These rollers have 2 1/2" or 3 1/2" diameters.

Conveyors are made of corrosion-resistant stainless steel, making them suitable for washdown applications.

For more demanding shipping and assembly applications, these conveyors can carry heavy loads. They are made of corrosion-resistant stainless steel making them suitable for washdown applications.

Also known as line-shaft conveyors, these conveyors are driven by a drive shaft and round belts.

Move delicate items, such as glass and painted parts, through your facility without scratching or denting them.

Expand, retract, and curve these conveyors wherever you need them—they’re ready to run once you plug them in.

Rollers have diameters between 2" and 4".

These rollers have diameters 1 3/8" and below.

Made from stainless steel, these rollers are suitable for washdown applications. They have a standard 1.9" diameter to fit most roller conveyors.

Choose the width you need from 6" to 60" in 1/16" increments.

These rollers have 0.78" diameters.

Rollers have maintenance-free, precision bearings to reduce conveyor noise.

Improve tracking on curved conveyor sections. Rollers taper so packages maintain their orientation through the curve.

Rollers have a standard 1.9" diameter to fit most roller conveyors.

We'll get the between frame width and groove spacing you need in 1/16" increments.

Rollers are tapered for use on curved conveyor sections.

We'll get the between frame width and sprocket spacing you need in 1/16" increments.

Use these bearings to replace worn and damaged bearings or press-fit them into tubing or pipe to create a roller. All have a hex-shaped axle.

Sleeve bearings ride directly on the axle and have no moving parts to wear out.

Use in pairs to support a conveyor roller or package stop.

Also known as pallet brakes, these reducers mount on a gravity conveyor and create friction on the rollers to control the conveyor's speed.

Covers fit loosely over the roller to allow packages to accumulate. Rollers can continue spinning inside the cover without causing damage to packages.

Configure wheels where you need them on these economical rails that you can cut to length.

The flange on the wheels separates and guides packages as they flow down the rails.

Replace damaged wheels or use multiple wheels to build a custom conveyor.

These wheels have rollers that rotate around the wheel core to allow movement in any direction.

An accordion-style frame lets you quickly curve, expand, and retract these conveyors. They have skate wheels for flat-bottom objects in assembly lines or packaging and shipping applications.

Extend these conveyors more than 60 ft. to move items over long stretches and then retract them to a more compact 10 ft. for storage. Often used to load trailers, they’re best for light duty loading of boxes and other flat-bottomed objects.

These plates are designed to rest on a flat surface and are good for rotating and positioning heavy workpieces.

Unlike most ball transfers, which have metal balls, these have a plastic outer ball that rolls on stainless steel inner balls, so there's no metal-on-metal contact that could create and release particles into your clean room. They've also been ultrasonically cleaned and then individually bagged to prevent dust contamination.

Install these ball transfers in a threaded hole or use a nut to secure.

To keep out dirt and debris, these flange-mount ball transfers have a double-sealed ball and side vents that expel contaminants.

These ball transfers have capacities up to 2,400 lbs.

With a ball recessed into the mounting surface, these ball transfers have a low profile. Their double-sealed ball keeps out dirt and debris, and side vents expel contaminants.

Transfers recess into the mounting surface for a low profile.

A large-diameter rubber ball handles delicate or polished surfaces. The stem spins and the ball rotates around the stem.

Drop-in design makes for easy installation.

Add rollers to T-slotted framing to create flow rails, ball transfer tables, and other manual conveyors.

Easily load and unload heavy material from one surface to another—just slide it across the roller top of these tables.