Clamp ID Clamp ID |
|---|
Clamp Type Clamp Type |
|---|
 | Pinch |
Maximum Clamp ID (Metric) Maximum Clamp ID (Metric) |
|---|
Pinch Clamp Style Pinch Clamp Style |
|---|
 | Single |
Minimum Clamp ID (Metric) Minimum Clamp ID (Metric) |
|---|
Material Material |
|---|
|
Insert Material Insert Material |
|---|
|
Band Width Band Width |
|---|
|
Band Thickness Band Thickness |
|---|
|
Reusable Reusable |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
About Measuring Hose and Tube Clamps
What's the best way to determine the clamp size you'll need? Simply measure the outside diameter of your hose with the fitting installed. Some clamps accommodate a range of sizes, so be sure the size you need falls in the middle of that range.
More
Vibration-Resistant Pinch Clamps for Soft Hose and Tube
A dimple in the ear creates spring-like action that allows these clamps to withstand vibration and temperature changes without loosening.
The insert bridges the gap in the ear to create a 360° seal. Install by crimping the pinch point with pinch-clamp pincers. Clamps are for use with soft hose and tube, such as silicone. They have very good corrosion resistance.
Note: When choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed.
For technical drawings and 3-D models, click on a part number.
Clamp ID Range | Band | ||||||
|---|---|---|---|---|---|---|---|
| Inch | mm | Wd. | Thick. | Reusable | Pkg. Qty. | Pkg. | |
304 Stainless Steel with 302 Stainless Steel Insert | |||||||
Single Pinch | |||||||
| 3/32" to 7/64" | 2.5 to 2.9 | 7/32" | 0.02" | No | 10 | 00000000 | 000000 |
| 7/64" to 1/8" | 2.7 to 3.1 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 7/64" to 9/64" | 2.9 to 3.7 | 7/32" | 0.02" | No | 10 | 00000000 | 00000 |
| 1/8" to 11/64" | 3.3 to 4.2 | 7/32" | 0.02" | No | 10 | 000000000 | 00000 |
| 9/64" to 3/16" | 3.7 to 4.7 | 7/32" | 0.02" | No | 10 | 00000000 | 00000 |
| 11/64" to 13/64" | 4.2 to 5.2 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 3/16" to 7/32" | 4.7 to 5.7 | 7/32" | 0.02" | No | 10 | 00000000 | 0000 |
| 13/64" to 1/4" | 5.2 to 6.2 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 15/64" to 9/32" | 5.9 to 7 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 9/32" to 21/64" | 7 to 8.2 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 5/16" to 3/8" | 8 to 9.5 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 21/64" to 25/64" | 8.5 to 10 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 11/32" to 13/32" | 8.8 to 10.5 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 3/8" to 7/16" | 9.6 to 11.3 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 27/64" to 1/2" | 10.6 to 12.6 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 29/64" to 17/32" | 11.3 to 13.3 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 31/64" to 9/16" | 12.3 to 14.3 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 35/64" to 41/64" | 13.9 to 16.1 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 37/64" to 21/32" | 14.6 to 16.8 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 5/8" to 45/64" | 15.6 to 17.8 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 43/64" to 49/64" | 17.1 to 19.3 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 3/4" to 53/64" | 18.8 to 21.1 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 51/64" to 57/64" | 20.2 to 22.8 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 29/32" to 1" | 23 to 25.6 | 7/32" | 0.02" | No | 10 | 000000000 | 00000 |
| 59/64" to 1 1/32" | 23.3 to 26.3 | 7/32" | 0.02" | No | 10 | 000000000 | 00000 |
| 1 3/64" to 1 3/16" | 26.5 to 30 | 7/32" | 0.02" | No | 10 | 000000000 | 00000 |