Base Material Base Material |
|---|
|
Mount Type Mount Type | Show |
|---|
|
Mount Type Mount Type | Hide |
|---|
Capacity Capacity |
|---|
Movement Movement |
|---|
 |  |
| Rigid | 180° Pivot |
Ring Material Ring Material |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Material Material |
|---|
|
Base Finish Base Finish |
|---|
|
Floor-Mount Clamp-Style Supports
For a secure hold on pipe and conduit suspended above the ground, these supports have a cushioned clamp provides a 360° grip while reducing vibration. To install, add an extension pipe (not included) that is approximately 4" shorter than the desired height. Tack weld pipe to the base and support, then bolt the base to the floor. Fine-tune the overall height using the adjustment screw.
Galvanized steel supports have good corrosion resistance. 304 stainless steel supports have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
For OD | Cushion | Base | Mounting Hole | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric, mm | For Pipe Size  | Cap., lbs. | For Extension Pipe Size | Adjustment Screw Ht. | Clamp Thick. | Material | Color | Lg. | Wd. | Dia. | No. of | Mounting Hardware Included | Temp. Range, °F | Each | |
Galvanized Steel | ||||||||||||||||
| 2 3/8" | 60 | 2 | 10,000 | 2 | 7"-10" | 3/8" | Neoprene Rubber | Black | 6" | 4" | 9/16" | 2 | No | -70° to 200° | 0000000 | 0000000 |
| 3 1/2" | 89 | 3 | 10,000 | 2 | 7"-10" | 3/8" | Neoprene Rubber | Black | 6" | 4" | 9/16" | 2 | No | -70° to 200° | 0000000 | 000000 |
| 4 1/2" | 114 | 4 | 10,000 | 2 | 7"-10" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 0000000 | 000000 |
| 6 5/8" | 168 | 6 | 10,000 | 2 | 7"-10" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 0000000 | 000000 |
| 8 5/8" | 219 | 8 | 10,000 | 2 | 7"-10" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 0000000 | 000000 |
| 10 3/4" | 273 | 10 | 10,000 | 2 | 7"-10" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 0000000 | 000000 |
| 12 3/4" | 324 | 12 | 10,000 | 2 | 7"-10" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 0000000 | 000000 |
304 Stainless Steel | ||||||||||||||||
| 2 3/8" | 60 | 2 | 10,000 | 2 | 7"-10" | 3/8" | Neoprene Rubber | Black | 6" | 4" | 9/16" | 2 | No | -70° to 200° | 00000000 | 000000 |
| 3 1/2" | 89 | 3 | 10,000 | 2 | 7"-10" | 3/8" | Neoprene Rubber | Black | 6" | 4" | 9/16" | 2 | No | -70° to 200° | 00000000 | 000000 |
| 4 1/2" | 114 | 4 | 10,000 | 2 | 7"-10" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 00000000 | 000000 |
| 6 5/8" | 168 | 6 | 10,000 | 2 | 7"-10" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 00000000 | 000000 |
| 8 5/8" | 219 | 8 | 10,000 | 2 | 7"-10" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 00000000 | 000000 |
| 10 3/4" | 273 | 10 | 10,000 | 2 | 7"-10" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 00000000 | 000000 |
| 12 3/4" | 324 | 12 | 10,000 | 2 | 7"-10" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 00000000 | 000000 |
Floor-Mount Saddle-Style Supports
These U-shaped supports allow access to pipe and conduit after installation. Use them to suspend pipe, tube, and conduit above the floor. To install, add an extension pipe (not included) that is approximately 4" shorter than the desired height. Tack weld pipe to the base and support, then bolt the base to the floor. Fine-tune the overall height using the adjustment screw.
Galvanized steel supports have good corrosion resistance. 304 stainless steel supports have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
For OD | Saddle | Cushion | Base | Mounting Hole | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric, mm | For Pipe Size | Cap., lbs. | For Extension Pipe Size | Adjustment Screw Ht. | Wd. | Thick. | Material | Color | Lg. | Wd. | Dia. | No. of | Mounting Hardware Included | Temp. Range, °F | Each | |
Galvanized Steel | |||||||||||||||||
| 2 3/8" | 60 | 2 | 10,000 | 2 | 7"-10" | 2" | 3/8" | Neoprene Rubber | Black | 6" | 4" | 9/16" | 2 | No | -70° to 200° | 0000000 | 0000000 |
| 2 7/8" | 73 | 2 1/2 | 10,000 | 2 | 7"-10" | 2" | 3/8" | Neoprene Rubber | Black | 6" | 4" | 9/16" | 2 | No | -70° to 200° | 0000000 | 000000 |
| 3 1/2" | 89 | 3 | 10,000 | 2 | 7"-10" | 2" | 3/8" | Neoprene Rubber | Black | 6" | 4" | 9/16" | 2 | No | -70° to 200° | 0000000 | 000000 |
| 4 1/2" | 114 | 4 | 10,000 | 2 | 7"-10" | 2" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 0000000 | 000000 |
| 6 5/8" | 168 | 6 | 10,000 | 2 | 7"-10" | 2" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 0000000 | 000000 |
| 8 5/8" | 219 | 8 | 10,000 | 2 | 7"-10" | 2" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 0000000 | 000000 |
| 10 3/4" | 273 | 10 | 10,000 | 2 | 7"-10" | 2" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 0000000 | 000000 |
| 12 3/4" | 324 | 12 | 10,000 | 2 | 7"-10" | 2" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 0000000 | 000000 |
| 15 1/4" | 387 | 14 | 20,000 | 3 | 10"-13" | 3" | 5/8" | Neoprene Rubber | Black | 8" | 8" | 3/4" | 4 | No | -70° to 200° | 00000000 | 000000 |
| 17 3/8" | 441 | 16 | 20,000 | 3 | 10"-13" | 3" | 5/8" | Neoprene Rubber | Black | 8" | 8" | 3/4" | 4 | No | -70° to 200° | 00000000 | 000000 |
| 19 1/2" | 495 | 18 | 30,000 | 4 | 10"-13" | 4" | 3/4" | Neoprene Rubber | Black | 8" | 8" | 3/4" | 4 | No | -70° to 200° | 00000000 | 000000 |
| 21 1/2" | 546 | 20 | 30,000 | 4 | 10"-13" | 4" | 3/4" | Neoprene Rubber | Black | 8" | 8" | 3/4" | 4 | No | -70° to 200° | 00000000 | 000000 |
| 25 3/4" | 654 | 24 | 30,000 | 4 | 10"-13" | 4" | 3/4" | Neoprene Rubber | Black | 8" | 8" | 3/4" | 4 | No | -70° to 200° | 00000000 | 000000 |
| 30" | 762 | 30 | 30,000 | 6 | 13"-16" | 5" | 1" | Neoprene Rubber | Black | 15" | 15" | 1" | 4 | No | -70° to 200° | 00000000 | 000000 |
| 32" | 813 | 30 | 30,000 | 6 | 13"-16" | 5" | 1" | Neoprene Rubber | Black | 15" | 15" | 1" | 4 | No | -70° to 200° | 00000000 | 000000 |
| 36" | 914 | 36 | 30,000 | 6 | 13"-16" | 5" | 1" | Neoprene Rubber | Black | 15" | 15" | 1" | 4 | No | -70° to 200° | 00000000 | 000000 |
| 38 1/4" | 971 | 36 | 30,000 | 6 | 13"-16" | 5" | 1" | Neoprene Rubber | Black | 15" | 15" | 1" | 4 | No | -70° to 200° | 00000000 | 000000 |
304 Stainless Steel | |||||||||||||||||
| 2 3/8" | 60 | 2 | 10,000 | 2 | 7"-10" | 2" | 3/8" | Neoprene Rubber | Black | 6" | 4" | 9/16" | 2 | No | -70° to 200° | 00000000 | 000000 |
| 2 7/8" | 73 | 2 1/2 | 10,000 | 2 | 7"-10" | 2" | 3/8" | Neoprene Rubber | Black | 6" | 4" | 9/16" | 2 | No | -70° to 200° | 00000000 | 000000 |
| 3 1/2" | 89 | 3 | 10,000 | 2 | 7"-10" | 2" | 3/8" | Neoprene Rubber | Black | 6" | 4" | 9/16" | 2 | No | -70° to 200° | 00000000 | 000000 |
| 4 1/2" | 114 | 4 | 10,000 | 2 | 7"-10" | 2" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 00000000 | 000000 |
| 6 5/8" | 168 | 6 | 10,000 | 2 | 7"-10" | 2" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 00000000 | 000000 |
| 8 5/8" | 219 | 8 | 10,000 | 2 | 7"-10" | 2" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 00000000 | 000000 |
| 10 3/4" | 273 | 10 | 10,000 | 2 | 7"-10" | 2" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 00000000 | 000000 |
| 12 3/4" | 324 | 12 | 10,000 | 2 | 7"-10" | 2" | 1/2" | Neoprene Rubber | Black | 8" | 8" | 9/16" | 4 | No | -70° to 200° | 00000000 | 000000 |
| 15 1/4" | 387 | 14 | 20,000 | 3 | 10"-13" | 3" | 5/8" | Neoprene Rubber | Black | 8" | 8" | 3/4" | 4 | No | -70° to 200° | 00000000 | 000000 |
| 17 3/8" | 441 | 16 | 20,000 | 3 | 10"-13" | 3" | 5/8" | Neoprene Rubber | Black | 8" | 8" | 3/4" | 4 | No | -70° to 200° | 00000000 | 000000 |
| 19 1/2" | 495 | 18 | 30,000 | 4 | 10"-13" | 4" | 3/4" | Neoprene Rubber | Black | 8" | 8" | 3/4" | 4 | No | -70° to 200° | 00000000 | 000000 |
| 21 1/2" | 546 | 20 | 30,000 | 4 | 10"-13" | 4" | 3/4" | Neoprene Rubber | Black | 8" | 8" | 3/4" | 4 | No | -70° to 200° | 00000000 | 000000 |
| 25 3/4" | 654 | 24 | 30,000 | 4 | 10"-13" | 4" | 3/4" | Neoprene Rubber | Black | 8" | 8" | 3/4" | 4 | No | -70° to 200° | 00000000 | 000000 |
| 30" | 762 | 30 | 30,000 | 6 | 13"-16" | 5" | 1" | Neoprene Rubber | Black | 15" | 15" | 1" | 4 | No | -70° to 200° | 00000000 | 00000000 |
| 32" | 813 | 30 | 30,000 | 6 | 13"-16" | 5" | 1" | Neoprene Rubber | Black | 15" | 15" | 1" | 4 | No | -70° to 200° | 00000000 | 00000000 |
| 36" | 914 | 36 | 30,000 | 6 | 13"-16" | 5" | 1" | Neoprene Rubber | Black | 15" | 15" | 1" | 4 | No | -70° to 200° | 00000000 | 00000000 |
| 38 1/4" | 971 | 36 | 30,000 | 6 | 13"-16" | 5" | 1" | Neoprene Rubber | Black | 15" | 15" | 1" | 4 | No | -70° to 200° | 00000000 | 00000000 |
Floor-Mount Flange-Style Supports
Bolt these supports directly to a pipe flange to suspend a run of pipe above the floor. Unlike clamps and hangers, which fasten to walls and ceilings, these supports mount to the ground. To install, add an extension pipe (not included) that is approximately 4" shorter than the desired height. Tack weld pipe to the base and support, then bolt the base to the floor. Fine-tune the overall height using the adjustment screw.
Galvanized steel supports have good corrosion resistance. 304 stainless steel supports have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
For OD | Flange Plate | Base | Mounting Hole | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric, mm | For Flange ANSI Class | For Pipe Size | Cap., lbs. | For Extension Pipe Size | Adjustment Screw Ht. | Hole Ctr.-to-Ctr. | Hole Dia. | Lg. | Wd. | Dia. | No. of | Mounting Hardware Included | Each | |
Galvanized Steel | |||||||||||||||
| 2 3/8" | 60 | 125 | 2 | 10,000 | 2 | 7"-10" | 3 3/8" | 3/4" | 6" | 4" | 9/16" | 2 | No | 0000000 | 0000000 |
| 3 1/2" | 89 | 125 | 3 | 10,000 | 2 | 7"-10" | 4 1/4" | 3/4" | 6" | 4" | 9/16" | 2 | No | 0000000 | 000000 |
| 4 1/2" | 114 | 125 | 4 | 10,000 | 2 | 7"-10" | 2 7/8" | 3/4" | 6" | 4" | 9/16" | 2 | No | 0000000 | 000000 |
| 6 5/8" | 168 | 125 | 6 | 10,000 | 2 | 7"-10" | 3 5/8" | 7/8" | 6" | 4" | 9/16" | 2 | No | 0000000 | 000000 |
| 8 5/8" | 219 | 125 | 8 | 10,000 | 2 | 7"-10" | 4 1/2" | 7/8" | 6" | 4" | 9/16" | 2 | No | 0000000 | 000000 |
| 10 3/4" | 273 | 125 | 10 | 10,000 | 2 | 7"-10" | 3 11/16" | 1" | 6" | 4" | 9/16" | 2 | No | 0000000 | 000000 |
| 12 3/4" | 324 | 125 | 12 | 10,000 | 2 | 7"-10" | 4 3/8" | 1" | 6" | 4" | 9/16" | 2 | No | 0000000 | 000000 |
304 Stainless Steel | |||||||||||||||
| 2 3/8" | 60 | 125 | 2 | 10,000 | 2 | 7"-10" | 3 3/8" | 3/4" | 6" | 4" | 9/16" | 2 | No | 00000000 | 000000 |
| 3 1/2" | 89 | 125 | 3 | 10,000 | 2 | 7"-10" | 4 1/4" | 3/4" | 6" | 4" | 9/16" | 2 | No | 00000000 | 000000 |
| 4 1/2" | 114 | 125 | 4 | 10,000 | 2 | 7"-10" | 2 7/8" | 3/4" | 6" | 4" | 9/16" | 2 | No | 00000000 | 000000 |
| 6 5/8" | 168 | 125 | 6 | 10,000 | 2 | 7"-10" | 3 5/8" | 7/8" | 6" | 4" | 9/16" | 2 | No | 00000000 | 000000 |
| 8 5/8" | 219 | 125 | 8 | 10,000 | 2 | 7"-10" | 4 1/2" | 7/8" | 6" | 4" | 9/16" | 2 | No | 00000000 | 000000 |
| 10 3/4" | 273 | 125 | 10 | 10,000 | 2 | 7"-10" | 3 11/16" | 1" | 6" | 4" | 9/16" | 2 | No | 00000000 | 000000 |
| 12 3/4" | 324 | 125 | 12 | 10,000 | 2 | 7"-10" | 4 3/8" | 1" | 6" | 4" | 9/16" | 2 | No | 00000000 | 000000 |
Tie-Down Rings
These rings pivot to secure loads in various directions.
Zinc-plated steel and powder-coated steel rings have mild corrosion resistance.
18-8 stainless steel rings have good corrosion resistance.
316 stainless steel rings have excellent resistance to salt water and chemicals.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Ring | Base | Mounting Holes | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Capacity, lbs. | Inner Wd. | Ht. | Thick. | Style | Lg. | Wd. | Material | Mounting Fasteners Included | No. of | Dia. | Each | |
Zinc-Plated Steel | |||||||||||||
| A | 500 | 2" | 2 1/4" | 1/4" | D-Ring | 1 5/16" | 1 5/8" | Zinc-Plated Steel | No | 1 | 13/32" | 0000000 | 00000 |
18-8 Stainless Steel | |||||||||||||
| A | 400 | 1 1/2" | 1 1/2" | 3/16" | D-Ring | 1 5/16" | 1 1/8" | 18-8 Stainless Steel | No | 1 | 3/8" | 00000000 | 0000 |
316 Stainless Steel | |||||||||||||
| A | 50 | 13/16" | 7/8" | 1/8" | D-Ring | 13/16" | 11/16" | 316 Stainless Steel | No | 1 | 1/4" | 00000000 | 0000 |
Dimpled Tie-Down Rings
Dimples hold the base tight to prevent it from swiveling.
Style B has loose rings that twist to minimize abrasion on webbing and rope.
Zinc-plated steel rings have mild corrosion resistance.
304 stainless steel rings have good corrosion resistance.
316 stainless steel rings have excellent chemical and corrosion resistance, so they won’t rust in marine environments.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Ring | Base | Mounting Holes | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Inner Wd. | Ht. | Thick. | Style | Lg. | Wd. | Material | Mounting Fasteners Included | No. of | Dia. | Each | |
Style A | ||||||||||||
Zinc-Plated Steel—Grade 80 | ||||||||||||
| 5,600 | 1 1/4" | 1 1/4" | 1/2" | Round | 2 3/8" | 2" | Zinc-Plated Steel—Grade 80 | No | 1 | 3/8" | 00000000 | 00000 |
304 Stainless Steel | ||||||||||||
| 6,700 | 1 3/16" | 1 1/4" | 1/2" | Round | 2 3/8" | 1 11/16" | 304 Stainless Steel | No | 1 | 3/8" | 00000000 | 0000 |
316 Stainless Steel | ||||||||||||
| 5,620 | 1 1/4" | 1 1/4" | 1/2" | Round | 2 3/8" | 2" | 316 Stainless Steel | No | 1 | 3/8" | 00000000 | 0000 |
Style B | ||||||||||||
Zinc-Plated Steel—Grade 80 | ||||||||||||
| 5,600 | 1 1/4" | 3 3/4" | 3/8" | Round | 2 3/8" | 2" | Zinc-Plated Steel—Grade 80 | No | 1 | 3/8" | 00000000 | 00000 |
316 Stainless Steel | ||||||||||||
| 5,620 | 1 1/4" | 3 1/2" | 3/8" | Round | 2 1/2" | 2" | 316 Stainless Steel | No | 1 | 3/8" | 00000000 | 00000 |
Tie-Down Hooks
Warning: Never use for lifting applications.
Hook | Base | Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Opening Wd. | Usable Lg. | Material | Overall Ht. | Lg. | Wd. | Thick. | Material | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Wd. | Ctr.-to-Ctr. Lg. | Each | |
J-Hook | |||||||||||||||
| 300 | 3/16" | 11/16" | Zinc-Plated Steel | 11/16" | 3/4" | 1" | 1/16" | Zinc-Plated Steel | No | 2 | 7/32" | 1/2" | __ | 0000000 | 000000 |
Latch | |||||||||||||||
| 350 | 1/4" | 1 1/16" | 316 Stainless Steel | 1 1/8" | 1 3/4" | 1 1/4" | 3/16" | 316 Stainless Steel | No | 4 | 3/16" | 3/4" | 1 5/32" | 0000000 | 00000 |
Carabiner | |||||||||||||||
| 5,600 | 1" | 4 5/8" | 316 Stainless Steel | 7 1/4" | 2 3/8" | 2" | __ | 316 Stainless Steel | No | 1 | 3/8" | __ | __ | 0000000 | 00000 |
Bolt-Mount Retractors
Reel with Clamp
Tool Attachment
with Split Ring
Tool Attachment
Bracket Tool
Attachment
with Solid Ring
Tool Attachment
Hang a tool or object overhead, pulling it down when you need it. Let go and the cable pulls it back up. Choose a load capacity that is sufficient for the total load you'll place on the retractor. This includes the tool plus any fittings, hose, or power cords.
For technical drawings and 3-D models, click on a part number.
Capacity, lbs. | Cable | Housing | Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Min. | Max. | Travel, ft. | Dia. | Material | Ht. When Retracted | Wd. | Dia. | Dp. | Ht. | Material | Overall Wd. | Mounting Fasteners Included | No. of | Dia. | For Screw Size | Each | |
Enclosed Reel | |||||||||||||||||
Clamp Tool Attachment | |||||||||||||||||
| 0.5 | 0.6 | 2 | 1/8" | Stainless Steel | 3 1/2" | 2" | 2" | 1/2" | __ | Steel | 2" | No | 2 | 3/16" | No. 8 | 000000 | 000000 |
| 0.5 | 0.6 | 4 | 1/32" | Stainless Steel | 3 1/4" | 2" | 2" | 1/2" | __ | Steel | 2" | No | 2 | 3/16" | No. 8 | 0000000 | 00000 |
Split Ring Tool Attachment | |||||||||||||||||
| 0.5 | 0.6 | 2 | 1/8" | Stainless Steel | 3 1/2" | 2" | 2" | 1/2" | __ | Steel | 2" | No | 2 | 3/16" | No. 8 | 000000 | 00000 |
| 0.5 | 0.6 | 4 | 1/32" | Stainless Steel | 3 1/4" | 2" | 2" | 1/2" | __ | Steel | 2" | No | 2 | 3/16" | No. 8 | 0000000 | 00000 |
Bracket Tool Attachment | |||||||||||||||||
| 0.5 | 0.6 | 4 | 1/32" | Stainless Steel | 2 1/2" | 2" | 2" | 1/2" | __ | Steel | 2" | No | 2 | 3/16" | No. 8 | 0000000 | 00000 |
Solid Ring Tool Attachment | |||||||||||||||||
| __ | 0.5 | 8 | 1/16" | Plastic-Coated Stainless Steel | 3 3/4" | 2 1/4" | __ | 1" | 3 3/4" | Aluminum | 2 1/4" | No | 4 | 3/16" | No. 8 | 00000000 | 000000 |
| __ | 1 | 5 | 1/16" | Plastic-Coated Stainless Steel | 3 3/4" | 2 1/4" | __ | 1" | 3 3/4" | Aluminum | 2 1/4" | No | 4 | 3/16" | No. 8 | 00000000 | 000000 |
| __ | 2 | 4 | 1/16" | Plastic-Coated Stainless Steel | 3 3/4" | 2 1/4" | __ | 1" | 3 3/4" | Aluminum | 2 1/4" | No | 4 | 3/16" | No. 8 | 00000000 | 000000 |
| __ | 3 | 3 | 1/16" | Plastic-Coated Stainless Steel | 3 3/4" | 2 1/4" | __ | 1" | 3 3/4" | Aluminum | 2 1/4" | No | 4 | 3/16" | No. 8 | 00000000 | 000000 |
| __ | 4 | 2 1/2 | 1/16" | Plastic-Coated Stainless Steel | 3 3/4" | 2 1/4" | __ | 1" | 3 3/4" | Aluminum | 2 1/4" | No | 4 | 3/16" | No. 8 | 00000000 | 000000 |
Open Reel | |||||||||||||||||
Solid Ring Tool Attachment | |||||||||||||||||
| __ | 0.8 | 5 | 1/16" | Plastic-Coated Stainless Steel | 2 1/2" | 2 1/2" | __ | 3/4" | 2" | Steel | 2 1/2" | No | 2 | 0.238" | No. 12 | 00000000 | 000000 |
Bolt-Mount Retractors with Stem
Drill through the stem to mount. Hang a tool or object overhead, pulling it down when you need it. Let go and the cable pulls it back up. Choose a load capacity that is sufficient for the total load you'll place on the retractor. This includes the tool plus any fittings, hose, or power cords.
For technical drawings and 3-D models, click on a part number.
Hooks for Powered Overhead Beam Conveyors
Hooks allow items to rotate 90° degrees while suspended. They attach to trolleys with a bolt and nut.
For technical drawings and 3-D models, click on a part number.
Hook | ||||||||
|---|---|---|---|---|---|---|---|---|
| Opening Wd. | Usable Lg. | Movement | Material | Mounting Fasteners Included | Mounting Hole Dia. | Max. Temp., °F | Each | |
| 1 1/4" | 4 1/8" | 90° Rotation | Iron | No | 1/2" | 450° | 0000000 | 000000 |