Jar Fillers | McMaster-Carr

Clear All

	For Use On For Use On

	Container Type Container Type	Show

	Jar

	Container Type Container Type	Hide


Tube	Can

Bottle	Cartridge

Syringe	Jar

Pail	Stick

Aerosol Can	Jug

Mixer Cup	Single-Use Packet

Pen	Patch

Bag	Strip

Box	One-Time-Use Capsule

Sausage Pack	Roll

Drum	Cylinder

Brush-Top Bottle	Brush-Top Can

Nozzle-Top Can

	Color Color

	Gray		White
	Aluminum		Dark Gray
	Blue		Green
	Bronze		Tan
	Light Amber		Silver

	Consistency Consistency

	Type Type

Surface Filler

Thread Sealant

	Finishing Method Finishing Method

	Manufacturer Model Name Manufacturer Model Name

Fixmaster Aluminum
Liquid

Fixmaster Aluminum Putty

Fixmaster Stainless Steel
Putty

Fixmaster Steel Putty

Fixmaster Superior Metal

Fixmaster Wear Resistant
Putty

Nordbak Wearing
Compound

Plastic Steel® 5 Minute
Putty

Plastic Steel® Liquid

Plastic Steel® Putty

Stainless Steel Putty

Titanium Putty

	Container Size Container Size

	Formulation Formulation

	Manufacturer Model Number Manufacturer Model Number

10110
10120
10210
10220
10240
10260
10270
10610
10620
10710
10720
10760
10770
10780
EA 3471
EA 3473
EA 3476
EA 3478
PC 3466
PC 7218
PC 7222
PC 7254
PC 7357
PC 9599

	Maximum Temperature Maximum Temperature

Less than 250° F

250° to 499° F

500° to 999° F

	Manufacturer Manufacturer

Devcon

Loctite®

	Maximum Thickness Maximum Thickness

	For Use Outdoors For Use Outdoors

Yes

	Begins to Harden Begins to Harden

	Mixing Required Mixing Required

Yes

	Approximate Coverage @ Thickness Approximate Coverage @ Thickness

	Reaches Full Strength Reaches Full Strength

	Mix Ratio Mix Ratio

	Clarity Clarity

Semi-Clear

Opaque

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	Minimum Temperature Minimum Temperature

	Material Material

Boron Nitride

View catalog pages (12)

Forward

How can we improve?

39 Products

About Sealant Flexibility

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.

Devcon Aluminum Liquid, Devcon Aluminum Putty, and Devcon FasMetal™ 10 HVAC Repair form a nonrusting finish.

	Container
Mfr. Model No.	Size	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Devcon Aluminum Liquid
10710	1 lbs.	Jar	75	16 hrs.	Thick Liquid	9:1	70 sq. in. @ 1/4"	-40° to 250°	Aluminum	Machine, Drill, Sand, Saw, Tap	Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood	00000000	000000
10720	3 lbs.	Jar	75	16 hrs.	Thick Liquid	9:1	210 sq. in. @ 1/4"	-40° to 250°	Aluminum	Machine, Drill, Sand, Saw, Tap	Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood	00000000	000000
Devcon Aluminum Putty
10610	1 lbs.	Jar	60	16 hrs.	Putty	9:1	70 sq. in. @ 1/4"	-40° to 250°	Aluminum	Machine, Drill, Sand, Saw, Tap	Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood	00000000	00000
10620	3 lbs.	Jar	60	16 hrs.	Putty	9:1	210 sq. in. @ 1/4"	-40° to 250°	Aluminum	Machine, Drill, Sand, Saw, Tap	Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood	00000000	000000

Water-Resistant Surface Fillers

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.

Paste fillers resist alkalies, solvents, gasoline, and oil.

Container
Size, oz.	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Max. Thick.	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Surface Fillers
2	Jar, Bottle	20	60 min.	Paste	5:1	8 1/2 sq. in. @ 1/4"	1 1/2"	Yes	Not Rated to 185°	White	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood	0000000	000000
2	Jar, Bottle	20	60 min.	Paste	5:1	8 1/2 sq. in. @ 1/4"	1 1/2"	Yes	Not Rated to 250°	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood	0000000	00000
12	Jar	30	24 hrs.	Paste	1:1	85 sq. in. @ 1/4"	1"	Yes	50° to 210°	White	Drill, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood	0000000	00000
14	Can, Jar	20	60 min.	Paste	5:1	62 sq. in. @ 1/4"	1 1/2"	Yes	Not Rated to 185°	White	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood	0000000	00000
14	Can, Jar	20	60 min.	Paste	5:1	62 sq. in. @ 1/4"	1 1/2"	Yes	Not Rated to 250°	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood	0000000	00000

Surface Fillers for Metal

Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal. The size listed is the combined total of the two parts.

Loctite® Fixmaster Aluminum Liquid and Loctite® Fixmaster Aluminum Putty form a nonrusting finish.

Loctite EA 3471 and PC2 35642 have stronger adhesion than any other surface fillers we offer.

Devcon Plastic Steel surface fillers can repair areas where brazing and welding is impractical.

NSF/ANSI 61 surface fillers meet safety standards for use with drinking water.

	Container
Mfr. Model No.	Size	Type	Begins to Harden, min.	Reaches Full Strength, hrs.	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Temp. Range, °F	Color	Specifications Met	Finishing Method	For Use On		Each
Loctite® Fixmaster Aluminum Liquid
PC 3466	1 lbs.	Jar, Can	20	24	Thick Liquid	5:1	60 sq. in. @ 1/4"	-20° to 200°	Gray	__	Machine, Drill, Tap	Aluminum	0000000	0000000
Loctite® Fixmaster Aluminum Putty
PC 7254	1 lbs.	Jar	20	24	Paste	4:1	70 sq. in. @ 1/4"	-20° to 200°	Gray	__	Machine, Drill, Tap	Aluminum	0000000	00000
Loctite® Fixmaster Steel Putty
EA 3471	1 lbs.	Jar	30	24	Thick Liquid	2.5:1	40 sq. in. @ 1/4"	-20° to 220°	Gray	__	Machine, Drill, Tap	Bronze, Copper, Steel, Stainless Steel, Cast Iron	0000000	00000
EA 3473	1 lbs.	Jar	3	24	Paste	1:1	50 sq. in. @ 1/4"	-20° to 190°	Gray	__	Machine, Drill, Tap	Bronze, Copper, Steel, Stainless Steel, Cast Iron	0000000	00000
Loctite® Fixmaster Stainless Steel Putty
EA 3476	1 lbs.	Jar	20	24	Paste	4:1	30 sq. in. @ 1/4"	-20° to 220°	Gray	__	Machine, Drill, Tap	Bronze, Copper, Steel, Stainless Steel, Cast Iron	0000000	00000
Devcon Plastic Steel® Liquid
10210	1 lbs.	Jar, Can	45	16	Thick Liquid	9:1	50 sq. in. @ 1/4"	-40° to 250°	Dark Gray	__	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Copper, Stainless Steel, Cast Iron	00000000	00000
10220	4 lbs.	Jar, Can	45	16	Thick Liquid	9:1	200 sq. in. @ 1/4"	-40° to 250°	Dark Gray	__	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Copper, Stainless Steel, Cast Iron	00000000	000000
Devcon Plastic Steel® Putty
10110	1 lbs.	Jar, Can	45	16	Putty	9:1	40 sq. in. @ 1/4"	-40° to 250°	Gray	__	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Copper, Stainless Steel, Cast Iron	00000000	00000
10120	4 lbs.	Jar, Can	45	16	Putty	9:1	190 sq. in. @ 1/4"	-40° to 250°	Gray	__	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Copper, Stainless Steel, Cast Iron	00000000	000000
Devcon Plastic Steel® 5 Minute Putty
10240	1 lbs.	Jar, Can	5	16	Putty	1.7:1	40 sq. in. @ 1/4"	-40° to 200°	Dark Gray	__	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Copper, Stainless Steel, Cast Iron	00000000	00000
Devcon Bronze Putty
10260	1 lbs.	Jar, Can	35	16	Putty	9:1	50 sq. in. @ 1/4"	-40° to 250°	Bronze	__	Machine, Drill, Sand, Saw, Tap	Brass, Bronze	00000000	000000
Devcon Stainless Steel Putty
10270	1 lbs.	Jar, Can	60	16	Putty	11:1	50 sq. in. @ 1/4"	-40° to 250°	Dark Gray	NSF/ANSI 61	Machine, Drill, Sand, Saw, Tap	Stainless Steel	00000000	000000
Devcon FasMetal™ Putty
10780	0.75 lbs.	Jar, Can	4	16	Putty	1:1	60 sq. in. @ 1/4"	-40° to 250°	Gray	__	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium	00000000	000000

Fine-Particle Abrasion-Resistant Surface Fillers for Metal

For use in processing equipment that carries particles smaller than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings. The size listed is the combined total of the two parts.

Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ACTIVITY after your order ships.

	Container
Mfr. Model No.	Size, lbs.	Type	Begins to Harden, min.	Reaches Full Strength, hrs.	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Max. Thick.	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Loctite® Fixmaster Wear Resistant Putty
PC 7222	1	Jar	30	24	Putty	2:1	50 sq. in. @ 1/4"	1"	Yes	-20° to 220°	Gray	Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium	0000000	000000

Large-Particle Abrasion-Resistant Surface Fillers for Metal

For use in processing equipment that carries large particles 1/16" in diameter and larger, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as pump housings, chute linings, and hoppers. The size listed is the combined total of the two parts.

	Container
Mfr. Model No.	Size, lbs.	Type	Begins to Harden, min.	Reaches Full Strength, hrs.	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Max. Thick.	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Loctite® Nordbak Wearing Compound
PC 7218	5	Jar, Can	30	7	Paste	2:1	260 sq. in. @ 1/4"	1/4"	-15° to 250°	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium	000000	0000000
PC 7357	6	Jar, Can	25	8	Paste	2:1	310 sq. in. @ 1/4"	1/4"	-20° to 250°	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium	0000000	000000
PC 9599	6	Jar, Can	10	3	Paste	2:1	310 sq. in. @ 1/4"	1/4"	-20° to 220°	Blue	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium	000000	000000

Chemical-Resistant Surface Fillers for Metal

Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.

	Container
Mfr. Model No.	Size	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Mix Ratio	Approximate Coverage @ Thick.	Max. Thick.	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Loctite® Fixmaster Superior Metal
EA 3478	1 lbs.	Jar	20	24 hrs.	Paste	4:1	30 sq. in. @ 1/4"	1"	Yes	-20° to 250°	Gray	Machine, Drill	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium	0000000	0000000
Devcon Titanium Putty
10760	1 lbs.	Jar	20	16 hrs.	Putty	4.3:1	40 sq. in. @ 1/4"	3/4"	Yes	-40° to 350°	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium	0000000	000000
10770	2 lbs.	Jar	20	16 hrs.	Putty	4.3:1	90 sq. in. @ 1/4"	3/4"	Yes	-40° to 350°	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium	00000000	000000

Conductive Surface Fillers for Electronics

A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components.

Surface fillers in one-time-use packets and jars come as two parts. The size listed is the combined total of the two parts.

Volume resistivity and surface resistivity measure how well a material opposes the flow of electricity. The lower the rating, the more electricity it conducts.

Thermal conductivity measures a material’s ability to transfer heat. The higher the rating, the more heat it transfers.

Container							Temp. Range, °F
Size, oz.	Type	Begins to Harden	Reaches Full Strength	Thermal Conductivity, W/m-K	Volume Resistivity, ohms-cm	Mix Ratio	Min.	Max.	For Use On		Each
Surface Fillers
0.5	Jar	4 hrs.	5 days	5.77	0.0004	1:1	Not Rated	300°	Aluminum, Brass, Copper, Steel, Stainless Steel	0000000	0000000
1	Jar	4 hrs.	5 days	5.77	0.0004	1:1	Not Rated	300°	Aluminum, Brass, Copper, Steel, Stainless Steel	0000000	000000

Deep-Crack Concrete Fillers

Fill cracks up to 10" deep on vertical and overhead surfaces. To use this filler, secure the included injection ports to the crack with the two-part epoxy sealer, then spread sealer over the entire crack. Allow sealer 24 hours to cure. Application time for sealer, after mixing, is 40 minutes. To fill the rest of the void, use the cartridge with a standard caulk gun (sold separately) to dispense the two-part epoxy filler into the injection ports.

Sealant		Filler
Container Size, oz.	Container Type	Container Size, oz.	Container Type	Begins to Harden, min.	Reaches Full Strength, hrs.	Consistency	Mix Ratio	Color	For Max. Crack Wd.	Approx. Coverage @ Thick.	Application Temp. Range, °F	Finishing Method	For Use On		Each
34	Jar	10	Cartridge	15	24	Thin Liquid	1:1	Light Amber	1/4"	8 ft. @ 10"	50° to 90°	Sand, Tap	Concrete	00000000	000000

Spackling Compounds

Fill and conceal small cracks, nail holes, and blemishes. Compounds are ready to use.

	Container
For Max. Crack Wd.	Size	Type	Consistency	Approximate Coverage @ Thick.	Temp. Range, °F	Color	Finishing Method	For Use Outdoors	For Use On		Each
1/4"	8 oz.	Jar	Paste	Not Rated	0° to 150°	White	Sand	No	Drywall, Plaster, Wood	0000000	00000
1/4"	1 qt.	Jar	Paste	Not Rated	0° to 150°	White	Sand	No	Drywall, Plaster, Wood	0000000	0000

Drywall Crack Fillers

Fix cracks in drywall and stop them from spreading. Place the included fabric over wall cracks and cover with the acrylic paste. This results in a flexible, nonshrinking repair that prevents cracks from reappearing as the building continues to settle.

	Container
For Max. Crack Wd.	Size, pt.	Type	Consistency	Begins to Harden, min.	Reaches Full Strength, hrs.	Approximate Coverage @ Thick.	Max. Thick.	Temp. Range, °F	Color	Finishing Method	For Use Outdoors	For Use On		Each
1/8"	1	Jar	Paste	5	2	20 ft. @ 8 mil	8 mil	50° to 120°	White	Sand	Yes	Drywall, Plaster, Concrete, Wood	000000	000000

Wood Surface Fillers

Fix damaged wood or build up and replace missing wood. These two-part fillers are nonshrinking and chemical resistant. At full strength, they can be sanded, painted, and varnished. The size listed is the combined total of the two parts.

Container
Size	Type	Consistency	Begins to Harden, hrs.	Reaches Full Strength, hrs.	Mixing Required	Mix Ratio	Approximate Coverage @ Thick.	Max. Thick.	Temp. Range, °F	Color	Finishing Method	For Use Outdoors	For Use On		Each
12 oz.	Jar	Putty	1	8	Yes	1:1	85 sq. in. @ 1/4"	3/4"	0° to 200°	Tan	Drill, Sand, Saw, Tap	Yes	Wood	000000	000000
2 pt.	Jar	Putty	1	8	Yes	1:1	230 sq. in. @ 1/4"	3/4"	0° to 200°	White	Drill, Sand, Saw, Tap	Yes	Wood	000000	00000

Thread Sealants for Oxygen Systems

Completely free of oil and chemically inert, these sealants are safe to use with wet and dry oxygen systems. They contain PTFE, which provides a slippery surface that keeps threads from binding. These sealants are non-hardening, remaining pliable enough to self-heal and stop leaks before they start, so they’re often used in high-vibration applications that could cause standard thread sealants to fail. Since they have low locking strength, these sealants can be adjusted without tools.

Container		Max. Pressure, psi
Size, oz.	Type	For Fluids	For Gases	Temp. Range, °F	Max. Temp. for Oxygen, °F	For Max. Thread Dia.	Consistency	Color		Each
Low Locking Strength
3.5	Jar	10,000	10,000	-450° to 550°	140°	6"	Paste	Green	000000	0000000

Additives and Fillers for Paints, Coatings, and Lubricants

When mixed into coatings, resins, polymers, and metals, these fillers enhance strength, conductivity, lubricity, and other physical properties.

			Container
Material	Concentration	Container Type	Size	Type	Material	Form	Particle Size	CAS Number		Each
Boron Nitride	99%	Jar	2 oz.	Jar	Plastic	Powder	0.07 microns	10043-11-5	0000000	0000000