About Measuring Hose and Tube Clamps
What's the best way to determine the clamp size you'll need? Simply measure the outside diameter of your hose with the fitting installed. Some clamps accommodate a range of sizes, so be sure the size you need falls in the middle of that range.
More
Build-Your-Own Worm-Drive Clamps for Soft Hose and Tube
Build your own 2" diameter and larger smooth-band worm-drive clamps for hose and tube. Cut a length of band from the continuous roll and attach a housing and a screw. These clamps are best for soft hose and tube but also work with firm hose and tube.
410 stainless steel offers good corrosion resistance.
200/300 series stainless steel has very good corrosion resistance.
Note: When choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed.
For technical drawings and 3-D models, click on a part number.
Band | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Minimum Clamp ID | Length, ft. | Width | Thickness | Drive Style | Hex Size | Number of Screws and Housings | Reusable | For Use With | Each | |
200/300 Series Stainless Steel with 410 Stainless Steel Screw | ||||||||||
2" | 10 | 3/8" | 0.015" | Slotted, External Hex | 5/16" | 3 | Yes | Firm Hose, Firm Tube, Soft Hose, Soft Tube | 0000000 | 000000 |
2" | 100 | 3/8" | 0.015" | Slotted, External Hex | 5/16" | 25 | Yes | Firm Hose, Firm Tube, Soft Hose, Soft Tube | 0000000 | 000000 |
Replacement Screw and Housing | 0000000 | Each | 000000 |
Band | ||||
---|---|---|---|---|
Length, ft. | Width | Thickness | Each | |
200/300 Series Stainless Steel | ||||
100 | 1/2" | 0.02" | 0000000 | 000000 |