against dirt, wear, and abrasion in workshops and labs. They are knee length and have open cuffs, one chest pocket, and two waist pockets. Hip slits provide access to pants pockets.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over clothing you expect to wear under the smock.

Just like the scrubs worn in hospitals, these shirts are soft and comfortable for all-day wear. They’re made of 55% cotton and 45% polyester. They are reversible with one chest pocket on each side.

When measuring chest size, measure around the fullest part of your chest.

These jackets protect you from the cold and wind while offering greater mobility than heavyweight coats. They have a zipper down the front.

Cotton/polyester jackets provide the comfort of a sweatshirt with the warmth of a jacket. Men’s cotton/polyester jackets have a knit waist and cuffs to trap heat and keep the jacket in place. They have two waist pockets. Women’s cotton/polyester jackets have a water-repellent finish to keep you dry. Adjustable hook and loop cuffs tighten to fit your wrists and expand to fit over gloves. These jackets come with a snap-on hood—tighten the draw cord for a snug fit to keep out wind. They have two waist pockets, a chest pocket, and an internal chest pocket.

Nylon jackets have a water-resistant shell and are more abrasion resistant than cotton/polyester jackets. They have a layer of polyester insulation to keep you warm in cold temperatures. Men’s nylon jackets have adjustable hook and loop cuffs; tighten to fit your wrist or expand to fit over gloves. They have two waist pockets and one chest pocket. Women’s nylon jackets have knit cuffs to trap heat and keep jackets in place. An attachable hood snaps onto these jackets and snaps closed for a snug fit to keep out wind. They have two waist pockets, one chest pocket, and two internal chest pockets.

Stay warm without the bulk of heavy coats and multiple layers. These jackets have a battery-operated heated core, so you can work comfortably in temperatures as low as -5° F. Adjust the temperature from low to high, as well as the areas you want to heat, with the touch of a button. Made of lightweight polyester, these jackets aren’t bulky, yet they’re water, wind, and abrasion resistant. They’re washer and dryer safe, making them easy to clean. Jackets have two heated waist pockets and a separate pocket for storing the battery. All include a long-lasting, rechargeable lithium-ion battery that provides up to eight hours of warmth and the battery charger.

Note: Battery life is significantly reduced when jackets are used at the high heat setting.

Men’s jackets have adjustable hook and loop cuffs that allow you to loosen and tighten them over gloves.

Women’s jackets have knit cuffs with thumb slots to trap heat and keep sleeves in place.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.

Keep dry in wet and rainy conditions. These jackets resist mildew and are washable. They have snaps down the front with a storm flap to help keep rain out, as well as snaps on the cuffs.

PVC-coated polyester provides good resistance to water and abrasion. These jackets have two waist pockets and an attached hood.

Gore-Tex/nylon blend is extremely durable. It provides excellent protection from water, wind, and abrasion, while allowing perspiration to evaporate to keep you cool. Fasten a hood (sold separately) to the collar snaps.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.

Bright colors and reflective stripes make workers stand out in low-visibility environments. These jackets meet ANSI/ISEA 107 Class 3 standards for workers in high-risk areas that need to be seen by traffic at a minimum distance of 1/4 of a mile. They are polyester to keep you dry in wet and rainy conditions. These jackets have a zipper down the front with a storm flap to keep rain out. They have hook and loop closures on the cuffs to modify the fit and two waist pockets.

Women’s jackets have a contoured fit. Fold them into their own hood or lower front pocket and zip them closed to pack them away. They have an adjustable elastic hem—cinch the toggle piece to tighten it and keep out rain at the bottom. To cool off while remaining dry, unzip the underarm vents.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.

Protect against chemical spills and splashes. These jackets are polyester with a PVC coating inside and out. Snaps down the front and a storm flap helps keep liquid splashes out. They have open cuffs.

Fasten a hood (sold separately) to jackets with collar snaps.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.

These jackets meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. They also meet ASTM F2733 standards for protection against flash fires. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These jackets are made of PVC-coated Nomex aramid. They have snaps down the front and a storm flap to keep rain out. They have hook and loop cuffs; tighten to fit your wrist or gloves.

Fasten a hood (sold separately) to the collar snaps.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.

Work safely near the water. These vests are international safety orange with reflective tape panels to draw attention to workers in low-visibility environments.

Vests are United States Coast Guard approved for use as safety equipment. Type III vests are for use near calm, inland waters where there is a high chance of immediate rescue. Type V vests are specifically approved for commercial work away from shore and must be worn at all times to meet USCG approval when working.

Nylon vests are soft and lightweight to keep you comfortable when working.

Nylon and polyester mesh vests have a mesh top, making them lighter and more breathable than nylon vests.

PVC vests have buckles in the front and snag-resistant belts to reduce the risk of catching on equipment.

Inflatable vests have a CO₂ cylinder that will automatically inflate the vest when submerged in water. They have a pull cord and tube to inflate manually. These vests are lightweight with a single buckle, so they’re easy to move around in.