For Removing For Removing |
---|
|
Specifications Met Specifications Met |
---|
|
Control Type Control Type |
---|
|
Mobility Mobility |
---|
|
Filter Efficiency Filter Efficiency |
---|
|
Environmental Rating Environmental Rating |
---|
More
Protect the health of nearby workers and maintain ideal operating conditions for your 3D printer. To keep your workspace's air clean, these enclosures filter harmful fumes, VOCs, and ultrafine particles that are common when working with filaments such as ABS and nylon. The enclosure's door is sealed with silicone rubber to keep fumes inside the enclosure.
Control Your Printing Environment
Because printing conditions that are too cold make weak parts, these enclosures retain the heat created by the printer. The warmth gives the printed layers time to strengthen and bond before cooling. Set the thermal overload protection, and you won't have to worry about the enclosure overheating. If the enclosure gets too warm, a sensor cuts power to the printer to avoid failed prints and dangerous conditions. It's also known as a thermal runaway cutoff.
Manage the enclosure's various settings—filter status, temperature shutoff, fan speed, lights, and WiFi—from the enclosure's touchscreen. The screen also displays the moisture level inside the enclosure. Add a dehumidifier cartridge (sold separately) or other desiccant to keep your filament dry, strong, and flexible. Dehumidifier cartridges have rechargeable desiccant beads. When the desiccant beads change from orange to green, heat them in the microwave to recharge.
Connect To Your Computer
Connect the printer to a computer using the through-wall USB port, and the enclosure stays sealed. The printer connects to the port on one side of the wall, and the computer connects on the other. A similar port connects your printer's power cord. Safely check on the progress of your prints from your computer using the video camera.
Protect Your Printer and Prints
Lightweight and strong, these enclosures have an aluminum frame, honeycomb floor, and clear, impact-resistant windows. A lock on the door prevents unwanted users from accessing your printer and work.
Specifications Met
Made to high domestic and international safety standards, these enclosures are UL certified and CE marked. The filter system meets UL 94V0 for flame resistance.
Overall | Inside | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Airflow, cfm | Ht. | Wd. | Dp. | Ht. | Wd. | Dp. | Filter Efficiency | Removes Particle Size Down To, microns | Environment Temp. Range | Includes | Specifications Met | For Removing | Assembled or Unassembled | Each | |
120V AC/240V AC—Three-Prong Plug | |||||||||||||||
Powder-Coated Aluminum—Silicone Rubber Seal | |||||||||||||||
150 | 37 3/8" | 31 1/2" | 31 7/8" | 31 7/8" | 23 5/8" | 23 5/8" | 99.95% | 0.015 | 16° C to 27° C 60° F to 80° F | Disposable After-Filter, Disposable HEPA Filter, Tool Kit | CE Marked, UL 94V0, UL Certified | Dust and Particles, Odors and Fumes | Assembled | 0000000 | 000000000 |
150 | 37 3/8" | 40 1/8" | 40 1/8" | 31 7/8" | 31 7/8" | 31 7/8" | 99.95% | 0.015 | 16° C to 27° C 60° F to 80° F | Disposable After-Filter, Disposable HEPA Filter, Tool Kit | CE Marked, UL 94V0, UL Certified | Dust and Particles, Odors and Fumes | Assembled | 0000000 | 00000000 |
Clear your 3D printer’s extruder with these cleaning filaments. The compound in the filaments bonds to leftover material, flushing it out as the compound passes through. Run a filament through your extruder before switching to a new printing job to remove old materials or colors that could bleed over or jam the printer. Even if you’re not changing jobs, use these filaments to periodically purge residue from your system to keep it printing smoothly. At 8" long, each filament is sized for a single use, so there’s no need to cut them to size.
Draw particles and filament fumes away from open-frame 3D printers without cooling off printed parts. Unlike standard air cleaners, which create airflow strong enough to cool the print area and warp your parts, these low-airflow cleaners won’t disrupt your print. A three-part filtering process keeps you from breathing harmful emissions: a prefilter traps large particles, then a combination HEPA and activated carbon filter captures both fine particles and fumes. These CE marked cleaners meet health, safety, and environmental protection standards for products.
Attach the included hose and funnel to the cleaner to pull fumes directly from your printer. These compact, lightweight cleaners fit into most work areas, and are quiet enough for office use. The powder-coated steel housing holds up over a long service life.
Overall | Hose | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Airflow, cfm | Volume | Current, A | Voltage | For Inlet Duct Dia. | Ht. | Wd. | Dp. | Housing Material | Lg., ft. | Material | Cord Lg., ft. | Includes | Each | |
26 | 44 dB @ 3 ft. | 0.2 | 120V AC | 2" | 13 1/4" | 11 1/4" | 11" | Powder-Coated Steel | 6 | Plastic | 6 | Combination HEPA/Chemical Filter (Captures 99.99% of particles down to 0.03 microns), Disposable Prefilter | 0000000 | 0000000 |
Simultaneously clean up and neutralize metal powders and other combustible dust, such as coal, plastic, and flour. These vacuums collect combustible dust in a bag, then submerge the bag in a water or mineral oil bath. This makes the dust inert. Because some metal powders emit gas when added to an immersion bath, the vacuums also have a degassing valve to vent any gas that builds up.
The vacuum and tools dissipate static, so they won’t suddenly discharge electricity that could ignite your powder or nearby gases. The nozzle and crevice tool are small enough to use in compact spaces, such as 3D printer housings.
These vacuums are CSA certified for use in all NEC Class II environments—those where combustible dusts are present under normal operating conditions. In addition, they’re also certified for use in Class I, Divisions 1 and 2, Group D environments, so they can be used in environments where flammable gases, vapors, and liquids with characteristics similar to propane can be found under normal operating conditions.
Hose | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap., gal. | Ht. | Wd. | Dp. | hp | Current, A | Voltage | Filter Efficiency | Dia. | Lg., ft. | Cord Lg., ft. | Environmental Rating | Includes | Each | |
Stainless Steel Tank | ||||||||||||||
1 1/2 | 53" | 22" | 26" | 1.3 | 9 | 120V AC | 99.97% @ 0.3 microns | 1 1/2" | 10 | 50 | NEC Class I Divisions 1, 2 Group D NEC Class II Divisions 1, 2 Groups E, F, G IEC Zone 1 Group IIA IEC Zone 21 Groups IIIC, IIIB, IIIA IP60 | Crevice Tool, Curved-Tip Nozzle, Four Collection Bags, Round Brush | 000000 | 000000000 |