Sights for Oil Inspection
Continuously monitor oil quality through the clear plastic reservoir and use the attached drain valve to remove water accumulation. Sights can be mounted vertically or horizontally. To mount vertically, install through a port on the bottom of your tank. There must be enough clearance for the sight to fit below the tank base. In areas with limited space under equipment, install one of these sights horizontally through a port on the side of your tank.
For technical drawings and 3-D models, click on a part number.
Temp. Range, °F | |||||||
---|---|---|---|---|---|---|---|
Pipe Size | Window Dia. | Reservoir Capacity, oz. | Max. Pressure | Min. | Max. | Each | |
Brass | |||||||
NPT Male Thread | |||||||
1/4 | 1 3/4" | 1 | 65 psi @ 70° F | 30° | 180° | 0000000 | 000000 |
1/4 | 2 1/2" | 3 | 65 psi @ 70° F | 30° | 180° | 0000000 | 00000 |
3/8 | 1 3/4" | 1 | 65 psi @ 70° F | 30° | 180° | 0000000 | 00000 |
3/8 | 2 1/2" | 3 | 65 psi @ 70° F | 30° | 180° | 0000000 | 00000 |
1/2 | 1 3/4" | 1 | 65 psi @ 70° F | 30° | 180° | 0000000 | 00000 |
1/2 | 2 1/2" | 3 | 65 psi @ 70° F | 30° | 180° | 0000000 | 00000 |