Measure the flow rate of water in your system.

Instead of a scale, these flowmeters have a prominent dial that’s easy to see from a distance. Dial displays readings in gallons.

Measure the flow rate of water in both gallons and liters.

For easier reading from a distance, these flowmeters have a prominent dial instead of a scale. They can withstand pressures up to 3,000 psi.

The transparent body lets you inspect water color and clarity in addition to measuring the flow rate.

The PVC body can withstand corrosive chlorinated and deionized water.

Fittings on the back let you install these flowmeters in instrument panels.

A rugged, impact-resistant case protects these flowmeters from damage.

Install these flowmeters without disassembling your pipeline. Drill a hole in an existing run of PVC pipe and secure the flowmeter with the included clamps.

For protection against damage, these flowmeters have a rugged, impact-resistant case.

Measure the flow rate of compressed air.

Rated for at least six times the pressure of standard flowmeters for air, these can withstand pressures of at least 600 psi.

Designed for more than 10 times the pressure of standard flowmeters for oil, these are rated for pressures up to 3,500 psi.

With double the temperature rating of standard flowmeters for oil, these can be used with oil up to 400° F.

Directly install these flowmeters in your pipeline. They can be used with water containing particles up to 1/8” in diameter.

Measure the total flow volume of water in your system.

Three times more accurate than standard totalizers for water, these are rated for ±1.5% accuracy.

These totalizers meet NSF/ANSI Standard 61 for use in drinking water systems.

With a display that can be mounted up to 1,000 feet from the body, these totalizers are often installed in hard-to-access areas and remote locations.

More than twice as accurate as standard totalizers for fuel, these are rated for ±2% accuracy.

Designed for use with light oils.

Determine the flow rate and total flow volume of water with the same meter.

Bond the unthreaded connections to PVC pipe with PVC cement and primer.

For secure connections in large pipelines with high flow rates, these flowmeter/totalizers have flanged ends.

The indicator moves when flow is present, so it’s easy to visually confirm flow from a distance.

For visual confirmation of flow from a distance, these sights have a ball indicator that moves when flow is present.

A ball indicator increases the visibility of flow for checking at a distance.

Withstand twice the temperature of standard sights. These are rated for temperatures up to 400° F.

To maintain a clear view of your process media without disrupting flow, twist the tubular window to clear debris and buildup with the internal wipers.

The included mounting ring lets you install these sights in instrument panels.

About half the height of other flow sights for chemicals, these fit in areas with limited clearance.

These switches have a low-profile design to fit in water pipelines with limited clearance.

Designed for applications with consistent flow, these switches have a fixed set point.

These switches have a fixed set point for applications with consistent flow.

For flow monitoring at a glance, these switches have a plastic window with a rotor that spins when flow is present.

For installation in environments with flammable gases and combustible dust, these flow switches are UL listed for use in hazardous locations.

Flowmeters let you see the gas flow rate from a distance.

These valves automatically reduce a high inlet pressure from compressed gas tanks to a lower, stable outlet pressure.

Designed for nitrogen gas purging in air conditioning, refrigeration, and plumbing systems.

Install these valves directly in gas distribution pipelines.