About Tapping Screws
More
Phillips Screws for Softwood and Plastic-Wood Composites
A curved neck sinks into material, so these screws sit flush with the surface. Also known as deck screws, they have a sharp point and narrow body to penetrate softwood and plastic-wood composite decking material. They're made from hardened steel and have a corrosion-resistant coating that resists at least 500 hours of salt spray. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Ht. | Drive Size | Drill Bit Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
Corrosion-Resistant-Coated Steel | ||||||||||
No. 6  | ||||||||||
| 1" | 0.328" | 3/16" | No. 2 | 5/64" | 9 | Partially Threaded | 3/4" | 300 | 000000000 | 00000 |
| 1 1/4" | 0.347" | 7/32" | No. 2 | 1/16" | 18 | Fully Threaded | __ | 245 | 000000000 | 0000 |
| 1 5/8" | 0.347" | 7/32" | No. 2 | 1/16" | 18 | Fully Threaded | __ | 200 | 000000000 | 0000 |
No. 7 | ||||||||||
| 2" | 0.323" | 7/32" | No. 2 | 1/16" | 18 | Partially Threaded | 1.32" | 160 | 000000000 | 0000 |
| 2 1/2" | 0.319" | 7/32" | No. 2 | 5/64" | 9 | Partially Threaded | 2" | 35 | 000000000 | 0000 |
No. 8 | ||||||||||
| 2 1/2" | 0.363" | 7/32" | No. 2 | 5/64" | 15 | Partially Threaded | 1.65" | 90 | 000000000 | 0000 |
| 3" | 0.363" | 7/32" | No. 2 | 5/64" | 15 | Partially Threaded | 1.98" | 80 | 000000000 | 0000 |
No. 10 | ||||||||||
| 3 1/2" | 0.363" | 7/32" | No. 2 | 3/32" | 13 | Partially Threaded | 2.31" | 50 | 000000000 | 0000 |
| 4" | 0.363" | 7/32" | No. 2 | 3/32" | 13 | Partially Threaded | 2.64" | 50 | 000000000 | 0000 |
| 5" | 0.342" | 3/16" | No. 2 | 5/64" | 9 | Partially Threaded | 1.65" | 35 | 000000000 | 00000 |
| 6" | 0.342" | 3/16" | No. 2 | 5/64" | 9 | Partially Threaded | 1.65" | 30 | 000000000 | 00000 |