We will reply to your message within an hour.
Hold your smallest workpieces in these vises, which have a clamp-on base for quick installation and removal from a benchtop.
Quickly install and remove the clamp-on base from a benchtop.
Keep parts in position for machining by mounting these workstops to your vise jaws.
Designed for precision grinding and inspection, the construction of these vises ensures workpieces are held perfectly square. They are also known as toolmakers’ vises.
The base and three sides of the vise are ground flat, enabling mounting on its base, either side, or upright.
Secure these holders to a table or benchtop and slide in up to three pairs of locking pliers to create a hands-free way to hold your work.
Attached to an arm you can flex into position, these clamps hold objects such as a flashlight, tool, or instructions.
Free up a hand while using your Dremel on a workpiece.
Route bundles of wire and cable through a single hook. A wide opening allows access for installation, adjustment, and removal.
Attach these clamps to the flange of an beam, then hang a threaded rod from the threaded hole.
Also known as purlin clamps, these clamps are shaped to fit around beams that have a 45° or 90° lip.
These clamps rotate 360° and pivot 45° to ensure the rod hangs straight, even on sloped beams.
For centered load distribution, these clamps grip both sides of the beam and hang threaded rod from the middle.
Suspend material at any angle from the beam. Clamps have a fixed jaw that secures to the beam and a hanger that swivels 360° to position material and accommodate for misalignment.
These clamps have a fixed hanger for rigid connections.
Add a crossbeam for hanging lifting equipment, creating overhead conveyor systems, and supporting structural applications.
Join two beams in a straight line.
Support strut channel at a right angle to the beam.
A secure way to hang threaded rod from a pair of angles, such as those used in ceiling joists, without the need to drill or weld. These clamps are commonly used to suspend HVAC, conveyor, and other overhead systems.
Clamp to both sides of a beam to add an anchor point for hoists and other overhead equipment.
Clamp onto metal tubes such as pipe, scaffolding, and railing to hang lighting fixtures, threaded rod, and equipment.
Ball-and-socket connections allow 360° positioning.
Heavy duty construction adds strength for higher load capacities than other positioning arms.
Brackets are sized to mount sensors and reflectors to a conveyor frame.
Clamp around a pipe or tube to guide rope.
Designed for specific robot models, these kits have all of the parts required to create a cable and hose carrier. Use them to organize and protect cable and hose without obstructing your robot’s movement.
Use these accessories to mount carriers to your machinery without creating an obstruction.
Clamp these brackets onto a rod or tubing that's up to 3/4" in diameter.