Maximum Temperature Maximum Temperature |
|---|
|
Bowl Material Bowl Material |
|---|
|
Flow Control Flow Control |
|---|
|
Number of Oil Outlets Number of Oil Outlets |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Bowl Diameter Bowl Diameter |
|---|
|
Overall Width Overall Width | Show |
|---|
|
Overall Width Overall Width | Hide |
|---|
Housing Material Housing Material |
|---|
|
For Maximum AGMA Viscosity Grade For Maximum AGMAViscosity Grade |
|---|
|
For Maximum ISO Viscosity Grade For Maximum ISOViscosity Grade |
|---|
|
For Maximum SAE Viscosity Grade For Maximum SAEViscosity Grade |
|---|
|
For Maximum SSU Viscosity Grade For Maximum SSUViscosity Grade |
|---|
|
Mounting Thread Size Mounting Thread Size |
|---|
|
Oil Outlet Connection Type Oil Outlet Connection Type |
|---|
|
Oil Outlet Gender Oil Outlet Gender |
|---|
|
Pressure Regulation Pressure Regulation |
|---|
|
Electrically Operated Oil Dispensers with Flow-Adjustment Valve
A solenoid automatically starts and stops flow to dispense lubricant only while equipment is running. When wired to a machine’s on/off switch, the solenoid remains closed until the machine is turned on. Turn the dial on the valve to adjust flow. Dispensers can be used with any oil grade. Flow rate depends on temperature.
Overall | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Cap. | Bowl Dia. | Ht. | Wd. | Housing Material | Bowl Material | Pressure Regulation | Max. Temp., °F | Mounting Thread Size | Each | |
120V AC 0.1A Current | ||||||||||
For 1/4" Outlet Tube OD | ||||||||||
| 2 1/2 oz. | 2" | 5 9/16" | 4 1/2" | Aluminum | Plastic | Vented | 160° | 5/8"-18 | 0000000 | 0000000 |
24V DC 0.4A Current | ||||||||||
For 1/4" Outlet Tube OD | ||||||||||
| 2 1/2 oz. | 2" | 5 9/16" | 4 1/2" | Aluminum | Plastic | Vented | 160° | 5/8"-18 | 0000000 | 000000 |
Air-Powered Grease-Dispensing Pumps
Connect these modular pumps to your air system and add a solenoid valve to automate the flow of grease. Install or remove pumps as your lubrication needs change. Mounting holes are drilled through the pump's body. Each pump has a separate flow adjustment; use a screwdriver to turn the flow-adjustment screw.
Note: For proper operation, pumps require a three-port solenoid valve (sold separately). The solenoid can be controlled by a timer or PLC (programmable logic controller).
Grease Outlet | Grease Inlet | Overall | Air Inlet | Mounting | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Number of Pumps | Cap., oz. | Ounces per Cycle, oz. | For NLGI Viscosity Grade | Max. Grease Outlet Pressure, psi | Thread Type | Pipe Size | Gender | Thread Type | Pipe Size | Gender | Ht. | Wd. | Thread Type | Pipe Size  | Gender | Hole Dia. | Fasteners Included | Each | |
| 2 | 1 1/2 | 0-0.007 | 00, 0, 1, 2 | 1,080 | NPT | 1/8 | Female | NPT | 1/8 | Female | 8 5/16" | 4 1/2" | NPT | 1/8 | Female | 9/32" | No | 0000000 | 0000000 |
| Add-On Pump, 1 1/4" Wd. | 0000000 | Each | 000000 |