Shoes that cannot be sold outside of the United States are restricted due to product regulations.

These covers are ASTM F2413 rated and tested to 20,000 volts AC for protection against electrical hazards. They are made of water-resistant dielectric rubber with a fabric lining for easy removal. A skid-resistant sole grips wet and slippery surfaces for good traction. They have a deep-cut heel that locks onto ladder rungs or stair edges to stabilize the wearer when climbing.

Order your normal shoe size unless wearing over large work shoes, then order one size up.

These covers are ASTM F2413 rated and tested to 20,000 volts AC for protection against electrical hazards. They are knee high and made of water-resistant dielectric rubber with a fabric lining for easy removal. A skid-resistant sole grips wet and slippery surfaces for good traction. They have a deep-cut heel that locks onto ladder rungs or stair edges to stabilize the wearer when climbing. Tighten the top using the adjustable strap.

Order your normal boot size unless wearing over large work boots, then order one size up.

Keep boots clean and protected in wet, dirty environments. A skid-resistant sole grips dry and wet surfaces for good traction.

Covers with snaps allow you to tighten the top with a snap. These covers are made of PVC to hold up in wet environments. Order your normal boot size unless wearing over large work boots, then order one size up.

Covers with snaps and a buckle have an adjustable strap. Tighten the strap to secure over boots. These covers are made of PVC to hold up in wet environments. Order one size up from your normal boot size.

Covers with buckles can adjust to fit multiple types of shoes. Made of blended rubber, these covers are water and abrasion resistant. 11" high covers reach mid-calf. 14" high covers are knee high.

Keep shoes clean and protected in wet, dirty environments. A skid-resistant sole grips wet and slippery surfaces for good traction.

Style A fit over athletic and work shoes.

Style B provide more coverage than Style A.

Style C have buckles to accommodate multiple types of shoes and a deep interior for shoes with a heel. They have a deep hex-tread sole for added traction.

Order your normal shoe size unless wearing over large work shoes, then order one size up.

These lightweight covers protect boots from dirt and grime.

Tyvek polyethylene provides better tear and abrasion resistance than polypropylene and polyethylene. It holds up to occasional contact with nonhazardous liquids, such as water and paint spray. It is made of heat- and pressure-bonded fibers for a material that’s soft yet strong.

Latex is a thick, sturdy rubber that holds its form better than fabric and plastic boot covers. It resists liquid splashes.

12" and 13" high covers reach mid-calf. 18" high covers are knee high.

Covers with a skid-resistant sole grip wet and slippery surfaces for good traction.

Designed to meet clean room standards, these boot covers act as a barrier between the worker and the room to prevent pollutants such as dust particles and microbes from contaminating a space. Covers are suitable for use in clean rooms rated to both Federal Standard and ISO classes. In both systems, clean rooms with lower class ratings have fewer contaminants. These covers are knee high with an elastic top and an ankle closure. A skid-resistant sole grips wet and slippery surfaces for good traction.

Tyvek polyethylene covers are soft and strong, and withstand occasional contact with mild liquids such as water and spray paint. These covers are disposable.

Polyester covers resist abrasion and splashing liquid; they’ll last longer than Tyvek polyethylene covers. These covers must be cleaned prior to first use, and are reusable for up to 100 washes when laundered to clean room standards. They have a hard rubber sole, so they can be worn without shoes.

Studs dig in and hold tight on icy surfaces.

Ice grippers with heel coverage leave the front of shoes bare, so users can climb ladders safely and operate machinery without damaging the pedals. The adjustable strap secures these grippers to shoes. They have four steel studs on each foot.

Ice grippers with full shoe coverage have studs on the toe and heel to give wearers complete traction for walking.

Slip-on grippers are made of flexible rubber or plastic that stretches to fit over shoes. They have six steel studs or eight tungsten carbide studs on each foot. Grippers with tungsten carbide studs are more durable and harder to dull than those with steel studs. They also give you more stability because they have a greater number of studs. If one of the studs breaks or goes missing, there’s a replacement stud built into the upper toe area for a quick swap. To help you handle thick snow conditions, these grippers have treaded soles for extra traction. They remain elastic even in cold temperatures, so you can stretch them over shoes using their pull tabs without cracking or breaking them.

Grippers with hook and loop straps provide a snug fit over shoes or bulky boots. They have 15 steel studs on each foot to provide better traction than slip-on grippers. Studs are replaceable.

When ordering ice grippers, order your normal shoe size.