For Use With For Use With | Show |
|---|
|
For Use With For Use With | Hide |
|---|
Housing Material Housing Material |
|---|
|
Fixed Displacement Rate Fixed Displacement Rate |
|---|
|
Maximum Pressure Maximum Pressure |
|---|
|
Voltage Voltage |
|---|
|
Rotor Material Rotor Material |
|---|
|
Duty Cycle Duty Cycle |
|---|
|
Electrical Phase Electrical Phase |
|---|
|
Frequency Frequency |
|---|
|
Gasket Material Gasket Material |
|---|
|
Overall Height Overall Height |
|---|
|
Overall Length Overall Length |
|---|
|
Power Source Power Source |
|---|
|
Seal Material Seal Material |
|---|
|
Volume Volume |
|---|
|
Rotary Feeders for Powder and Bulk Material
Transfer dry material from storage containers into air-powered conveyors and other pressurized systems. As the rotor’s eight vanes turn, the pockets between the vanes fill with material from the inlet and then dispense material through the outlet. Controlled by a built-in electric motor, this movement delivers bulk material in a controlled manner while maintaining pressure differential between the inlet and outlet. The rectangular flanges have standard bolt holes, so these feeders fit into most air-powered systems. Included neoprene gaskets are sized to fit the flanges to form a tight seal. To calculate the fixed displacement rate needed for your application, divide your material movement (lbs./hr.) by product density (lbs./cu. ft.).
These feeders are designed to operate in ambient temperatures up to 110° F. The 500° F maximum temperature is the point at which the neoprene gaskets will fail.
316 stainless steel feeders have excellent corrosion resistance, so they’re a good choice for handling abrasive or corrosive material.
For technical drawings and 3-D models, click on a part number.
Overall | Inlet | Outlet | Shaft | Keyway | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Fixed Displacement Rate, cu. in./rev. | Manufacturer Model No. | Lg. | Wd. | Ht. | Lg. | Wd. | Lg. | Wd. | Dia. | Lg. | Wd. | Dp. | Key Included | Max. Ambient Temp., °F | Max. Pressure, psi | Voltage | Each | |
Polyurethane-Coated Cast Iron | ||||||||||||||||||
| 207 | PAV6 | 27 1/4" | 21 1/16" | 16 3/4" | 6" | 6" | 6" | 6" | 1" | 2 1/2" | 0.25" | 0.125" | Yes | 110° | 12 | 230V/460V AC | 0000000 | 000000000 |
| 414 | PAV8 | 27 1/4" | 23 1/16" | 16 3/4" | 8" | 8" | 8" | 8" | 1 3/16" | 3" | 0.25" | 0.125" | Yes | 110° | 12 | 230V/460V AC | 0000000 | 00000000 |
| 732 | PAV10 | 27 1/4" | 25 3/4" | 16 3/4" | 10" | 10" | 10" | 10" | 1 7/16" | 3 1/2" | 0.375" | 0.188" | Yes | 110° | 12 | 230V/460V AC | 0000000 | 00000000 |
316 Stainless Steel | ||||||||||||||||||
| 207 | PAV6 | 27 1/4" | 21 1/16" | 16 3/4" | 6" | 6" | 6" | 6" | 1" | 2 1/2" | 0.25" | 0.125" | Yes | 110° | 12 | 230V/460V AC | 0000000 | 00000000 |
| 414 | PAV8 | 27 1/4" | 23 1/16" | 16 3/4" | 8" | 8" | 8" | 8" | 1 3/16" | 3" | 0.25" | 0.125" | Yes | 110° | 12 | 230V/460V AC | 0000000 | 00000000 |
| 732 | PAV10 | 27 1/4" | 25 3/4" | 16 3/4" | 10" | 10" | 10" | 10" | 1 7/16" | 3 1/2" | 0.375" | 0.188" | Yes | 110° | 12 | 230V/460V AC | 0000000 | 00000000 |
