Cover large sections of damaged concrete with these durable patching compounds. Made up of a resin, hardener, and aggregate, they cover more area than any of our other concrete patching compounds.

Use these two-part compounds to patch concrete floors, stairs, and walls in cold environments, such as freezers. At room temperature, they cure faster than any of our other concrete patching compounds.

Not only do these leveling compounds withstand severe abrasion, wear, and impact, they also stand up to steel wheels and heavy blows without cracking.

Fill cracks in horizontal, vertical, and overhead concrete surfaces.

Fill cracks up to 4" deep on horizontal surfaces, such as floors and sidewalks.

Stop active leaks of up to 50 gallons per minute in concrete, brick, and stone. These crack fillers begin to harden within seconds to create a permanent fix that won't shrink.

For use when thickness will be more than 2", concrete mixes consist of cement, sand, and gravel.

Slide these tools along the perimeter of poured concrete slabs to create a rounded edge for a finished appearance that resists chipping.

Also known as mortar hoes, the blade on these tools has holes to allow concrete to pass through as you mix.

Once concrete begins to set up and surface water reabsorbs, finish with a trowel to compact the top layer for a smooth, hard surface.

Push and pull freshly-poured concrete.

Create grooves in poured concrete slabs to control cracking caused by drying, settling, and freezing.

Designed for marine environments, these coatings stand up to harsh chemicals, such as sulfuric acid, citric acid, and diesel fuel. They have excellent abrasion, impact, and UV resistance, as well as low hardening temperatures.

Use these solvent-free, high-gloss coatings to protect concrete floors in enclosed areas. Durable enough for forklift traffic, they resist stains, moisture, and chemicals.

Seal freshly finished concrete to prevent it from drying too quickly during the curing process. These coatings also protect against mild chemicals, salts, soaps, and detergents.

Paint metal surfaces to stop rust from starting and prevent existing rust from spreading.

Cover scratches and wear on storage racks and carts. Match the color to your manufacturers' equipment color.

Unlike other marking paint, this paint sprays in the upright position and dries fast, so it won't drip when applied overhead.

This chalk disappears in approximately 15 days when exposed to water, traffic, or abrasion.

Eliminate paint splatter clean-up—drops dry to a powder as they fall from ceilings 10 feet and higher.

This paint is formulated for use in enclosed spaces.

Enhance, renew, and protect surfaces.

This paint leaves behind a stone-like texture. Use it to hide surface imperfections or to allow metal and wood fixtures to blend in with surrounding masonry and concrete.