Component Component | Show |
|---|
|
Component Component | Hide |
|---|
Wire Connection Type Wire Connection Type |
|---|
 | Wire Leads |
Environment Environment |
|---|
|
Environmental Rating Environmental Rating |
|---|
Choosing a Proximity Switch
More
Light Beam Safety Barrier Switches
Immediately cut power to machinery by breaking the light beam between the two barriers. Light beams can travel up to 32 feet between the transmitter and receiver. For a complete system, combine a transmitter, receiver, safety relay, and connectors (sold separately). Switches will automatically produce PNP or NPN signal output based on the device they are connected to. To selectively allow material to pass through the sensing field, you can program the system to allow one or more beams to be broken without shutting off your machine.
Note: These switches cannot be used with a full-revolution clutch press or machine. Use only with machinery that can consistently and immediately stop anywhere in its cycle.
For technical drawings and 3-D models, click on a part number.
| Wire Connection Type | No. of Wire Leads | Cable Lg., ft. | Each | |
| Wire Leads | 5 | 32.5 | 0000000 | 000000 |
Long Distance Light Beam Safety Barrier Switches
Transmit a beam of light up to 225 ft. from the transmitter to the receiver. They immediately cut power to machinery by breaking the light beam between the transmitter and receiver. A complete system requires a transmitter, receiver, transmitter connector, and receiver connector (sold separately). All are rated IP67 for protection from washdowns and temporary submersion. Note: Use only with machinery that can consistently and immediately stop anywhere in its cycle; do not use with a full-revolution clutched press or machine.
For technical drawings and 3-D models, click on a part number.
| Wire Connection Type | No. of Wire Leads | Cable Lg., ft. | Each | |
| Wire Leads | 3 | 32 | 0000000 | 0000000 |