Carriers for Overhead Enclosed-Track Powered Conveyors
Carriers attach loads to the trolley chain with a scissor-like action and pivot as the conveyor makes elevation changes. Use where swinging loads are permitted.
For technical drawings and 3-D models, click on a part number.
Eye Dia. | |||||||||
---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | (A) | (B) | Max. Incline | Cap., lbs. | Material | Max. Temp., °F | Each | |
4 1/4" | 1" | 11/32" | 7/16" | 45° | 125 | Steel | 450° | 0000000 | 00000 |
Trolley Chain for Overhead Enclosed-Track Powered Conveyors
Carry loads along a track with this series of smooth rolling alternating vertical and horizontal wheels. Use a carrier to attach your load to the chain. Vertical wheel axles spaced every 8" serve as attachment points for carriers. Note: Capacity listed is per attachment point.
For technical drawings and 3-D models, click on a part number.
Lg., ft. | Cap. per Attachment Point, lbs. | Vertical Wheel Spacing | Material | Connecting Pin Material | Max. Temp., °F | Each | |
20 | 125 | 8" | Steel | Steel | 450° | 0000000 | 0000000 |
Trolleys for Overhead Enclosed-Track Manual Conveyors
Push to move material along the conveyor.
Height is measured from the bottom of the track to the center of the connection holes.
For technical drawings and 3-D models, click on a part number.
Material | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall Ht. | For Inside Track Wd. | Ht. | Wd. | Wheel Dia. | Eye Dia. | Cap., lbs. | Frame | Wheel | Bearing | Bearing Type | Max. Temp., °F | Each | |
4 9/16" | 2 1/2" | 1 1/2" | 6" | 2 1/4" | 17/32" | 250 | Iron | Steel | Steel | Ball | 450° | 0000000 | 000000 |
Trolleys for Powered Overhead Beam Conveyors
Use with conveying chain to automatically move these trolleys along the beam. The two-bolt bottom connection keeps the trolleys from loosening during use.
For technical drawings and 3-D models, click on a part number.
Track for Overhead Beam Conveyors
Track provides the runway for trolleys in manual and powered systems.
Note: Not designed for building structural support.
For technical drawings and 3-D models, click on a part number.
Chain for Powered Overhead Beam Conveyors
Chain connects trolleys and guides movement along the track. It can be assembled and disassembled without tools, yet its design makes it difficult to disconnect while in use.
For technical drawings and 3-D models, click on a part number.
Trolleys for Manual Overhead Beam Conveyors
Prevent excess wear on the track and trolley—only the wheels of these push trolleys come in contact with the beam. Trolleys can be installed anywhere along the beam.
For technical drawings and 3-D models, click on a part number.