Drop these headlamps in water and they’ll still work—they’re IP rated to withstand submersion for at least 30 minutes. Use them to shine light on your work while keeping your hands free. All can cast either a spot beam with a bright center for long distances, or a uniform flood beam for close-up tasks and inspection work. These headlamps are tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Styles A and B can be used as a flashlight—just snap them out of the strap. Wrap them around a hard hat with their rubber-coated elastic strap, or attach them with the included clips. The strap is reflective, so drivers will see you. These headlamps have a battery life indicator to let you know when to recharge. If you need these headlamps to work right away and can’t wait for them to charge, you can use disposable batteries instead of their rechargeable one. Style A works with two CR123 batteries. Style B works with three AAA batteries.

Style C fit on a welding helmet or hard hat without weighing down the front of your head. The battery pack is in the back to balance the weight. You can also hang the pack off your belt by adding the included extension cable. To connect these headlamps to a welding helmet, use the included snap-together fasteners. To wrap around a hard hat, attach the rubber strap—no clips required. A battery life indicator lets you know when to recharge.

Style D run on disposable alkaline batteries, but you can swap them out with lithium batteries to get brighter light in cold conditions. A lockout feature stops them from getting turned on by accident. Snap them onto a welding helmet with the included fasteners. They’ll also fit around a hard hat with no need for clips—just use the included rubber strap.

On headlamps with color options, the green beam shows more contrast than the red beam, but it can interfere with your ability to see in dark conditions. The red beam lets you see in low light without disrupting your night vision.

IP68-rated headlamps can be submerged in water for more than 30 minutes. They’re also sealed against dust.

Light up work while staying visible in high-risk areas. These headlamps have LEDs on the head band so forklift and truck drivers can see you. You can set the lights to shine steady or flash. These headlamps are tested against ANSI/Plato FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Styles A and B have lights all around the head band for 360° visibility. You can turn the front and band light on separately or simultaneously. Battery life is measured when all lights are on. They include a rubber strap you can wrap around a hard hat—no hard hat clips required. These headlamps are rated for temporary submersion in water.

Style A have a memory function that defaults to your preferred light combination when you first turn them on.

Style B headlamps will last a full shift. Quickly swap out their disposable batteries—no need to wait for a charge. Their reflective band keeps you visible to vehicles even when the light is turned off.

Style C are a lower cost alternative that has a red light in back so people can see you when it is dark. However, they don’t have lights all around the head band. The front light has a dial to dim the light anywhere from high to low for precise lighting control. They are a good choice for wearing on your head rather than on a hard hat. Rated IP54, they’re sealed against dust and splashing water.

Headlamps with a spot beam have a bright center for lighting up long distances. Headlamps with a flood beam cast a uniform spread of light that’s good for close-up tasks and inspection work.

On headlamps with color options, the red beam lets you see in low light without disrupting your night vision. The green beam shows more contrast than the red beam, but it can interfere with your ability to see in dark conditions.

Light up work even when your visor is up. These headlamps come with three attachments that fit with anything from your hard hat to your baseball cap. A strong magnet connects the light to the attachments, so swap between them in a snap. When you need close-up illumination, detach the light and hold it as a task light.

Rated IP54, these headlamps are sealed against dust and splashing liquids. They’re tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as brightness, battery life, and beam distance. On the high beam, these lamps will illuminate the length of a football field.

Twist the head to adjust from a narrow spotlight to a wide floodlight. These headlamps are rechargeable and include a spare rechargeable battery. If you aren’t near an outlet or you can’t wait for a recharge, they’ll also run on three disposable AAA batteries.

Clip these headlamps right into a mount on your tactical or rescue helmet. You can also clip them onto your gear’s MOLLE strap. These headlamps all have multiple LED color options for different scenarios. Use the red or blue beam in low-light environments to preserve your night vision. The blue beam lets you see more details and color differences than the red beam—you can even read. The green beam shows more contrast than red and blue beams, but it can interfere with your ability to see in dark conditions. Meeting ANSI/Plato F1, these lights have been tested for light output, impact resistance, and run time.

Style A are best for close-up tasks and inspection work—they produce a flood beam with an even spread of light. Direct the light where you need it with the bendable arm. You can program the order the beam colors appear with each push of the button based on your preference. Rated IP04, these headlamps are sealed to keep out dripping, splashing, and falling liquids, as well as humidity. They include common helmet mount adapters such as ARC, M-LOK, MICH, Picatinny, and ABR.

Style B are best for lighting up long distances where water is a concern. Our most water-resistant option, they’re rated IP08 to handle prolonged submersion. Their spot beam has a bright center to illuminate faraway objects. When wearing night-vision goggles, switch these headlamps to infrared light to see clear, crisp images in dim light or pitch black. You can also program the order that the beam colors appear with each push of a button based on your preference. Bend the arm to direct light where you need it. To keep them from turning on accidentally, they have a digital lockout option. These headlamps include common helmet mount adapters such as ARC, M-LOK, MICH, Picatinny, and ABR.

Style C project light the farthest of these headlamps. Tilt them up to 90° to point light where you need it. To view clear images through night-vision goggles in dim light or pitch black, switch them to infrared light. A digital lockout option keeps the beam from turning on accidentally. IP07-rated for temporary submersion, they’ll keep working if you drop them in water. These headlamps are compatible with NVG mounts and include a strap if you want to wear them without a helmet.

Attach mini and full-size flashlights to a hard hat and keep your hands free for work. Mount the clip to the brim or insert it into the slot on the side of a hard hat.

Clip these little flashlights to a baseball cap or a surface to light up your work. They cast a flood beam with a uniform spread of light that’s ideal for close-up tasks.

Styles A-D can clip onto the brim of a hat. These flashlights are also tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Style A come with an elastic band, so you can wear them as a headlamp.

On flashlights with color options, the green beam shows more contrast than the red beam, but it can interfere with your ability to see in dark conditions. The red beam lets you see in low light without disrupting your night vision.

IP04- and IP54-rated flashlights are sealed to keep out dripping, splashing, and falling liquids, as well as humidity.

Clip these little flashlights to any surface up to 1/2” thick and keep your hands free for work. They’re rated for use in environments where ignitable concentrations of flammable or combustible gases, vapors, and liquids are present. They're intrinsically safe for NEC Class I, Division I Groups A, B, C, and D hazardous locations. This means they won't ignite an explosion. With long-lasting, built-in LEDs, they’re more efficient and generate less heat than flashlights with other light technologies. These flashlights cast a spot beam that is bright at the center for long-distance illumination.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Light up your work from under your brim. These lights clip onto the rim of a cap or hard hat to keep your hands free from holding a flashlight. They have LED bulbs, which are brighter and less hot than incandescent and halogen bulbs. You can adjust how many lights you have on—one, three, or all five. Or you can set the lights to flash.

Wear a flashlight around your neck to keep your hands free. These lights are great when you need to wear a brimmed hat or other head gear that would interfere with a headlamp. Bend and angle the adjustable arms and they’ll stay in place. You can also wrap them around nearby objects and point them where you need light. They flood the area with a uniform beam, which is particularly good for up-close and inspection tasks.

Make inspecting fine details easier—LED lights on these magnifiers emit a focused, even beam that is ideal for detailed work. These magnifiers are designed to fit over your prescription or safety glasses. Made from acrylic, their lenses are lightweight and shatterproof.

Magnifiers with three lenses let you use a base lens with two other built-in lenses in different combinations for a total of four magnification levels.