Filter by
Drive Style
Fastener Head Type
Screw Size
Rounded Head Style
DFARS Compliance
Rounded Head Profile
About Tapping Screws
More
Steel Rounded Head Screws for Plywood and Oriented Strand Board
These screws are zinc plated to resist corrosion in wet environments. They penetrate plywood and oriented strand board (OSB) without splitting. Threads are serrated for lower driving torque. Length is measured from under the head.
For technical drawings and 3-D models, click on a part number.
Head | Drive | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Ht. | Size | Style | Drill Bit Size | Approximate Threads per Inch | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||
No. 6  | |||||||||
| 1/2" | 0.26" | 0.1" | No. 1/No. 2 | Square/Phillips | 1/16" | 18 | 50 | 000000000 | 00000 |
| 5/8" | 0.26" | 0.1" | No. 1/No. 2 | Square/Phillips | 1/16" | 18 | 50 | 000000000 | 0000 |
| 3/4" | 0.26" | 0.1" | No. 1/No. 2 | Square/Phillips | 1/16" | 18 | 100 | 000000000 | 0000 |
No. 8 | |||||||||
| 3/4" | 0.33" | 0.11" | No. 2/No. 2 | Square/Phillips | 5/64" | 15 | 35 | 000000000 | 0000 |
| 1" | 0.33" | 0.11" | No. 2/No. 2 | Square/Phillips | 5/64" | 15 | 30 | 000000000 | 0000 |
| 1 1/4" | 0.33" | 0.11" | No. 2/No. 2 | Square/Phillips | 5/64" | 15 | 30 | 000000000 | 0000 |
| 1 1/2" | 0.33" | 0.11" | No. 2/No. 2 | Square/Phillips | 5/64" | 15 | 25 | 000000000 | 0000 |
| 2" | 0.33" | 0.11" | No. 2/No. 2 | Square/Phillips | 5/64" | 15 | 140 | 000000000 | 00000 |
No. 10 | |||||||||
| 5/8" | 0.37" | 0.13" | No. 2/No. 2 | Square/Phillips | 3/32" | 13 | 25 | 000000000 | 0000 |
| 3/4" | 0.37" | 0.13" | No. 2/No. 2 | Square/Phillips | 3/32" | 13 | 20 | 000000000 | 0000 |
| 1" | 0.37" | 0.13" | No. 2/No. 2 | Square/Phillips | 3/32" | 13 | 20 | 000000000 | 0000 |