Component Component |
|---|
|
Capacity Capacity |
|---|
|
Maximum Height Differential Maximum Height Differential |
|---|
|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Lip Color Lip Color |
|---|
 | Blue |
 | Fluorescent Yellow |
About Dock Levelers and Dock Plates
More
Planks, Guardrails, and Toeboards
Create catwalks, bridges, gangways, and mezzanines by combining these planks, guardrails, and toeboards. They also work well between trestles, ladder jacks, and ladder scaffolding supports. Rungs on the underside are for use as hand grips.
Planks have a slip-resistant surface for sure footing. The vinyl end caps protect against sharp edges and act as hand grips.
Guardrails mount to either side of the plank with the upper rails 38" to 42" above the plank surface.
Toeboards mount to either side of the plank. They clamp to guardrail posts.
Note: Planks, guardrails, and toeboards meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.
For technical drawings and 3-D models, click on a part number.
| Lg., ft. | Ht. | Wt., lbs. | Material | Plank Tread | Mounting Hardware Included | Assembled or Unassembled | Specifications Met | Each | |
500-lb. Capacity | |||||||||
|---|---|---|---|---|---|---|---|---|---|
14" Wd. | |||||||||
| 8 | 4" | 27 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 0000000 |
| 12 | 4" | 40 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 16 | 5" | 58 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 20 | 6" | 85 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 24 | 6" | 109 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
20" Wd. | |||||||||
| 8 | 4" | 33 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 12 | 4" | 48 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 16 | 5" | 70 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 20 | 6" | 102 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 24 | 6" | 121 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
24" Wd. | |||||||||
| 8 | 4" | 38 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 12 | 4" | 56 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 16 | 5" | 81 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 20 | 6" | 115 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 24 | 6" | 138 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
28" Wd. | |||||||||
| 8 | 4" | 41 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 12 | 4" | 60 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 16 | 5" | 87 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 20 | 6" | 124 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 24 | 6" | 147 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 00000000 |
750-lb. Capacity | |||||||||
28" Wd. | |||||||||
| 12 | 4" | 71 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 16 | 5" | 103 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 20 | 5" | 128 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 00000000 |
| 24 | 6" | 161 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 00000000 |
| For Plank Lg., ft. | Material | Mounting Hardware Included | Assembled or Unassembled | Includes | Specifications Met | Each | |
| 8 | Aluminum | Yes | Unassembled | Midrail, Vertical Posts | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 0000000 |
| 12 | Aluminum | Yes | Unassembled | Midrail, Vertical Posts | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 000000 |
| 16 | Aluminum | Yes | Unassembled | Midrail, Vertical Posts | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 000000 |
| 20 | Aluminum | Yes | Unassembled | Midrail, Vertical Posts | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 000000 |
| 24 | Aluminum | Yes | Unassembled | Midrail, Vertical Posts | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 000000 |
| For Plank Lg., ft. | Toeboard Ht. | Material | Mounting Hardware Included | Assembled or Unassembled | Specifications Met | Each | |
| 8 | 3 1/2" | Aluminum | No | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 000000 |
| 12 | 3 1/2" | Aluminum | No | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 00000 |
| 16 | 3 1/2" | Aluminum | No | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 00000 |
| 20 | 3 1/2" | Aluminum | No | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 000000 |
| 24 | 3 1/2" | Aluminum | No | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 000000 |
Walk Ramps
Create a walkway to maneuver hand trucks on and off vehicles and trailers. These ramps have chains to secure them to a truck, and a long apron provides a smooth transition from ramp to truck bed. Ramps have a ridged, antislip surface and welded lips on the sides to prevent runoff.
Note: Not for use with pallet trucks and forklifts.
| Max. Ht. Differential | Capacity, lbs. | Lg., ft. | Wd. | Overall Wd. | Material | Lip Material | Apron Lg. | Each | |
| ±25" | 1,800 | 7 | 26" | 28" | Aluminum | Aluminum | 9" | 0000000 | 0000000 |
| ±29" | 1,600 | 8 | 38" | 40" | Aluminum | Aluminum | 9" | 0000000 | 00000000 |
| ±38" | 1,500 | 10 | 38" | 40" | Aluminum | Aluminum | 9" | 0000000 | 00000000 |
| ±46" | 1,400 | 12 | 38" | 40" | Aluminum | Aluminum | 9" | 0000000 | 00000000 |
| ±62" | 1,000 | 16 | 38" | 40" | Aluminum | Aluminum | 9" | 0000000 | 00000000 |
Low-Height Walk Ramps
Use these ramps to create a walkway for moving hand trucks over curbs and thresholds between 3" and 5" high. The plate surface has a tread pattern for good traction. The carrying handles allow for easy positioning.
Lightweight Portable Dock Plates
Lighter than steel, these aluminum dock plates have two handles for quick manual positioning to bridge the gap between a truck and the dock. Use them when loading and unloading with hand trucks, pallet trucks, and other walk-on/walk-off equipment. Plates have a tread surface to provide positive traction.
| Max. Ht. Differential | Capacity, lbs. | Lg. | Overall Wd. | Material | Features | Each | |
3/8" Plate Thick. | |||||||
|---|---|---|---|---|---|---|---|
| ±3" | 5,200 | 24" | 48" | Aluminum | Two Carrying Handles | 0000000 | 0000000 |
| ±3" | 7,200 | 24" | 72" | Aluminum | Fluorescent Yellow Edges, Two Carrying Handles | 0000000 | 000000 |
| ±4" | 3,000 | 30" | 36" | Aluminum | Two Carrying Handles | 0000000 | 000000 |
| ±4" | 3,300 | 30" | 42" | Aluminum | Two Carrying Handles | 0000000 | 000000 |
| ±4" | 4,100 | 30" | 48" | Aluminum | Two Carrying Handles | 0000000 | 000000 |
| ±5" | 2,500 | 36" | 36" | Aluminum | Fluorescent Yellow Edges, Two Carrying Handles | 0000000 | 000000 |
| ±5" | 3,500 | 36" | 48" | Aluminum | Two Carrying Handles | 0000000 | 000000 |
| ±5" | 4,100 | 36" | 60" | Aluminum | Two Carrying Handles | 0000000 | 000000 |
| ±7" | 1,900 | 48" | 36" | Aluminum | Two Carrying Handles | 0000000 | 000000 |
| ±7" | 2,600 | 48" | 48" | Aluminum | Two Carrying Handles | 0000000 | 000000 |
| ±7" | 2,900 | 48" | 60" | Aluminum | Two Carrying Handles | 0000000 | 000000 |
| ±9" | 1,800 | 60" | 48" | Aluminum | Two Carrying Handles | 0000000 | 000000 |
1/2" Plate Thick. | |||||||
| ±3" | 10,000 | 24" | 60" | Aluminum | Two Carrying Handles | 0000000 | 000000 |
| ±4" | 7,800 | 30" | 60" | Aluminum | Two Carrying Handles | 0000000 | 000000 |
| ±4" | 9,500 | 30" | 72" | Aluminum | Two Carrying Handles | 0000000 | 000000 |
| ±5" | 5,300 | 36" | 48" | Aluminum | Two Carrying Handles | 0000000 | 000000 |
| ±5" | 6,600 | 36" | 60" | Aluminum | Two Carrying Handles | 0000000 | 000000 |
| ±5" | 7,800 | 36" | 72" | Aluminum | Two Carrying Handles | 0000000 | 00000000 |
| ±7" | 3,800 | 48" | 48" | Aluminum | Two Carrying Handles | 0000000 | 000000 |
Portable Dock Plates
These plates allow forklift access so you can move them easily to bridge the gap between a truck and the dock. Use them when loading and unloading with forklifts, battery-operated hand trucks, and other powered equipment. Plates have a tread surface for positive traction and lips on the sides lessen the chance of vehicle runoff.
Lip | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Max. Ht. Differential | Capacity, lbs. | Lg. | Overall Wd. | Material | Material | Color | Features | Each | |
| ±5" | 15,000 | 36" | 60" | Aluminum | Painted Steel | Fluorescent Yellow | Anchoring Legs | 00000000 | 0000000 |
| ±5" | 20,000 | 36" | 60" | Aluminum | Painted Steel | Fluorescent Yellow | Anchoring Legs | 00000000 | 000000 |
| ±7" | 10,000 | 48" | 60" | Aluminum | Painted Steel | Fluorescent Yellow | Anchoring Legs | 00000000 | 000000 |
| ±7" | 15,000 | 48" | 60" | Aluminum | Painted Steel | Fluorescent Yellow | Anchoring Legs | 00000000 | 00000000 |
| ±10" | 10,000 | 60" | 60" | Aluminum | Painted Steel | Fluorescent Yellow | Anchoring Legs | 00000000 | 00000000 |
| ±10" | 15,000 | 60" | 60" | Aluminum | Painted Steel | Fluorescent Yellow | Anchoring Legs | 00000000 | 00000000 |
| ±12" | 10,000 | 72" | 60" | Aluminum | Painted Steel | Fluorescent Yellow | Anchoring Legs | 00000000 | 00000000 |
| ±12" | 15,000 | 72" | 60" | Aluminum | Painted Steel | Fluorescent Yellow | Anchoring Legs | 00000000 | 00000000 |
Portable Dock Plates with Wheels
Telescoping handles with wheels let one person lift and position these plates without using a forklift. Use them to bridge the gap between a truck and the dock when loading and unloading with forklifts, battery-operated hand trucks, and other powered equipment. Plates have a tread surface for positive traction and lips on the sides lessen the chance of vehicle runoff. You can retract the telescoping handles when the plate is in position.
Lip | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Max. Ht. Differential | Capacity, lbs. | Lg. | Overall Wd. | Material | Material | Color | Features | Each | |
| ±5" | 10,000 | 48" | 60" | Aluminum | Painted Steel | Blue | Anchoring Legs, Telescoping Handles | 0000000 | 000000000 |
| ±5" | 15,000 | 48" | 60" | Aluminum | Painted Steel | Blue | Anchoring Legs, Telescoping Handles | 0000000 | 00000000 |
| ±7" | 10,000 | 60" | 60" | Aluminum | Painted Steel | Blue | Anchoring Legs, Telescoping Handles | 0000000 | 00000000 |
| ±7" | 15,000 | 60" | 60" | Aluminum | Painted Steel | Blue | Anchoring Legs, Telescoping Handles | 0000000 | 00000000 |
Portable Dock Plates with Forklift Loops
The heaviest dock plates we offer, these are built to endure high-traffic use. Forklift loops on the top flip up for easy maneuvering with a forklift and fold down when not in use. Use plates to bridge the gap between a truck and the dock when loading and unloading with forklifts, battery-operated hand trucks, and other powered equipment. They have a tread surface for positive traction and lips on the sides lessen the chance of vehicle runoff. Plates have anchoring pins that you drop into any of the eight holes along their edges—this secures the plate in the space between the dock and the truck.
Dock Plates | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Lip | Replacement Anchoring Pins | |||||||||
| Max. Ht. Differential | Capacity, lbs. | Lg. | Overall Wd. | Material | Material | Color | Each | Each | ||
| ±5" | 15,000 | 48" | 60" | Steel | Painted Steel | Blue | 0000000 | 000000000 | 0000000 | 000000 |
| ±5" | 15,000 | 48" | 72" | Steel | Painted Steel | Blue | 0000000 | 00000000 | 0000000 | 00000 |
| ±7" | 15,000 | 60" | 60" | Steel | Painted Steel | Blue | 0000000 | 00000000 | 0000000 | 00000 |
| ±7" | 15,000 | 60" | 72" | Steel | Painted Steel | Blue | 0000000 | 00000000 | 0000000 | 00000 |
| ±7" | 15,000 | 60" | 84" | Steel | Painted Steel | Blue | 0000000 | 00000000 | 0000000 | 00000 |
| ±8 1/2" | 15,000 | 72" | 60" | Steel | Painted Steel | Blue | 0000000 | 00000000 | 0000000 | 00000 |
| ±8 1/2" | 15,000 | 72" | 72" | Steel | Painted Steel | Blue | 0000000 | 00000000 | 0000000 | 00000 |
| ±8 1/2" | 20,000 | 72" | 72" | Steel | Painted Steel | Blue | 0000000 | 00000000 | 0000000 | 00000 |
| ±10" | 15,000 | 84" | 72" | Steel | Painted Steel | Blue | 0000000 | 00000000 | 0000000 | 00000 |