For protection from more than just falling objects, these hard hats are rated ANSI/ISEA Z89.1, Type II to deflect both top and off-center blows to the head. They’re also classified as Class E, which means they are tested at 20,000 volts for electrical insulation. To prevent perspiration from getting into your eyes, all have a sweatband. Use the mounting slots to attach face shields and earmuffs (not included).

Hard hats come with four- or eight-point suspensions—the more suspension points, the better the hard hat distributes the force of impact. For comfort and a secure fit, adjust pinlock suspensions with the interlocking straps; adjust the ratchet suspensions with an easy-to-turn knob.

Hard hats with a three-point chin strap keep hats securely on your head, even when working upside down.

Made from a material similar to that used in firefighters' helmets.

Hard hats are Type I, Class E, meaning they protect against blows to the top of the head only and are proof-tested at 20,000 volts.

Pinlock suspensions adjust with interlocking straps. Ratchet suspensions adjust with an easy-turn knob.

These hard hats give all-in-one head, face, and ear protection. Lift the face shield and earmuffs when not in use.

Hard hats are Type I, Class E, meaning they protect against blows to the top of the head only and are proof-tested at 20,000 volts. They have a ratchet suspension that adjusts with an easy-turn knob.

Protect your head from minor bumps and scrapes. All have a pinlock suspension that adjusts with interlocking straps.

Protect your head from minor bumps and scrapes. Attach a face shield lens (sold separately) to protect against dust and spray. All have a pinlock suspension that adjusts with interlocking straps.

Provide protection from low-level arc flash hazards when a full hood is not necessary. These face shields meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. Meets ANSI/ISEA Z87.1 basic-impact standards when worn with safety glasses or goggles. The chin guard offers added protection. Hard hats have a ratchet adjustment with an easy-turn knob.

For protection from low-level arc flash hazards, these kits include several of the necessary safety items in a storage bag. All contents meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. All hard hats have a ratchet adjustment with an easy-turn knob.

Style A kits come with a hard hat, face shield, hood, safety glasses, and storage bag.

Style B kits come with coveralls, hard hat, face shield, hood, safety glasses, and two storage bags.When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under the coveralls.