For Use With For Use With | Show |
---|
|
For Use With For Use With | Hide |
---|
Housing Material Housing Material |
---|
|
Power Source Power Source |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Discharge Connection Type Discharge Connection Type |
---|
|
Discharge Gender Discharge Gender |
---|
|
Discharge Thread Type Discharge Thread Type |
---|
|
Liquid Suction Flow Rate @ 5 ft. of Lift Liquid Suction FlowRate @ 5 ft. of Lift |
---|
|
|
Intake Connection Type Intake Connection Type |
---|
|
Liquid Suction Flow Rate @ 10 ft. of Lift Liquid Suction FlowRate @ 10 ft. of Lift |
---|
|
|
Pump Type Pump Type |
---|
|
Liquid Suction Flow Rate @ 20 ft. of Lift Liquid Suction FlowRate @ 20 ft. of Lift |
---|
|
|
Intake Thread Type Intake Thread Type |
---|
|
Operating Pressure Operating Pressure |
---|
|
Maximum Suction Lift Maximum Suction Lift |
---|
|
Suction Connection Type Suction Connection Type |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
Metal Liquid-Powered Jet Pumps


Powered by liquid, use these to pump a second liquid or to produce emulsions, elevate water, and transport grains and other small particles. When high-pressure liquid enters the intake, it creates suction that draws a second liquid into the pump body and discharges a pressurized blend of the two. The discharge pressure is greater than the suction flow but lower than the intake pressure. They have no moving parts or seals, eliminating downtime for lubrication and repairs. They're also known as eductors, ejectors, and injectors.
Note: Liquid suction flow rate is calculated using water at 100 psi with no feet of discharge head.
Bronze is more corrosion resistant than cast iron.
316 stainless steel pumps are the most corrosion-resistant metal option.
For technical drawings and 3-D models, click on a part number.
Liquid Suction Flow Rate, gpm | Suction | Intake | Discharge | Overall | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
@ 5 ft. of Lift | @ 10 ft. of Lift | @ 20 ft. of Lift | Max. Suction Lift, ft. | Operating Pressure, psi | Temp. Range, °F | Pipe Size | Thread Type | Pipe Size | Thread Type | Pipe Size | Thread Type | Lg. | Wd. | Each | |
For Use With Grain, Slurry, Water | |||||||||||||||
Cast Iron | |||||||||||||||
8 | 7 | 5 | 27 | 80 | -20° to 150° | 3/4 | NPT | 3/8 | NPT | 3/4 | NPT | 5 7/8" | 1 1/4" | 0000000 | 0000000 |
8 | 7 | 5 | 27 | 80 | -20° to 150° | 3/4 | NPT | 1/2 | NPT | 3/4 | NPT | 5 7/8" | 1 1/4" | 0000000 | 000000 |
14 | 12 | 9 | 27 | 80 | -20° to 150° | 1 | NPT | 1/2 | NPT | 1 | NPT | 7 1/8" | 1 3/4" | 0000000 | 000000 |
24 | 22 | 16 | 27 | 80 | -20° to 150° | 1 1/4 | NPT | 3/4 | NPT | 1 1/4 | NPT | 9" | 2 3/8" | 0000000 | 000000 |
40 | 36 | 27 | 27 | 80 | -20° to 150° | 1 1/2 | NPT | 1 | NPT | 1 1/2 | NPT | 11" | 2 5/8" | 0000000 | 000000 |
73 | 66 | 49 | 27 | 80 | -20° to 150° | 2 | NPT | 1 1/4 | NPT | 2 | NPT | 14 3/8" | 3 1/2" | 0000000 | 000000 |
127 | 114 | 86 | 27 | 80 | -20° to 150° | 2 1/2 | NPT | 1 1/2 | NPT | 2 1/2 | NPT | 18 1/8" | 4 1/2" | 0000000 | 000000 |
237 | 213 | 160 | 27 | 80 | -20° to 150° | 3 | NPT | 2 | NPT | 3 | NPT | 23 7/8" | 6 1/8" | 0000000 | 00000000 |
Bronze | |||||||||||||||
8 | 7 | 5 | 27 | 15-200 | -20° to 150° | 3/4 | NPT | 3/8 | NPT | 3/4 | NPT | 5 7/8" | 1 1/4" | 0000000 | 000000 |
8 | 7 | 5 | 27 | 15-200 | -20° to 150° | 3/4 | NPT | 1/2 | NPT | 3/4 | NPT | 5 7/8" | 1 1/4" | 0000000 | 000000 |
14 | 12 | 9 | 27 | 15-200 | -20° to 150° | 1 | NPT | 1/2 | NPT | 1 | NPT | 7 1/8" | 1 3/4" | 0000000 | 000000 |
24 | 22 | 16 | 27 | 15-200 | -20° to 150° | 1 1/4 | NPT | 3/4 | NPT | 1 1/4 | NPT | 9" | 2 3/8" | 0000000 | 000000 |
40 | 36 | 27 | 27 | 15-200 | -20° to 150° | 1 1/2 | NPT | 1 | NPT | 1 1/2 | NPT | 11" | 2 5/8" | 0000000 | 000000 |
73 | 66 | 49 | 27 | 15-200 | -20° to 150° | 2 | NPT | 1 1/4 | NPT | 2 | NPT | 14 3/8" | 3 1/2" | 0000000 | 000000 |
127 | 114 | 86 | 27 | 15-200 | -20° to 150° | 2 1/2 | NPT | 1 1/2 | NPT | 2 1/2 | NPT | 18 1/8" | 4 1/2" | 0000000 | 00000000 |
237 | 213 | 160 | 27 | 15-200 | -20° to 150° | 3 | NPT | 2 | NPT | 3 | NPT | 23 7/8" | 6 1/8" | 0000000 | 00000000 |
316 Stainless Steel | |||||||||||||||
8 | 7 | 5 | 27 | 15-200 | -150° to 150° | 3/4 | NPT | 3/8 | NPT | 3/4 | NPT | 5 7/8" | 1 1/4" | 0000000 | 000000 |
8 | 7 | 5 | 27 | 15-200 | -150° to 150° | 3/4 | NPT | 1/2 | NPT | 3/4 | NPT | 5 7/8" | 1 1/4" | 0000000 | 000000 |
14 | 12 | 9 | 27 | 15-200 | -150° to 150° | 1 | NPT | 1/2 | NPT | 1 | NPT | 7 1/8" | 1 3/4" | 0000000 | 000000 |
24 | 22 | 16 | 27 | 15-200 | -150° to 150° | 1 1/4 | NPT | 3/4 | NPT | 1 1/4 | NPT | 9" | 2 3/8" | 0000000 | 000000 |
40 | 36 | 27 | 27 | 15-200 | -150° to 150° | 1 1/2 | NPT | 1 | NPT | 1 1/2 | NPT | 11" | 2 5/8" | 0000000 | 000000 |
73 | 66 | 49 | 27 | 15-200 | -150° to 150° | 2 | NPT | 1 1/4 | NPT | 2 | NPT | 14 3/8" | 3 1/2" | 0000000 | 00000000 |
127 | 114 | 86 | 27 | 15-200 | -150° to 150° | 2 1/2 | NPT | 1 1/2 | NPT | 2 1/2 | NPT | 18 1/8" | 4 1/2" | 0000000 | 00000000 |
237 | 213 | 160 | 27 | 15-200 | -150° to 150° | 3 | NPT | 2 | NPT | 3 | NPT | 23 7/8" | 6 1/8" | 0000000 | 00000000 |
Chemical-Resistant Plastic Liquid-Powered Jet Pumps


Made from PVC, these pumps are highly corrosion resistant and lightweight. Use them to produce emulsions, elevate water, and transport grains and other small particles. When high-pressure liquid enters the intake, it creates suction that draws a second liquid or gas into the pump body and discharges a pressurized blend of the two. The discharge pressure is greater than the suction flow but lower than the intake pressure. They have no moving parts or seals, eliminating downtime for lubrication and repairs. They're also known as eductors, ejectors, and injectors.
Note: Liquid suction flow rate is calculated using water at 100 psi with no feet of discharge head.
For technical drawings and 3-D models, click on a part number.
Liquid Suction Flow Rate, gpm | Suction | Intake | Discharge | Overall | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
@ 5 ft. of Lift | @ 10 ft. of Lift | @ 20 ft. of Lift | Max. Suction Lift, ft. | Operating Pressure, psi | Max. Temp., °F | Pipe Size | Thread Type | Pipe Size | Thread Type | Pipe Size | Thread Type | Lg. | Wd. | Each | |
For Use With Grain, Slurry, Water | |||||||||||||||
PVC Plastic | |||||||||||||||
8 | 7 | 5 | 27 | 100 | 70° | 3/4 | NPT | 1/2 | NPT | 3/4 | NPT | 5 3/4" | 2" | 0000000 | 0000000 |
14 | 12 | 9 | 27 | 100 | 70° | 1 | NPT | 1/2 | NPT | 1 | NPT | 6 7/8" | 2 1/2" | 0000000 | 000000 |
24 | 22 | 16 | 27 | 100 | 70° | 1 1/4 | NPT | 3/4 | NPT | 1 1/4 | NPT | 9 1/8" | 3" | 0000000 | 000000 |
40 | 36 | 27 | 27 | 100 | 70° | 1 1/2 | NPT | 1 | NPT | 1 1/2 | NPT | 11" | 3 1/2" | 0000000 | 000000 |
73 | 66 | 49 | 27 | 100 | 70° | 2 | NPT | 1 1/4 | NPT | 2 | NPT | 14 1/4" | 4" | 0000000 | 000000 |
127 | 114 | 86 | 27 | 100 | 70° | 2 1/2 | NPT | 1 1/2 | NPT | 2 1/2 | NPT | 18 1/2" | 5" | 0000000 | 00000000 |
237 | 213 | 160 | 27 | 100 | 70° | 3 | NPT | 2 | NPT | 3 | NPT | 24 1/4" | 6" | 0000000 | 00000000 |