Fuel Transfer Drum Pumps

Filter by

For Use With

Methanol (Methyl Alcohol)

Voltage

Power Source

Container Size

Flow Rate

Nozzle Type

Housing Material

Discharge Pipe Size

Intake Tube Material

Discharge Location

Wetted Parts Material

Drum Pump Type

Discharge Connection Port

Intake Tube Length

Intake Pipe Size

Intake Tube OD

Intake Connection Port

Certification

REACH

RoHS

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

Frequency

Maximum Temperature

Discharge Hose Length

Intake Tube Adjustability

64 Products

About Drum Pumps

For on-site diesel fuel dispensing at construction sites, on boats, and in other environments without electrical hookups, attach these portable pumps to any 12-volt battery.

			Temp. Range, °F						Intake		Discharge
Flow Rate, gpm	Discharge Pressure, psi	Max. Viscosity, cP	Min.	Max.	Horsepower	Current, A	Max. Lift, ft.	Includes	Hose Connection Type	For Hose ID	Hose Connection Type	For Hose ID	Features		Each
12V DC, Single Phase
13	21	5.3	25°	100°	Not Rated	18	6	6 1/2-ft. Battery Cable with Clamps	Barbed	3/4"	Barbed	3/4"	Bypass Relief Valve	00000000	0000000

Portable Battery-Operated Drum Pumps with Nozzle for Diesel Fuel

A nozzle and hose allow you to dispense directly into your container. For on-site diesel fuel dispensing at construction sites, on boats, and in other environments without electrical hookups, attach these portable pumps to any 12-volt battery.

			Temp. Range, °F						Intake		Discharge (Hose and Nozzle)
Flow Rate, gpm	Discharge Pressure, psi	Max. Viscosity, cP	Min.	Max.	Horsepower	Current, A	Max. Lift, ft.	Includes	Hose Connection Type	For Hose ID	ID	Lg., ft.	Features		Each
12V DC, Single Phase
13	14	5.3	25°	100°	Not Rated	22	6	6 1/2-ft. Battery Cable with Clamps	Barbed	3/4"	3/4"	13	Bypass Relief Valve	00000000	0000000

Battery-Operated Drum Pumps with Nozzle for Fuel

Pump

Pump with Metering Nozzle

Operating on a 12-volt battery, these pumps transfer and drain fuel such as gasoline, diesel fuel, and kerosene. Lock the nozzle with a padlock (not included).

Always bond and ground your application for static control. For more information about bonding and grounding, see Sections 1910.106 and 1910.107 of the Federal OSHA Code or see bonding and grounding equipment.

Pumps with metering nozzle record total volume up to 99,999.9 gallons.

			Temp. Range, °F							Intake		Discharge (Hose and Nozzle)
Flow Rate, gpm	Discharge Pressure, psi	Max. Viscosity, cP	Min.	Max.	Horsepower	Current, A	Max. Lift, ft.	For Drum Opening Size	Includes	Tube OD	Tube Lg.	ID	Lg., ft.	Nozzle Type		Each
12V DC, Single Phase—With Thermal Overload Protection
15	12	30	-15°	150°	1/4 hp	20	8	2 NPT	18-ft. Battery Cable, Drum Connector	1"	20"-34 3/4"	3/4"	12	Manual Shut-Off, Lockable	0000000	0000000
15	12	30	-15°	150°	1/4 hp	20	8	2 NPT	18-ft. Battery Cable, Drum Connector	1"	20"-34 3/4"	3/4"	12	Metering, Manual Shut-Off	0000000	000000

Hazardous Location High-Flow Battery-Operated
Drum Pumps with Nozzle for Fuel

These pumps are C-UL listed for Class I, Division 2, Group D for use in environments with flammable gases. Operating on a 12-volt battery, use them to transfer and drain fuel such as gasoline, diesel fuel, and kerosene. They have an automatic shut-off nozzle so they turn off when the tank is full. Lock the nozzle with a padlock (not included).

			Temp. Range, °F							Intake			Discharge (Hose and Nozzle)
Flow Rate, gpm	Discharge Pressure, psi	Max. Viscosity, cP	Min.	Max.	Horsepower	Current, A	Max. Lift, ft.	For Drum Opening Size	Includes	Pipe Size	Gender	Thread Type	ID	Lg., ft.	Nozzle Type	Max. Shackle Dia.	Thermal Protection		Each
12V DC
25	20	10	-20°	125°	4/10 hp	35	15	2 NPT	18-ft. Battery Cable, Drum Connector	1	Female	NPT	1"	18	Automatic Shut-Off, Lockable	5/16"	With Thermal Overload Protection	0000000	000000000

Drum Pumps for Fuel and Flammable Liquid

All of these pumps have bonding and grounding wires, while some also have an internal flame arrester, to pump fuel, cleaning solvents, and lacquer thinners.

Steel pumps work with fuels and flammable liquids, but not especially aggressive and corrosive chemicals.

Stainless steel pumps handle aggressive and corrosive liquids that steel pumps cannot.

Pumps for 5-gallon containers have a drum connector that fits Rieke flex spouts and two screw cap adapters: 1 3/4" and 2 1/8".

Repair kits include components such as extension tubes, gaskets, and pistons.

						Intake
Flow Rate, oz./stroke	For Container Size, gal.	Max. Viscosity, cP	Max. Temp.	For Drum Opening Size	Includes	Tube OD	Tube Lg.	Features		Each
Steel
4	5	110	Not Rated	1 3/4", 2 1/4", 2 1/8", 2 7/8"	Drum Connector, Flex Spout Adapter, Two Screw Cap Adapters (1 3/4" & 2 1/8")	1/2"	16"	Bonding and Grounding Wires, Internal Flame Arrester	0000000	0000000
8	55	110	Not Rated	2 NPT	Drum Connector	1/2"	22"	Bonding and Grounding Wires, Internal Flame Arrester	0000000	000000
316 Stainless Steel
10	5-7	650	140° F	2 5/8", 2"	Drum Connector	1 1/2"	18"	Bonding and Grounding Wires	0000000	000000
20	30-55	650	140° F	2"	Drum Connector	1 1/2"	37 1/2"	Bonding and Grounding Wires	0000000	000000

Repair Kit for Steel Pumps with 110 cP Max. Viscosity

0000000

Each

0000000

Smooth-Flow Drum Pumps for Fuel

Rotate the handle to dispense a continuous flow of liquid. These pumps are rated for use with Class I and II flammable and combustible fuels.

Pumps with removable spout allow you to replace the spout with a 1" ID discharge tube for transfer applications.

With Hose and Nozzle

			Temp. Range, °F				Intake		Discharge (Hose and Nozzle)
Flow Rate, oz./stroke	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	For Drum Opening Size	Includes	Tube OD	Tube Lg.	Hose OD	Hose Lg., ft.	Features		Each
12.8	15-55	319	-15°	150°	2 NPT	Drum Connector	1"	20"-35"	5/8"	8	Bonding and Grounding Wires, Nozzle Hanger, Strainer, Vacuum Breaker	0000000	0000000

Replacement Tube	Each	000000
Repair Kit	Each	00000
Replacement Hose	Each	00000
Replacement Nozzle	Each	00000

With Removable Spout

With Removable Spout

			Temp. Range, °F				Intake		Discharge (Spout End)
Flow Rate, oz./stroke	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	For Drum Opening Size	Includes	Tube OD	Tube Lg.	Pipe Size	Thread Type	Gender	Features		Each
11	55	420	Not Rated	300°	2 NPT	Drum Connector	3/4"	22"-40"	3/4	NPT	Male	Drip Pan, Internal Flame Arrester, Strainer	0000000	0000000

Optional 3/4 NPT × 2 NPT Drum Connector	000000	Each	0000000
Replacement Tube	000000	Each	000000
Replacement O-Ring Kit	0000000	Each	00000

With Removable Spout and Hose and Nozzle

With Removable Spout and Hose and Nozzle

			Temp. Range, °F				Intake		Discharge (Hose and Nozzle)
Flow Rate, oz./stroke	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	For Drum Opening Size	Includes	Tube OD	Tube Lg.	Hose OD	Hose Lg., ft.	Features		Each
11	55	420	Not Rated	300°	2 NPT	Drum Connector	3/4"	22"-40"	3/4"	8	Internal Flame Arrester, Nozzle Hanger, Strainer, Vacuum Breaker	0000000	0000000

Replacement Hose	000000	Each	0000000
Replacement O-Ring Kit	0000000	Each	00000
Replacement Nozzle Holder	000000	Each	00000
Optional 3/4 NPT × 2 NPT Drum Connector	000000	Each	000000
Replacement Tube	000000	Each	000000

Adjustable-Flow Electric Drum Pumps for Water, Oil, Coolants, and Chemicals

Alter the flow rate for versatile dispensing. These pumps do not include a drum connector.

Tube End Discharge

				Temp. Range, °F						Intake		Discharge
	Flow Rate, gpm	Discharge Pressure, psi	For Container Size, gal.	Min.	Max.	Horsepower	Current, A	For Drum Opening Size	Includes	Tube OD	Tube Lg.	Tube ID	Tube OD	Tube Lg.	Electrical Connection Type		Each
120V AC, Single Phase—With Thermal Overload Protection
A	0-18.5	9	30	15°	120°	1/4 hp	1.5	32 mm	Wall Bracket	1 1/4"	27"	3/4"	1"	60"	Plug	00000000	0000000
A	0-18.5	9	55	15°	120°	1/4 hp	1.5	32 mm	Wall Bracket	1 1/4"	39"	3/4"	1"	60"	Plug	00000000	000000

Repair Parts

For Drum Pump Style	Component		Each
A	18.5 gpm Flow Rate Diffuser	00000000	000000
A	16 mm Dia. Ball Bearing	00000000	00000
A	16 mm Dia. Shim Ring	00000000	0000
A	10 mm Lg. Coupling Cross	00000000	00000
A	49 mm Lg. Pump Foot	00000000	00000
A	Bearing Housing	00000000	00000
A	Guide Bushing for Drum Pumps for 30 Gal. Container Size	00000000	00000
A	Guide Bushing for Drum Pumps for 55 Gal. Container Size	00000000	00000
A	O-Ring	00000000	0000
A	Repair Kit for Drum Pumps for 30 Gal. Container Size	00000000	000000
A	Repair Kit for Drum Pumps for 55 Gal. Container Size	00000000	000000
A	Rotor	00000000	00000
A	Shaft Seal	00000000	00000

Hazardous Location Electric Drum Pumps
for Water, Oil, Coolants, and Chemicals

These pumps quickly empty drum contents by moving 48 gallons of liquid per minute. They are often used with lubricating oil as well as with chemicals such as detergents and etching and cleaning solutions. Their electric motors are explosion proof and UL listed for Class I, Divisions 1 and 2, Groups C and D; and Class II, Division 2, Groups F and G environments where flammable gases and combustible dust may be present.

Drum Pumps

				Temp. Range, °F					Intake		Discharge
Flow Rate, gpm	Discharge Pressure, psi	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Horsepower	Current, A	For Drum Opening Size	Tube OD	Tube Lg.	Tube Connection Type	For Tube ID	Thermal Protection		Each
120V AC, Single Phase
Hardwire
48.5	14	55	300	-40°	210°	1/2 hp	5.3	41 mm	1 5/8"	39"	Barbed	1"	With Thermal Overload Protection	00000000	000000000

Maintenance Parts

Component		Each
Snap Ring	00000000	00000
M-Tool	00000000	0000
Seal	00000000	0000
Guide Bushing	00000000	00000
Rotor	00000000	000000
Star Bearing	00000000	000000
Flange Bearing Unit	00000000	000000
Repair Kit	00000000	000000

Electric Drum Pump Systems for Water, Oil, Coolants, and Chemicals

Including nozzles and connectors, these pumps come with everything you need to start pumping. All include a pump assembly, 1" ID hose, dispensing nozzle, drum connector, and storage bracket.

Pumps with a 316 stainless steel housing are often used with fuel, acetone, methyl ethyl ketone (MEK), xylene, and mineral spirits. Their motors are rated IP55 and are CSA certified for use in Class I, Divisions 1 and 2, Group D hazardous environments with flammable gases and vapors.

For technical drawings and 3-D models, click on a part number.

				Temp. Range, °F					Intake		Discharge
Flow Rate, gpm	Discharge Pressure, psi	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Horsepower	Current, A	For Drum Opening Size	Tube OD	Tube Lg.	Tube ID	Tube OD	Tube Lg.	Environmental Rating		Each
120V AC, Single Phase—Hardwire
316 Stainless Steel Housing
18	15	55	1,000	Not Rated	175°	1 1/3 hp	9.1	2 NPT	1 1/2"	39"	1"	1 1/4"	72"	NEC Class I Divisions 1, 2 Group D IP55	0000000	000000000

Electric Drum Pumps with Nozzle for Fuel

Pump fuel in hazardous environments with flammable gases. Pumps are UL listed for Class I, Divisions 1 and 2, Group D.

Style A pumps have a circuit breaker to prevent overload. Pumps with automatic shut-off nozzle turn off when the tank is full.

Style B pumps have a metering nozzle that registers total volume up to 99,999.9 gallons. Lock with a padlock (not included). A bypass valve prevents pressure buildup when the nozzle is closed.

Anti-siphon kit prevents reverse flow with a vacuum breaker and includes all hose, fittings, and seals required for installation. Pedestal kit converts your pump from a drum mount to a pedestal mount.

Style A

			Temp. Range, °F						Intake		Discharge
Flow Rate, gpm	Discharge Pressure, psi	Max. Viscosity, cP	Min.	Max.	Horsepower	Current, A	Max. Lift, ft.	For Drum Opening Size	Tube OD	Tube Lg.	Hose ID	Hose Lg., ft.	Hose OD	Nozzle Type	Electrical Connection Type		Each
120V AC, Single Phase—With Thermal Overload Protection
12	15	10	-20°	125	1/8 hp	1.5	4.8	2 NPT	1 7/16"	22"-40"	3/4"	12	1 5/32"	Automatic Shut-Off	Hardwire	0000000	0000000
12	15	10	-20°	125	1/8 hp	1.5	5.5	2 NPT	1 7/16"	22"-40"	3/4"	12	1 5/32"	Manual Shut-Off	Hardwire	0000000	000000

Style B

			Temp. Range, °F						Intake			Discharge
Flow Rate, gpm	Discharge Pressure, psi	Max. Viscosity, cP	Min.	Max.	Horsepower	Current, A	Max.Lift, ft.	For Drum Opening Size	Gender	Pipe Size	Thread Type	Hose ID	Hose Lg., ft.	Hose OD	Nozzle Type	Max. Shackle Dia.	Electrical Connection Type		Each
120V AC, Single Phase—With Thermal Overload Protection
20	22	10	-40°	150	1/3 hp	5.5	10	2 NPT	Female	1 1/4	NPT	3/4"	12	1 1/8"	Lockable, Manual Shut-Off, Metering	3/8"	Hardwire	0000000	000000000

Pedestal Kit	0000000	Each	0000000
Anti-Siphon Kit	0000000	Each	000000

Foot-Operated Drum Pumps for Water and Oil

The foot pedal allows hands-free operation. These pumps have a telescoping intake tube that works with containers of different heights.

			Temp. Range, °F				Intake
Flow Rate, gpm	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	For Drum Opening Size	Includes	Tube OD	Tube Lg.		Each
6	55	500	35°	100°	1 1/8"-2 3/4"	Drum Connector	1/2"	19"-35"	0000000	0000000

High-Pressure Air-Powered Drum Pumps for Fuel and Flammable Liquid

Use these pumps with fuel and flammable liquids, such as acetone, ethanol, and gasoline. They handle nearly twice the amount of pressure as other air-powered drum pumps to move high-viscosity liquids. Install an air line filter/lubricator to ensure efficiency and reduce wear on the pump.

			Temp. Range, °F						Air Connection			Intake		Discharge
Flow Rate, gpm	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Air Pressure Range, psi	Air Consumption, cfm	For Drum Opening Size	Includes	Pipe Size	Gender	Thread Type	Tube OD	Tube Lg.	Pipe Size	Gender	Thread Type		Each
4	55	7,500	40°	200°	0-150	10	2 NPT	Drum Connector	1/4	Female	NPT	2 1/8"	33 11/16"	3/4	Female	NPT	0000000	000000000

PVDF Extended-Life Air-Powered Drum Pumps for Chemicals

A chemical- and impact-resistant PVDF housing stands up to aggressive chemicals such as methyl ethyl ketone (MEK) and xylene. Also known as diaphragm pumps, they have few moving parts that can fail for a long service life. Install an air line filter/lubricator to ensure efficiency and reduce wear on the pump.

Repair kits include O-rings, valves, and diaphragms.

			Temp. Range, °F					Air Connection			Intake				Discharge
Flow Rate, gpm	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Air Pressure, psi	Air Consumption, cfm	For Drum Opening Size	Pipe Size	Gender	Thread Type	Pipe Size	Gender	Thread Type	Tube Lg.	Pipe Size	Gender	Thread Type		Each
13	55	3,000	40°	210°	100	12	2 NPT	1/4	Female	NPT	1/2	Female	NPT	36"	1/2	Female	NPT	0000000	000000000

Repair Kit

00000000

Each

0000000

Aluminum Extended-Life Air-Powered Drum Pumps for Fuel

Pump fuel such as gasoline, kerosene, and diesel fuel. Also known as diaphragm pumps, these pumps have few moving parts that can fail for a long service life. Install an air line filter/lubricator to ensure efficiency and reduce wear on the pump.

Repair kits include balls, O-rings, and diaphragms.

			Temp. Range, °F					Air Connection			Intake				Discharge
Flow Rate, gpm	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Air Pressure, psi	Air Consumption, cfm	For Drum Opening Size	Pipe Size	Gender	Thread Type	Pipe Size	Gender	Thread Type	Tube Lg.	Pipe Size	Gender	Thread Type		Each
28	55	8,000	40°	210°	100	40	2 NPT	1/4	Female	NPT	3/4	Female	NPT	39"	3/4	Female	NPT	0000000	000000000

Repair Kit

00000000

Each

0000000

Air-Powered Drum Pumps for Flammable Liquid

These pumps have a motor that is rated for IEC Zone 1, Groups IIB and IIA; and IEC Zone 21, Groups IIIC, IIIB, and IIIA hazardous locations with flammable gases and vapors, so they can be used with liquids such as acetone, ethanol, methyl ethyl ketone (MEK), xylene, and mineral spirits. Motor is nonsparking for use in applications where electricity is unavailable or dangerous. Install an air line filter/lubricator to ensure efficiency and reduce wear on the pump.

For technical drawings and 3-D models, click on a part number.

			Temp. Range, °F						Air Connection			Intake		Discharge
Flow Rate, gpm	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Air Pressure Range, psi	Air Consumption, cfm	For Drum Opening Size	Includes	Pipe Size	Gender	Thread Type	Tube OD	Tube Lg.	Tube Connection Type	For Tube ID		Each
26	55	1,100	-40°	210°	44-87	53	2 NPT	Drum Connector	3/8	Female	NPT	1 5/8"	39"	Barbed	1"	0000000	000000000
26	55	1,100	-40°	210°	44-87	53	2 NPT	Drum Connector	3/8	Female	NPT	1 5/8"	47"	Barbed	1"	0000000	00000000
53	55	1,000	-40°	210°	44-87	53	2 NPT	Drum Connector	3/8	Female	NPT	1 5/8"	39"	Barbed	1"	0000000	00000000
53	55	1,000	-40°	210°	44-87	53	2 NPT	Drum Connector	3/8	Female	NPT	1 5/8"	47"	Barbed	1"	0000000	00000000

Replacement Hand Wheel	0000000	Each	000000
Replacement Coupling Kit	0000000	Each	00000