Mount Type Mount Type | Show |
|---|
|
Mount Type Mount Type | Hide |
|---|
Thread Size Thread Size |
|---|
Material Material |
|---|
|
Height Height |
|---|
Mounting Hole Thread Size Mounting Hole Thread Size |
|---|
|
|
|
Tip Material Tip Material |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Serration Type Serration Type |
|---|
|
Handle Material Handle Material |
|---|
|
Load Capacity Load Capacity |
|---|
Maximum Clamping Force Maximum Clamping Force |
|---|
|
|
Handle Finish Handle Finish |
|---|
|
Ball-Grip Positioning Arms
Ball-and-socket connections allow 360° positioning. Choose a complete arm or select a base, connectors, and a plate, grip, holder, or tray to build a complete arm.
For technical drawings and 3-D models, click on a part number.
Mount. Holes | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mount. Location | Ht. | Ball Dia. | Max. Load Capacity, lbs. | Material | Ball Material | Base Dia. | No. of | Pipe Size | Thread Type | Each | |
| Pipe | 3 1/4" | 1 1/2" | 10 | Aluminum | Rubber | 1 1/4" | 1 | 1/2 | NPT | 00000000 | 000000 |
Swiveling Tips for Screws and Threaded Studs
Attach to the end of a screw or threaded stud to apply uniform pressure on uneven and angled surfaces. Also known as toggle and swivel-foot pads.
For technical drawings and 3-D models, click on a part number.
| Dia. | Ht. | Load Capacity, lbs. | Thread Size | Range of Motion | Each | |
Steel | ||||||
|---|---|---|---|---|---|---|
| 1/2" | 5/8" | 360 | 10-32 | 20° | 0000000 | 000000 |
| 5/8" | 5/8" | 3,900 | 1/4"-20 | 10° | 0000000 | 0000 |
| 11/16" | 3/4" | 5,900 | 5/16"-18 | 10° | 0000000 | 0000 |
| 3/4" | 13/16" | 6,400 | 3/8"-16 | 10° | 0000000 | 0000 |
| 7/8" | 15/16" | 7,000 | 1/2"-13 | 10° | 0000000 | 0000 |
| 1" | 1" | 10,000 | 5/8"-11 | 10° | 0000000 | 0000 |
| 1 1/4" | 1 3/8" | 13,500 | 3/4"-10 | 10° | 0000000 | 0000 |
| 1 5/8" | 1 13/16" | 18,750 | 1"-8 | 10° | 0000000 | 00000 |
| 13mm | 16.5mm | 360 | M5 | 20° | 0000000 | 00000 |
| 13mm | 16.5mm | 520 | M6 | 20° | 0000000 | 00000 |
| 16mm | 21mm | 930 | M8 | 20° | 0000000 | 00000 |
| 19mm | 23mm | 1,455 | M10 | 20° | 0000000 | 00000 |
| 22mm | 25.5mm | 1,870 | M12 | 20° | 0000000 | 00000 |
| 25mm | 29.5mm | 3,130 | M16 | 20° | 0000000 | 00000 |
| 32mm | 36mm | 4,720 | M20 | 20° | 0000000 | 00000 |
Stainless Steel | ||||||
| 5/8" | 5/8" | 3,900 | 1/4"-20 | 10° | 0000000 | 0000 |
| 11/16" | 3/4" | 5,900 | 5/16"-18 | 10° | 0000000 | 0000 |
| 3/4" | 13/16" | 6,400 | 3/8"-16 | 10° | 0000000 | 0000 |
| 7/8" | 15/16" | 7,000 | 1/2"-13 | 10° | 0000000 | 00000 |
| 1" | 1" | 10,000 | 5/8"-11 | 10° | 0000000 | 00000 |
| 1 1/4" | 1 3/8" | 13,500 | 3/4"-10 | 10° | 0000000 | 00000 |
| 1 5/8" | 1 13/16" | 18,750 | 1"-8 | 10° | 0000000 | 00000 |
Swiveling Gripper Tips for Screws and Threaded Studs
Attach to the end of a screw or threaded stud—the serrated face swivels to grip uneven and angled surfaces. Also known as toggle and swivel-foot pads.
For technical drawings and 3-D models, click on a part number.
| Dia. | Ht. | Load Capacity, lbs. | Range of Motion | Mounting Hole Thread Size | Each | |
Steel | ||||||
|---|---|---|---|---|---|---|
| 5/8" | 5/8" | 3,900 | 10° | 1/4"-20 | 0000000 | 00000 |
| 11/16" | 3/4" | 5,900 | 10° | 5/16"-18 | 0000000 | 0000 |
| 3/4" | 13/16" | 6,400 | 10° | 3/8"-16 | 0000000 | 0000 |
| 7/8" | 15/16" | 7,000 | 10° | 1/2"-13 | 0000000 | 0000 |
| 1" | 1" | 10,000 | 10° | 5/8"-11 | 0000000 | 0000 |
| 1 1/4" | 1 3/8" | 13,500 | 10° | 3/4"-10 | 0000000 | 0000 |
| 1 5/8" | 1 13/16" | 18,750 | 10° | 1"-8 | 0000000 | 00000 |
Stainless Steel | ||||||
| 5/8" | 5/8" | 5,000 | 10° | 1/4"-20 | 00000000 | 0000 |
| 11/16" | 3/4" | 7,600 | 10° | 5/16"-18 | 00000000 | 0000 |
| 3/4" | 13/16" | 8,250 | 10° | 3/8"-16 | 00000000 | 0000 |
| 7/8" | 15/16" | 9,000 | 10° | 1/2"-13 | 00000000 | 00000 |
| 1" | 1" | 12,900 | 10° | 5/8"-11 | 00000000 | 00000 |
| 1 1/4" | 1 3/8" | 17,400 | 10° | 3/4"-10 | 00000000 | 00000 |
| 1 5/8" | 1 13/16" | 24,200 | 10° | 1"-8 | 00000000 | 00000 |
Nonmarring Swiveling Tips for Screws and Threaded Studs
The contact area is covered in plastic to protect soft metal and polished surfaces. Attach these tips to the end of a screw or threaded stud to apply uniform pressure on uneven and angled surfaces. Also known as toggle and swivel-foot pads.
For technical drawings and 3-D models, click on a part number.
| Dia. | Ht. | Load Capacity, lbs. | Thread Size | Range of Motion | Tip Material | Each | |
Steel | |||||||
|---|---|---|---|---|---|---|---|
| 5/8" | 5/8" | 3,900 | 1/4"-20 | 10° | Acetal Plastic | 00000000 | 00000 |
| 11/16" | 3/4" | 5,900 | 5/16"-18 | 10° | Acetal Plastic | 00000000 | 0000 |
| 3/4" | 13/16" | 6,400 | 3/8"-16 | 10° | Acetal Plastic | 00000000 | 0000 |
| 7/8" | 15/16" | 7,000 | 1/2"-13 | 10° | Acetal Plastic | 00000000 | 0000 |
| 1" | 1" | 10,000 | 5/8"-11 | 10° | Acetal Plastic | 00000000 | 0000 |
| 1 1/4" | 1 3/8" | 13,500 | 3/4"-10 | 10° | Acetal Plastic | 00000000 | 0000 |
| 1 5/8" | 1 13/16" | 18,750 | 1"-8 | 10° | Acetal Plastic | 00000000 | 00000 |
Stainless Steel | |||||||
| 5/8" | 5/8" | 3,900 | 1/4"-20 | 10° | Acetal Plastic | 0000000 | 00000 |
| 11/16" | 3/4" | 5,900 | 5/16"-18 | 10° | Acetal Plastic | 0000000 | 00000 |
| 3/4" | 13/16" | 6,400 | 3/8"-16 | 10° | Acetal Plastic | 00000000 | 00000 |
| 7/8" | 15/16" | 7,000 | 1/2"-13 | 10° | Acetal Plastic | 00000000 | 00000 |
| 1" | 1" | 10,000 | 5/8"-11 | 10° | Acetal Plastic | 00000000 | 00000 |
| 1 1/4" | 1 3/8" | 13,500 | 3/4"-10 | 10° | Acetal Plastic | 00000000 | 00000 |
| 1 5/8" | 1 13/16" | 18,750 | 1"-8 | 10° | Acetal Plastic | 00000000 | 00000 |
Tooling Balls
The shoulder on these tooling balls provides a consistent height reference point. Use the ball as a point from which any other point can be precisely measured, such as when determining hole centerlines and distances between hole centerlines.
Slip-fit tooling balls have a slightly undersized shank for temporary mounting. Secure from the side with a set screw (not included).
Tooling balls with a threaded hole secure from the bottom by threading a cap screw (not included) into the shank.
Two-piece tooling balls are welded to the shank. If excessive horizontal pressure is applied to the ball it will break off to prevent bending the shank or distorting the tight tolerances of the ball.
For technical drawings and 3-D models, click on a part number.
Mounting Hole | Slip Fit and Threaded Hole | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Ball Dia. | Shank Dia. | Shoulder-to-Ball-Ctr. Lg. (A) | Shank-to-Ball-Ctr. Lg. (B) | Lg. (C) | Thread Size | Thread Lg. | Mounting Fasteners Included | Material | Each | |
One Piece | ||||||||||
| 1/2" | 1/4" | 5/16" | 5/8" | 0.56" | 6-32 | 1/4" | No | Steel | 00000000 | 000000 |
| 12mm | 6mm | 12mm | 22mm | 18mm | 6-32 | 1/4" | No | Steel | 000000000 | 00000 |
Two Piece | ||||||||||
| 1/2" | 1/4" | 5/16" | 5/8" | 0.56" | 6-32 | 1/4" | No | Steel | 0000000 | 00000 |
| 1/2" | 1/4" | 1/2" | 7/8" | 0.75" | 6-32 | 1/4" | No | Steel | 0000000 | 00000 |
| Tooling Ball Cover for 1/4"-7/8" Ball Dia. | 0000000 | Each | 00000 |
Angled Grippers
Angled 15°, the serrated face of these grippers penetrates uneven or irregularly shaped parts. They can be embedded in fixtures or used in the jaws of lathe chucks. Mount grippers from the bottom using a socket head cap screw.
For technical drawings and 3-D models, click on a part number.
Grippers
Maintain a secure hold on uneven or irregularly shaped parts by clamping against these serrated grippers.
Grippers with a threaded through-hole/set screw notch mount from the bottom with a socket head cap screw or from the side using a set screw.
Grippers with a threaded through-hole mount from the bottom with a socket head cap screw.
Fine serrations penetrate the workpiece for aggressive holding.
Extra-fine serrations are closer together for less penetration and a lighter hold on the workpiece.
For technical drawings and 3-D models, click on a part number.
Through Hole/Set
Screw Notch
| Dia. | Ht. | Mounting Hole Thread Size | Mounting Fasteners Included | Notch Ht. | Material | Choose a Serration Type | Each | |
| 3/8" | 3/8" | 10-32 | No | 3/16" | Steel | Extra Fine | 00000000 | 00000 |
| 1/2" | 3/8" | 10-32 | No | 3/16" | Steel | 00000000 | 0000 | |
| 1/2" | 1/2" | 10-32 | No | 3/16" | Steel | 00000000 | 0000 | |
| 5/8" | 3/8" | 1/4"-28 | No | 3/16" | Steel | 00000000 | 00000 | |
| 3/4" | 3/8" | 1/4"-28 | No | 3/16" | Steel | 00000000 | 00000 | |
| 1" | 3/8" | 1/4"-28 | No | 3/16" | Steel | 00000000 | 00000 |
| Dia. | Ht. | Mounting Hole Thread Size | Mounting Fasteners Included | Notch Ht. | Material | Choose a Serration Type | Each | |
| 3/8" | 3/8" | 10-32 | No | 3/16" | Carbide-Tipped Steel | Extra Fine | 00000000 | 00000 |
| 1/2" | 3/8" | 10-32 | No | 3/16" | Carbide-Tipped Steel | 00000000 | 0000 | |
| 1/2" | 1/2" | 10-32 | No | 3/16" | Carbide-Tipped Steel | 00000000 | 0000 | |
| 5/8" | 3/8" | 1/4"-28 | No | 3/16" | Carbide-Tipped Steel | 00000000 | 00000 | |
| 3/4" | 3/8" | 1/4"-28 | No | 3/16" | Carbide-Tipped Steel | 00000000 | 00000 | |
| 1" | 3/8" | 1/4"-28 | No | 3/16" | Carbide-Tipped Steel | 00000000 | 00000 |
Part Presentation Stands
For technical drawings and 3-D models, click on a part number.
Use pegs to create custom layouts on part presentation plates with peg holes. Each peg comes with a screw. Thread the screw through the peg hole from the back of the plate to mount the peg to the front of the plate. Another peg can be stacked on top of the mounted peg to support tall parts.
Overall | Mounting | |||||
|---|---|---|---|---|---|---|
| Length | Width | Stackable | Type | Fasteners Included | Each | |
Aluminum | ||||||
| 1 1/8" | 3/8" | Yes | Threaded Insert | Yes | 0000000 | 00000 |
Adjustable-Height Positioning Stands
11-lb. capacity stands have an open head for use with optical and laser plumb instruments. The pointed feet provide stability on grass, gravel, and dirt.
150-lb. capacity stands can be staked through the holes in the footplates.
| Max. Load Capacity, lbs. | Ht. | Head Dia. | Material | Mount Type | No. of Mounting Holes (Thread Size) | Mounting Fasteners Included | Features | Each | |
| 11 | 42"-65" | 5" | Aluminum | Threaded Hole | 1 (5/8"-11) | No | Open Head, Pointed Feet with Rubber Pads | 0000000 | 000000 |
| 150 | 33 1/2"-70" | 6" | Powder-Coated Aluminum | Threaded Hole | 4 (1/4"-20),12 (5/16"-18) | Yes | 4" Dia. Self-Leveling Footplates with 5/8" Hole | 000000 | 00000000 |
Cam Handles
Use these standard cam handles for most clamping applications. Push down on the handle and the head applies pressure to quickly draw two parts together for fast adjustments. Clamping distance is how far the handle will draw parts together when clamped.
Threaded-hole handles install on a threaded stud.
Aluminum handles have mild corrosion resistance, are lightweight, and are nonmagnetic.
For technical drawings and 3-D models, click on a part number.
Thread | Handle | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Clamping Distance | Lg. | Wd. | Center Ht. | Clamped Ht. | Max. Clamping Force, lbs. | Washer Material | Thrust Washer Material | Each | |
Black Powder-Coated Aluminum | |||||||||||
| 6-32 | __ | 3/64" | 1 3/8" | 7/16" | 3/8" | 1/2" | 325 | Steel | Plastic | 0000000 | 000000 |
| 8-32 | __ | 3/64" | 2" | 1/2" | 7/16" | 5/8" | 550 | Steel | Plastic | 0000000 | 00000 |
| 10-24 | __ | 3/64" | 2" | 1/2" | 7/16" | 5/8" | 550 | Steel | Plastic | 0000000 | 00000 |
| 10-32 | __ | 3/64" | 2 3/4" | 9/16" | 9/16" | 7/8" | 875 | Steel | Plastic | 0000000 | 00000 |
| 1/4"-20 | __ | 3/64" | 2 3/4" | 9/16" | 9/16" | 7/8" | 875 | Steel | Plastic | 0000000 | 00000 |
| 5/16"-18 | __ | 1/16" | 3 3/4" | 15/16" | 11/16" | 1 1/8" | 1,775 | Steel | Plastic | 0000000 | 00000 |
| M3 | 0.5 | 1.2mm | 36mm | 12mm | 9mm | 13mm | 325 | Steel | Plastic | 0000000 | 00000 |
| M4 | 0.7 | 1.2mm | 52mm | 13mm | 11mm | 17mm | 550 | Steel | Plastic | 0000000 | 00000 |
| M5 | 0.8 | 1.2mm | 70mm | 15mm | 15mm | 22mm | 875 | Steel | Plastic | 0000000 | 00000 |
| M6 | 1 | 1.2mm | 70mm | 15mm | 15mm | 22mm | 875 | Steel | Plastic | 0000000 | 00000 |
| M8 | 1.25 | 1.6mm | 96mm | 24mm | 18mm | 29mm | 1,775 | Steel | Plastic | 0000000 | 00000 |