Desiccant Material Desiccant Material |
|---|
|
For Area For Area |
|---|
For Removing For Removing |
|---|
|
Removal Capacity Removal Capacity |
|---|
|
Dehumidifying Cabinet Type Dehumidifying Cabinet Type |
|---|
|
Mobility Mobility |
|---|
|
Useful Life Useful Life |
|---|
|
Plug Type Plug Type |
|---|
|
Dehumidifying Cabinets
Store and protect 3D printer filaments, optical equipment, and other sensitive material in a humidity-controlled environment. Also known as dry boxes and desiccator cabinets, these cabinets prevent moisture-sensitive 3D printer filaments, such as nylon, ABS, and polycarbonate, from becoming brittle, discolored, or broken. They also keep sensitive electrical and optical equipment, such as microscopes and lenses, free from mold and fungus. Their moisture-absorbing desiccants recharge automatically, so you don't have to remember to charge them yourself or worry about the humidity rising unintentionally.
Standard cabinets are sized to store small equipment, such as flasks and lenses, as well as small filament spools. The desiccants recharge every 20 minutes to keep relative humidity below 30%. Although you cannot set the humidity to a specific level, a humidity meter on the door lets you check the reading.
Designed with 3D printing in mind, cabinets with filament feed ports are large enough to hold up to six 12"-dia. filament spools. They also have four filament feed ports, so you can keep filament dry while still feeding a printer, ensuring the filament doesn't go bad in the middle of a longer job. These cabinets can lower relative humidity to less than 5%; set and monitor the level using the digital display.
Overall | Shelf | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Dp. | Cap., lbs. | Type (No. of) | Cap., lbs. | Ctr.-to-Ctr. Adjustments | Relative Humidity | Desiccant Material | Material | Plug Type | Cord Lg., ft. | Each | |
Assembled | |||||||||||||
| 12 1/2" | 13 1/2" | 16 1/2" | 80 | Adjustable (2) | 40 | 4" | <30% | Silica Gel | Plastic | Two Prong | 8 | 0000000 | 0000000 |
| 20 1/2" | 13 1/2" | 16 1/2" | 120 | Adjustable (3) | 40 | 4" | <30% | Silica Gel | Plastic | Two Prong | 8 | 0000000 | 00000000 |
Overall | Shelf | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Dp. | Cap., lbs. | Type (No. of) | Cap., lbs. | Ctr.-to-Ctr. Adjustments | Relative Humidity | Desiccant Material | For Filament Dia., mm | Material | Window Material | Plug Type | Cord Lg., ft. | Features | Each | |
Assembled | ||||||||||||||||
| 34" | 18 1/2" | 18 1/2" | 90 | Adjustable (3) | 30 | 1 1/2" | <5% | Molecular Sieve | 1.75-2.85 | Powder-Coated Steel | Glass | Three Prong | 6 1/2 | Digital Humidity Control and Display | 0000000 | 000000000 |
Desiccant Bags
Remove moisture from sealed containers during shipping and storage.
These desiccants are best when relative humidity is at least 40%. The area covered is calculated at 77° F and 40% relative humidity.
| For Area, cu. in. | Removal Capacity | Lg. | Wd. | Wt., oz. | Bag Material | Pkg. Qty. | Pkg. | |
Small Pack | ||||||||
|---|---|---|---|---|---|---|---|---|
Silica Gel | ||||||||
| 2 | Up to 32% of desiccant weight | 3/4" | 5/8" | 0.01 | Tyvek | 10 | 0000000 | 00000 |
| 3 | Up to 32% of desiccant weight | 1 1/8" | 5/8" | 0.02 | Tyvek | 10 | 0000000 | 0000 |
| 4 | Up to 32% of desiccant weight | 1 1/4" | 5/8" | 0.03 | Tyvek | 10 | 0000000 | 0000 |
| 6 | Up to 32% of desiccant weight | 1 3/8" | 3/4" | 0.04 | Tyvek | 10 | 0000000 | 0000 |
| 24 | Up to 32% of desiccant weight | 1 3/4" | 1" | 0.11 | Tyvek | 10 | 0000000 | 0000 |
| 235 | Up to 32% of desiccant weight | 2 3/4" | 1" | 0.21 | Tyvek | 10 | 0000000 | 0000 |
| 1,425 | Up to 32% of desiccant weight | 6" | 1 1/2" | 1 | Tyvek | 5 | 0000000 | 0000 |
| 2,850 | Up to 32% of desiccant weight | 6" | 5" | 2 | Tyvek | 5 | 0000000 | 00000 |
| 5,700 | Up to 32% of desiccant weight | 7 1/8" | 5" | 4 | Tyvek | 2 | 0000000 | 0000 |
| 11,425 | Up to 32% of desiccant weight | 8 1/2" | 5" | 8 | Tyvek | 2 | 0000000 | 00000 |
| 22,850 | Up to 32% of desiccant weight | 9 1/4" | 7 1/2" | 16 | Tyvek | 1 | 0000000 | 00000 |
Large Pack | ||||||||
Silica Gel | ||||||||
| 2 | Up to 32% of desiccant weight | 3/4" | 5/8" | 0.01 | Tyvek | 3,000 | 0000000 | 000000 |
| 3 | Up to 32% of desiccant weight | 1 1/8" | 5/8" | 0.02 | Tyvek | 2,000 | 0000000 | 00000 |
| 4 | Up to 32% of desiccant weight | 1 1/4" | 5/8" | 0.03 | Tyvek | 1,500 | 0000000 | 00000 |
| 6 | Up to 32% of desiccant weight | 1 3/8" | 3/4" | 0.04 | Tyvek | 1,000 | 0000000 | 00000 |
| 24 | Up to 32% of desiccant weight | 1 3/4" | 1" | 0.11 | Tyvek | 400 | 0000000 | 00000 |
| 235 | Up to 32% of desiccant weight | 2 3/4" | 1" | 0.21 | Tyvek | 250 | 0000000 | 00000 |
| 1,425 | Up to 32% of desiccant weight | 6" | 1 1/2" | 1 | Tyvek | 300 | 0000000 | 000000 |
| 2,850 | Up to 32% of desiccant weight | 6" | 5" | 2 | Tyvek | 150 | 0000000 | 000000 |
| 5,700 | Up to 32% of desiccant weight | 7 1/8" | 5" | 4 | Tyvek | 100 | 0000000 | 000000 |
| 11,425 | Up to 32% of desiccant weight | 8 1/2" | 5" | 8 | Tyvek | 50 | 0000000 | 000000 |
| 22,850 | Up to 32% of desiccant weight | 9 1/4" | 7 1/2" | 16 | Tyvek | 30 | 0000000 | 000000 |
Indicating Desiccant Bags
Know when it's time to change these desiccants—they turn from blue to pink after absorbing 8% of their weight. Use to remove moisture from sealed containers during shipping and storage.
These desiccants are best when relative humidity is at least 40%. The area covered is calculated at 77° F and 40% relative humidity.
The bags have a monitoring window to check for desiccant color change.
| For Area, cu. in. | Removal Capacity | Lg. | Wd. | Wt., oz. | Bag Material | Pkg. Qty. | Pkg. | |
Small Pack | ||||||||
|---|---|---|---|---|---|---|---|---|
Silica Gel | ||||||||
| 2 | Up to 30% of desiccant weight | 7/8" | 5/8" | 0.01 | Tyvek | 10 | 0000000 | 00000 |
| 3 | Up to 30% of desiccant weight | 1 1/8" | 5/8" | 0.02 | Tyvek | 10 | 0000000 | 0000 |
| 4 | Up to 30% of desiccant weight | 1 3/8" | 5/8" | 0.03 | Tyvek | 10 | 000000 | 0000 |
| 6 | Up to 30% of desiccant weight | 1 3/8" | 7/8" | 0.04 | Tyvek | 10 | 0000000 | 0000 |
| 18 | Up to 30% of desiccant weight | 1 3/4" | 1" | 0.11 | Tyvek | 10 | 0000000 | 0000 |
| 36 | Up to 30% of desiccant weight | 2 5/8" | 1" | 0.21 | Tyvek | 10 | 0000000 | 0000 |
| 60 | Up to 30% of desiccant weight | 2 3/4" | 1 1/2" | 0.35 | Tyvek | 10 | 0000000 | 00000 |
| 85 | Up to 30% of desiccant weight | 3 1/8" | 1 1/2" | 0.5 | Tyvek | 10 | 0000000 | 00000 |
Large Pack | ||||||||
Silica Gel | ||||||||
| 2 | Up to 30% of desiccant weight | 7/8" | 5/8" | 0.01 | Tyvek | 3,000 | 0000000 | 00000 |
| 3 | Up to 30% of desiccant weight | 1 1/8" | 5/8" | 0.02 | Tyvek | 2,000 | 0000000 | 00000 |
| 4 | Up to 30% of desiccant weight | 1 3/8" | 5/8" | 0.03 | Tyvek | 1,500 | 0000000 | 00000 |
| 6 | Up to 30% of desiccant weight | 1 3/8" | 7/8" | 0.04 | Tyvek | 1,000 | 0000000 | 00000 |
| 18 | Up to 30% of desiccant weight | 1 3/4" | 1" | 0.11 | Tyvek | 400 | 0000000 | 00000 |
| 36 | Up to 30% of desiccant weight | 2 5/8" | 1" | 0.21 | Tyvek | 300 | 0000000 | 00000 |
| 60 | Up to 30% of desiccant weight | 2 3/4" | 1 1/2" | 0.35 | Tyvek | 150 | 0000000 | 00000 |
| 85 | Up to 30% of desiccant weight | 3 1/8" | 1 1/2" | 0.5 | Tyvek | 115 | 0000000 | 00000 |
Odor-Removal Desiccant Bags
These desiccant bags contain carbon to remove odors as well as moisture from sealed containers during shipping and storage. They are best when relative humidity is at least 40%.
The area covered is calculated at 77° F and 40% relative humidity.
| For Area, cu. in. | Removal Capacity | Lg. | Wd. | Wt., oz. | Bag Material | Pkg. Qty. | Pkg. | |
Small Pack | ||||||||
|---|---|---|---|---|---|---|---|---|
Silica Gel and Carbon | ||||||||
| 3 | Up to 25% of desiccant weight | 1 1/2" | 3/4" | 0.04 | Tyvek | 10 | 0000000 | 00000 |
| 6 | Up to 25% of desiccant weight | 1 7/8" | 7/8" | 0.07 | Tyvek | 10 | 0000000 | 0000 |
| 15 | Up to 25% of desiccant weight | 3" | 1" | 0.18 | Tyvek | 10 | 0000000 | 0000 |
Large Pack | ||||||||
Silica Gel and Carbon | ||||||||
| 3 | Up to 25% of desiccant weight | 1 1/2" | 3/4" | 0.04 | Tyvek | 1,000 | 0000000 | 00000 |
| 6 | Up to 25% of desiccant weight | 1 7/8" | 7/8" | 0.07 | Tyvek | 600 | 0000000 | 00000 |
| 15 | Up to 25% of desiccant weight | 3" | 1" | 0.18 | Tyvek | 250 | 0000000 | 00000 |
Rechargeable Small-Space Dehumidifiers
Place these dehumidifiers in small spaces to protect moisture-sensitive materials such as photo lenses or 3D printing filaments. They absorb moisture with a silica gel that changes color, letting you know when they’re saturated. While they don’t need a battery or power cord during use, you do plug them in to dry them out—unlike other desiccants, they don’t require an oven.
3D Printer Air Filtering and Conditioning Enclosures
Protect the health of nearby workers and maintain ideal operating conditions for your 3D printer. To keep your workspace's air clean, these enclosures filter harmful fumes, VOCs, and ultrafine particles that are common when working with filaments such as ABS and nylon. The enclosure's door is sealed with silicone rubber to keep fumes inside the enclosure.
Control Your Printing Environment
Because printing conditions that are too cold make weak parts, these enclosures retain the heat created by the printer. The warmth gives the printed layers time to strengthen and bond before cooling. Set the thermal overload protection, and you won't have to worry about the enclosure overheating. If the enclosure gets too warm, a sensor cuts power to the printer to avoid failed prints and dangerous conditions. It's also known as a thermal runaway cutoff.
Manage the enclosure's various settings—filter status, temperature shutoff, fan speed, lights, and WiFi—from the enclosure's touchscreen. The screen also displays the moisture level inside the enclosure. Add a dehumidifier cartridge (sold separately) or other desiccant to keep your filament dry, strong, and flexible. Dehumidifier cartridges have rechargeable desiccant beads. When the desiccant beads change from orange to green, heat them in the microwave to recharge.
Connect To Your Computer
Connect the printer to a computer using the through-wall USB port, and the enclosure stays sealed. The printer connects to the port on one side of the wall, and the computer connects on the other. A similar port connects your printer's power cord. Safely check on the progress of your prints from your computer using the video camera.
Protect Your Printer and Prints
Lightweight and strong, these enclosures have an aluminum frame, honeycomb floor, and clear, impact-resistant windows. A lock on the door prevents unwanted users from accessing your printer and work.
Specifications Met
Made to high domestic and international safety standards, these enclosures are UL certified and CE marked. The filter system meets UL 94V0 for flame resistance.
Overall | Inside | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Airflow, cfm | Ht. | Wd. | Dp. | Ht. | Wd. | Dp. | Filter Efficiency | Removes Particle Size Down To, microns | Environment Temp. Range | Includes | Specifications Met | For Removing | Assembled or Unassembled | Each | |
120V AC/240V AC—Three-Prong Plug | |||||||||||||||
Powder-Coated Aluminum—Silicone Rubber Seal | |||||||||||||||
| 150 | 37 3/8" | 31 1/2" | 31 7/8" | 31 7/8" | 23 5/8" | 23 5/8" | 99.95% | 0.015 | 16° C to 27° C 60° F to 80° F | Disposable After-Filter, Disposable HEPA Filter, Tool Kit | CE Marked, UL 94V0, UL Certified | Dust and Particles, Odors and Fumes | Assembled | 0000000 | 000000000 |
| 150 | 37 3/8" | 40 1/8" | 40 1/8" | 31 7/8" | 31 7/8" | 31 7/8" | 99.95% | 0.015 | 16° C to 27° C 60° F to 80° F | Disposable After-Filter, Disposable HEPA Filter, Tool Kit | CE Marked, UL 94V0, UL Certified | Dust and Particles, Odors and Fumes | Assembled | 0000000 | 00000000 |
Humidity and Temperature Meters
Relative Humidity | Temperature | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Range | Accuracy | Indoor Range | Accuracy | Ht. | Wd. | Dp. | Digit Ht. | Battery Size | No. of Batteries Required | Batteries Included | Mounting Hole Dia. (No. of) | Fasteners Included | Each | |
| 10 to 95% | ±5% | -40° to 158° F/-40° to 70° C | ±2º F/±1° C | 2 7/8" | 4 3/4" | 9/16" | 1/2" | AAA | 2 | No | 1/4" (2) | No | 00000000 | 000000 |
| 25 to 95% | ±5% | 32° to 122° F/0° to 50° C | ±2º F/±1° C | 3 7/8" | 2 5/8" | 5/8" | 5/8" | AAA | 2 | Yes | 3/32" (2) | No | 00000000 | 00000 |
Humidity-Indicating Cards with Calibration Certificate
Monitor current humidity levels in addition to maximum humidity exposure with these humidity-indicating cards that include a calibration certificate traceable to NIST that states they’ve passed a test for accuracy. The maximum humidity scale has dots that permanently change color when the humidity level reaches each humidity point. The current humidity scale is reversible and changes color as humidity increases or decreases.
Indicator Use | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Current Relative Humidity Point | Max. Relative Humidity Point | Accuracy | Container Type | Ht. | Wd. | Current Relative Humidity | Max. Relative Humidity | Pkg. Qty. | Pkg. | |
| 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90%, 100% | 50%, 60%, 70%, 80%, 90% | ±5% | Box | 4" | 4" | Continuous | One Time | 2 | 0000000 | 000000 |