Also known as nut eyebolts, these are designed for through-hole applications.

Also known as screw eyes, use the sharp point of these eyebolts to mount directly into wood.

Also known as machinery eyebolts.

These eyebolts retain their strength in temperatures as low as -40° F.

Route wire and cable through the smooth eye without snagging.

Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back to compensate for roll and sway when lifting heavy or unbalanced loads.

Remove the shackle after lifting while keeping the base installed for future use.

Wedge these hangers in concrete and other solid materials.

You can use these versatile hangers in a threaded hole (as you would a screw), or secure them with a nut (as you would a bolt).

The spring holds the washer and toggle against opposite sides of the wall, so everything's in position before you begin tightening. Once tightened, the spring adds vibration resistance.

Add an eye nut to threaded rod to hang the rod from rings, hooks, and hangers.

Anchor these ringbolts where you need them, then remove the ring when not in use. Once installed, the mounting bolt stays in place. Insert the ring by threading into the mounting bolt; remove by unthreading it.