Designed for temporary mounting on smooth, nonporous surfaces, vacuum holders are easy to remove and reposition.

These hooks are often used to hang coats and other lightweight items.

Attach these general purpose hooks to steel walls, cabinets, and other magnetic surfaces.

With capacities up to 2,000 lbs., these all-metal pegboards are stronger and more durable than hardboard and plastic pegboards.

Often used to mount mirrors, these hangers hold up to 40 lbs.

Machine these jaws to fit the curves and edges of your unique workpiece for a tighter hold and more stability than standard hardened jaws.

These pans have 1/8” diameter perforations on the sides and bottom to allow drainage and air flow.

Stronger and with greater load capacities than gooseneck-style positioning arms, these arms keep their shape even when moving or when exposed to vibration. They’re often used in robotics and conveyor applications when frequent repositioning isn’t required.

Ball-and-socket connections allow 360° positioning.

A suction base makes it easy to move and attach these arms to smooth surfaces such as glass and polished metal.

Reduce hand fatigue in continuous fastening and grinding applications. Arms are counterbalanced to support the full weight of the tool as well as absorb torque.

These clamps completely surround single lines of pipe, tubing, and conduit while holding them close to the mounting surface.

Mount these general purpose U-bolts into an existing bracket, or combine with a mounting plate for a secure hold at the mounting surface.

Clamp onto metal tubes such as pipe, scaffolding, and railing to hang lighting fixtures, threaded rod, and equipment.

Save time when wiring connections in a junction box; these blocks come already installed in an enclosure.

These enclosures have thicker walls than standard aluminum enclosures, but are still a lightweight yet durable alternative to stainless steel.

These enclosures have internal slots to hold circuit boards in place.

Made of aluminum, these enclosures resist corrosion from rain, sleet, and snow. While not as corrosion resistant as stainless steel, aluminum is lighter for better mobility, and also easier to machine for custom mounting.

Choose a body and two matching end caps to make your own dust-tight or watertight enclosure.

For use in hazardous locations, these enclosures are rated NEMA 7 and 9 and meet UL Class I, Divisions 1 and 2, Groups B, C, and D; Class II, Divisions 1 and 2, Groups E, F, and G; and Class III, Divisions 1 and 2.

Lighter than stainless steel yet durable, these aluminum enclosures protect electronics from frequent washdowns and withstand periodic submersion in water.

These enclosures shield electrical components from water, so they’re safe to install onto DIN rail in wet and washdown environments.

Mount these shelves in standard electronics cabinets that are 19 in. wide to hold components that cannot fit directly to the enclosure.

Use these clips to secure batteries in a housing.

Slide a sign into the side of these holders.

These holders come with a cover to protect signs from smudging and wear.

Bolt these pegs directly into the ground.

Loop these rings onto tags.

Specify a starting number.

Identify equipment by engraving or stamping one of these sturdy metal tags and hanging it with a wire.

Metal tags are more durable than plastic tags.

Also known as vacuum chucks, these plates secure thin and flexible parts that can’t be held with vises or clamps for milling, drilling, routing, and finishing operations. Connect the system to your shop’s compressed air supply and it's ready to use.

Place over the jaws and tighten the screws to securely attach liners.

Insert these one-piece grooved liners between vise jaws to hold small-diameter material vertically.

Mount using the holes in the base.

Machine these fixture clamps to match the contours of your workpieces for a stronger grip. Place the clamp between the two workpieces in a fixture and tighten the screw to extend the sides of the clamp, creating a secure hold against both workpieces.

The T-nut base secures the workstop into the slots of a machine table for positioning parts that extend beyond the jaws of your vise.

Get a firm grip on beakers and other containers in the curved jaws. You can also use the tips of these tongs to pick up small objects.

View, grab, and position objects in hard-to-reach spots. These retrievers have a camera and light at the tip of the flexible shaft and an LCD that displays live video. In addition to picking up objects, they can be used in applications such as installing wiring behind walls and extracting clogs and debris from pipes.

An LED lights the wire jaws and the shaft bends to reach objects in awkward spaces.

Pick up objects on the ground, grab items on high shelves, and reach into deep tanks.

LEDs light the magnetized tip for picking up small steel objects in dark areas. Pivot the head to access material from any angle.

The head pivots, so you can pick up screws, nuts, bolts, and other small steel objects from any angle.

The pointed tip with curved hook is good for holding and pulling cylindrical material.

Slip the cable over an object and it locks in place once tightened.

These plates have three T-slots for use with T-slot nuts, bolts, and setup studs.

Use these components in coordinate measuring machine (CMM) applications to raise a workpiece and reliably position it on a fixture plate with ¼"-20 holes.

Mount these versatile blocks to any flat surface for machine table-style T-slot clamping. They can also be used on a machine table to clamp parts at specific angles or add more total clamping points.

Use multiple fixtures to create a workholding system capable of clamping and unclamping multiple parts with the push of a button.