Mount Type Mount Type | Show |
|---|
|
Mount Type Mount Type | Hide |
|---|
For Suspending For Suspending |
|---|
 |  |  |
| Threaded Rod | Pipe | Tie Wire |
Beam Location Beam Location |
|---|
 |  |
| Bottom Mount | Top Mount |
System of Measurement System of Measurement |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Mounting Location Mounting Location |
|---|
|
For Mounting Orientation For Mounting Orientation |
|---|
 |
| Perpendicular |
 |
| Parallel |
For Maximum Panel Thickness For Maximum Panel Thickness |
|---|
|
Press-Fit Beam Clamps for Threaded Rod
A toothed clip secures these clamps to the beam—no fasteners required. Lightly tap with a hammer to install.
For technical drawings and 3-D models, click on a part number.
For Beam Thick. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Beam Shape | For Thread Size  | Min. | Max. | Capacity, lbs. | Mount Type | Lg. | Wd. | Ht. | Threaded Rod Included | Each | |
Bottom and Top Mount | |||||||||||
Steel | |||||||||||
| Flat, Tapered | 1/4"-20 | 1/8" | 1/4" | 150 | Press Fit | 7/8" | 1 3/8" | 1 7/8" | No | 00000000 | 00000 |
| Flat, Tapered | 1/4"-20 | 5/16" | 1/2" | 150 | Press Fit | 7/8" | 1 3/8" | 2 1/4" | No | 00000000 | 0000 |
| Flat, Tapered | 1/4"-20 | 9/16" | 3/4" | 150 | Press Fit | 7/8" | 1 3/8" | 2 3/8" | No | 00000000 | 0000 |
| Flat, Tapered | 3/8"-16 | 1/8" | 1/4" | 150 | Press Fit | 7/8" | 1 3/8" | 1 7/8" | No | 00000000 | 0000 |
| Flat, Tapered | 3/8"-16 | 5/16" | 1/2" | 150 | Press Fit | 7/8" | 1 3/8" | 2 1/4" | No | 00000000 | 0000 |
| Flat, Tapered | 3/8"-16 | 9/16" | 3/4" | 150 | Press Fit | 7/8" | 1 3/8" | 2 3/8" | No | 00000000 | 0000 |
Easy-Position Beam Clamps for Pipe, Tube, and Conduit
Suspend material at any angle from the beam. Clamps have a fixed jaw that secures to the beam and a hanger that swivels 360° to position material and accommodate for misalignment.
Install press-fit clamps by lightly hammering them onto the beam.
For technical drawings and 3-D models, click on a part number.
For OD | For Beam Thick. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mount Type | For Beam Shape | Inch | Metric, mm | For Pipe Size | Min. | Max. | Capacity, lbs. | Range of Motion | Throat Dp. | Surface to Pipe Center | Lg. | Wd. | Ht. | Each | |
Bottom and Top Mount | |||||||||||||||
Zinc-Plated Steel | |||||||||||||||
| Press Fit | Flat; Tapered | 3/4"-1" | 19-25 | 1/2 | 1/8" | 1/4" | 75 | 360° | 1 1/4" | 1" | 1 1/4" | 1 1/2" | 3" | 00000000 | 00000 |
| Press Fit | Flat; Tapered | 3/4"-1" | 19-25 | 1/2 | 5/16" | 1/2" | 75 | 360° | 7/16" | 1 1/16" | 1 3/8" | 1 1/2" | 2 1/2" | 0000000 | 0000 |
| Press Fit | Flat; Tapered | 3/4"-1" | 19-25 | 1/2 | 9/16" | 3/4" | 75 | 360° | 1 3/8" | 1" | 1 1/2" | 1 3/4" | 3 1/2" | 00000000 | 0000 |
| Press Fit | Flat; Tapered | 3/4"-1" | 19-25 | 1/2 | 13/16" | 1 1/8" | 75 | 360° | 1 1/2" | 1" | 1 1/2" | 1 3/4" | 3 3/4" | 00000000 | 0000 |
| Press Fit | Flat; Tapered | 1 3/16"-1 5/16" | 30-33 | 1 | 1/8" | 1/4" | 75 | 360° | 1 1/4" | 1 1/2" | 1 1/4" | 1 1/2" | 3 1/2" | 00000000 | 0000 |
| Press Fit | Flat; Tapered | 1 3/16"-1 5/16" | 30-33 | 1 | 5/16" | 1/2" | 75 | 360° | 7/16" | 1 7/16" | 1 3/8" | 1 1/2" | 2 1/2" | 0000000 | 0000 |
| Press Fit | Flat; Tapered | 1 3/16"-1 5/16" | 30-33 | 1 | 9/16" | 3/4" | 75 | 360° | 1 3/8" | 1 1/2" | 1 1/2" | 1 3/4" | 4" | 00000000 | 0000 |
| Press Fit | Flat; Tapered | 1 5/16"-1 5/8" | 33-41 | 1 1/4 | 1/8" | 1/4" | 75 | 360° | 1 1/4" | 1 1/2" | 1 1/4" | 1 1/2" | 3 7/8" | 00000000 | 0000 |
| Press Fit | Flat; Tapered | 1 5/16"-1 5/8" | 33-41 | 1 1/4 | 5/16" | 1/2" | 75 | 360° | 7/16" | 1 3/4" | 1 3/8" | 1 1/2" | 3 3/4" | 0000000 | 0000 |
| Press Fit | Flat; Tapered | 1 5/16"-1 5/8" | 33-41 | 1 1/4 | 9/16" | 3/4" | 75 | 360° | 1 3/8" | 1 1/2" | 1 1/2" | 1 3/4" | 4 1/2" | 00000000 | 0000 |
| Press Fit | Flat; Tapered | 1 3/4"-1 7/8" | 44-48 | 1 1/2 | 1/8" | 1/4" | 75 | 360° | 1 1/4" | 1 5/8" | 1 1/4" | 1 1/2" | 4" | 00000000 | 0000 |
| Press Fit | Flat; Tapered | 1 3/4"-1 7/8" | 44-48 | 1 1/2 | 5/16" | 1/2" | 75 | 360° | 7/16" | 1 9/16" | 1 3/8" | 1 1/2" | 4 1/8" | 0000000 | 0000 |
| Press Fit | Flat; Tapered | 1 3/4"-1 7/8" | 44-48 | 1 1/2 | 9/16" | 3/4" | 75 | 360° | 1 3/8" | 1 5/8" | 1 1/2" | 1 3/4" | 4 3/4" | 00000000 | 0000 |
| Press Fit | Flat; Tapered | 1 7/8"-2 3/8" | 48-60 | 2 | 1/8" | 1/4" | 75 | 360° | 1 1/4" | 2" | 1 1/4" | 1 1/2" | 4 3/4" | 00000000 | 0000 |
| Press Fit | Flat; Tapered | 1 7/8"-2 3/8" | 48-60 | 2 | 5/16" | 1/2" | 75 | 360° | 7/16" | 1 15/16" | 1 3/8" | 1 1/2" | 4 5/8" | 0000000 | 0000 |
| Press Fit | Flat; Tapered | 1 7/8"-2 3/8" | 48-60 | 2 | 9/16" | 3/4" | 75 | 360° | 1 3/8" | 2" | 1 1/2" | 1 3/4" | 5 1/4" | 00000000 | 0000 |
Beam Clamps with Tie Wire Hanger
Attach these light duty hangers to beams and other structural elements. They include a stiff wire for supporting ceilings, lighting fixtures, and other lightweight material. Hammer the clamp onto a beam to install.
For technical drawings and 3-D models, click on a part number.
Routing Rings
Also known as bridle rings, routing rings have an open-eye design that allows you to quickly install wire and cable. Press-fit routing rings mount onto beams and other flat surfaces. A hole on the back of the jaw allows you to orient the ring horizontally. Lightly hammer to install.
For technical drawings and 3-D models, click on a part number.
Cable Holders
Mount to a surface to secure and route cable.
Push-in mount cable holders fit into a drilled hole.
For technical drawings and 3-D models, click on a part number.
Overall | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | For Max. Bundle Dia. | For Max. Panel Thick. | For Mount. Hole Dia. | Lg. | Wd. | Ht. | For Use Outdoors | Specifications Met | Temp. Range, °F | Color | Pkg. Qty. | Pkg. | |
Nylon Plastic | |||||||||||||
| R | 3/8" | 0.090" | 0.19" | 5/8" | 1/4" | 13/16" | No | UL 94 V-2 | -40° to 185° | Off-White | 100 | 0000000 | 00000 |
| R | 5/8" | 0.090" | 0.19" | 5/8" | 1/4" | 1" | No | UL 94 V-2 | -40° to 185° | Off-White | 100 | 0000000 | 00000 |
| R | 11/16" | 0.090" | 0.19" | 5/8" | 1/4" | 1 3/8" | No | UL 94 V-2 | -40° to 185° | Off-White | 100 | 0000000 | 00000 |
| R | 3/4" | 0.090" | 0.19" | 5/8" | 1/4" | 1 1/4" | No | UL 94 V-2 | -40° to 185° | Off-White | 100 | 0000000 | 0000 |
| S | 3/8" | 0.340" | 0.19" | 7/8" | 3/16" | 1 1/8" | No | UL 94 V-2 | -40° to 185° | Off-White | 25 | 0000000 | 0000 |
| S | 1/2" | 0.340" | 0.19" | 7/8" | 3/16" | 1 1/8" | No | UL 94 V-2 | -40° to 185° | Off-White | 25 | 0000000 | 0000 |
| S | 1" | 0.340" | 0.25" | 1 1/2" | 3/8" | 1 5/8" | No | UL 94 V-2 | -40° to 185° | Off-White | 25 | 0000000 | 0000 |
| T | 3/4" | 0.110" | 0.25" | 1 1/2" | 3/4" | 1 3/8" | No | UL 94 V-2 | -40° to 185° | Off-White | 25 | 0000000 | 0000 |
| U | 1/8" | 0.080" | 0.19" | 9/16" | 1/4" | 1 1/8" | No | UL 94 V-2 | -40° to 185° | Off-White | 25 | 0000000 | 0000 |
| U | 3/8" | 0.080" | 0.19" | 9/16" | 1/4" | 1 7/16" | No | UL 94 V-2 | -40° to 185° | Off-White | 25 | 0000000 | 0000 |
| U | 1/2" | 0.080" | 0.19" | 9/16" | 1/4" | 1 9/16" | No | UL 94 V-2 | -40° to 185° | Off-White | 25 | 0000000 | 0000 |
Standoff-Style Cable Holders
These mounts create space between a bundle and surface.
For technical drawings and 3-D models, click on a part number.
Overall | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | For Max. No. of Bundles | For Max. Bundle Dia. | Base to Bundle Ht. | For Mount. Hole Dia. | For Panel Thick. | Lg. | Wd. | Ht. | For Use Outdoors | Specifications Met | Temp. Range, °F | Color | Pkg. Qty. | Pkg. | |
Nylon Plastic | |||||||||||||||
| B | 1 | 1/4" | 1" | 0.19" | 0.08" | 1/4" | 9/16" | 2 1/16" | No | UL 94 V-2 | -40° to 185° | Off-White | 25 | 000000 | 00000 |
| B | 1 | 5/8" | 5/8" | 0.19" | 0.08" | 1/4" | 9/16" | 2 1/16" | No | UL 94 V-2 | -40° to 185° | Off-White | 25 | 000000 | 0000 |
Mountable Cable Ties
Push-in mount ties fit into a drilled hole.
Narrow ties are highly flexible and conform to irregularly shaped material better than standard, wide, and extra-wide cable ties.
Standard ties balance flexibility and strength, making them good for most bundling applications.
| Lg. | For Max. Bundle Dia. | Breaking Strength, lbs. | Wd. | Thick. | For Max. Panel Thick. | For Mount. Hole Dia. | For Use Outdoors | Specifications Met | Temp. Range, °F | Pkg. Qty. | Pkg. | |
Off-White | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Narrow | ||||||||||||
| 4 1/2" | 0.87" | 18 | 0.10" | 0.04" | 0.093" | 0.187" | No | UL 94 V-2 | -75° to 185° | 10 | 0000000 | 00000 |
Standard | ||||||||||||
| 5" | 1" | 50 | 0.19" | 0.05" | 0.105" | 0.25" | No | __ | -75° to 185° | 5 | 0000000 | 0000 |
| 8" | 1 5/8" | 50 | 0.19" | 0.05" | 0.14" | 0.25" | No | UL 94 V-2 | 32° to 180° | 100 | 0000000 | 00000 |
| 8" | 1 3/4" | 50 | 0.19" | 0.05" | 0.105" | 0.25" | No | __ | -75° to 185° | 10 | 0000000 | 0000 |
| 8 1/2" | 2" | 50 | 0.20" | 0.04" | 0.08" | 0.252" | No | UL 94 HB | -40° to 230° | 10 | 0000000 | 00000 |
Black | ||||||||||||
Narrow | ||||||||||||
| 4 1/2" | 0.87" | 18 | 0.10" | 0.04" | 0.093" | 0.187" | Yes | UL 94 V-2 | -75° to 185° | 10 | 0000000 | 0000 |
Standard | ||||||||||||
| 5" | 1" | 50 | 0.19" | 0.05" | 0.105" | 0.25" | Yes | __ | -75° to 185° | 5 | 0000000 | 0000 |
| 8" | 1 3/4" | 50 | 0.19" | 0.05" | 0.105" | 0.25" | Yes | __ | -75° to 185° | 5 | 0000000 | 0000 |
| 8" | 2" | 50 | 0.18" | 0.05" | 0.28" | 0.25" | No | UL 94 V-2 | 32° to 180° | 25 | 0000000 | 00000 |
Shaft-Mount Retractors
Secure these retractors to a square arbor. Hang a tool or object overhead, pulling it down when you need it. Let go and the cable pulls it back up. Choose a load capacity that is sufficient for the total load you'll place on the retractor. This includes the tool plus any fittings, hose, or power cords.
Cable | For Shaft | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Max. Capacity, lbs. | Travel, ft. | Dia. | Material | Ht. When Retracted | Housing Material | Wd. | Shape | Each | |
| 2 | 10 1/4 | 3/32" | Plastic-Coated Steel | 3 3/8" | Steel | 5/16" | Square | 0000000 | 0000000 |
| 3.5 | 7 1/2 | 3/32" | Plastic-Coated Steel | 3 3/8" | Steel | 5/16" | Square | 0000000 | 000000 |
| 6 | 5 | 3/32" | Plastic-Coated Steel | 3 3/8" | Steel | 5/16" | Square | 0000000 | 000000 |
| 10 | 5 | 3/32" | Plastic-Coated Steel | 3 3/8" | Steel | 5/16" | Square | 0000000 | 000000 |
| 14 | 5 | 3/32" | Plastic-Coated Steel | 3 3/8" | Steel | 5/16" | Square | 0000000 | 000000 |
| 24 | 10 | 3/32" | Plastic-Coated Steel | 5" | Steel | 7/16" | Square | 0000000 | 000000 |
| 35 | 9 | 3/32" | Plastic-Coated Steel | 6" | Steel | 7/16" | Square | 0000000 | 000000 |