Mount Type Mount Type | Show |
|---|
|
Mount Type Mount Type | Hide |
|---|
For Use With For Use With |
|---|
|
RTD Type RTD Type |
|---|
|
Connection Type Connection Type |
|---|
 | Wire Leads |
Material Material |
|---|
|
System of Measurement System of Measurement |
|---|
|
Message Type Message Type |
|---|
 |  |
| Blank | Identification |
 | |
| Tracking and Inspection |
Message Message |
|---|
|
Response Time Response Time |
|---|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Jacket Material Jacket Material |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
About Selecting Temperature Sensors
More
Single-Axis Tilt Indicators
A ball inside a level tube indicates the side-to-side tilt angle.
Overall | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Side-to-Side Tilt Angle Measuring Range | Accuracy | Graduation Marks | Numeric Increments | Lg. | Wd. | Ht. | Material | Color | Mount Type | Each | |
| 0°-6° | ±0.8° | 1° | 2° | 3 5/8" | 3/8" | 5/8" | Plastic | Black | Adhesive Back | 00000000 | 000000 |
| 0°-6° 0°-26° | ±1° ±1.2° | 1° | 2° 5° | 5 1/8" | 7/8" | 2 1/8" | Plastic | Black | Adhesive Back | 00000000 | 00000 |
| 0°-10° | ±1° | 1° | 5° | 3 1/2" | 3/8" | 1 1/2" | Plastic | Black | Adhesive Back | 00000000 | 00000 |
| 0°-15° | ±1.5° | 5° | 5° | 5" | 1/2" | 2" | Plastic | Black | Adhesive Back | 00000000 | 00000 |
| 0°-26° | ±1.2° | 1° | 5° | 5 1/8" | 1/2" | 2 1/8" | Plastic | Black | Adhesive Back | 00000000 | 00000 |
| 0°-45° | ±1.8° | 5° | 15° | 3 1/2" | 3/8" | 1 5/8" | Plastic | Black | Adhesive Back | 00000000 | 00000 |
| 0°-45° | ±1.8° | 5° | 15° | 4" | 3/8" | 1 3/4" | Plastic | Black | Adhesive Back | 00000000 | 00000 |
| 0°-50° | ±2° | 5° | 10° | 6 3/8" | 3/4" | 2 7/8" | Plastic | Black | Adhesive Back | 00000000 | 00000 |
Quick-Connect RTD Probes for Surfaces
For fast installation, the tips of these RTD probes come attached to mounting connections.
Adhesive-back probes stick to your surface and have a slim profile that fits in tight spots.
Probes with signal averaging take temperatures along the length of the probe and average them for accuracy. Use these probes to identify hot spots around cylinders, pipes, and flat surfaces without installing an immersion probe and where a point sensor may be inaccurate. One of these probes also has a braided stainless steel jacket, which protects against signal interference, corrosion, and abrasion.
Probes that meet DIN EN 60751 adhere to industry standards for accuracy. Probes that meet MIL-STD-108 are submersible, so they can monitor the temperature of water in tanks or containers.
 Style B Shown Mounted | A |
B |
Probe | Wire Lead | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RTD Type | Temperature Range, ° F | Lg. | Wd. | Thick. | Accuracy | Response Time, sec. | Jacket Material | Lg. | Gauge | No. of Wires | Specifications Met | Features | Each | ||
Wire Leads Connection—Platinum Probe | |||||||||||||||
| A | 100 ohms | -300° to 350° | 1/4" | 1/4" | 1/16" | ±0.12% | 0.15 | Polyimide | 36" | 28 | 3 | DIN EN 60751 Class B | __ | 0000000 | 0000000 |
| A | 100 ohms | -100° to 350° | 1 1/4" | 1/2" | 1/16" | ±0.5% | 0.17 | Braided Stainless Steel Armor | 36" | 26 | 3 | __ | Overtemperature Protection, Signal Averaging | 0000000 | 000000 |
| A | 100 ohms | -100° to 350° | 1 15/16" | 3/4" | 1/16" | ±0.12% | 0.1 | Polyimide | 36" | 24 | 3 | DIN EN 60751 Class B | __ | 0000000 | 000000 |
| A | 100 ohms | -80° to 400° | 1 1/4" | 1" | 1/16" | ±0.12% | 0.2 | Silicone | 36" | 24 | 3 | DIN EN 60751 Class B | __ | 0000000 | 000000 |
| A | 100 ohms | -50° to 300° | 9/16" | 3/16" | 1/16" | ±0.12% | 1.3 | Silicone | 40" | 28 | 3 | DIN EN 60751 Class B; MIL-STD-108 | __ | 0000000 | 00000 |
| A | 100 ohms | -4° to 350° | 5/8" | 3/16" | 1/16" | ±0.12% | 0.4 | Polyimide | 40" | 26 | 3 | DIN EN 60751 Class B | __ | 0000000 | 000000 |
| A | 100 ohms | -4° to 350° | 5/8" | 3/16" | 1/16" | ±0.12% | 1 | Polyimide | 40" | 26 | 3 | DIN EN 60751 Class B | __ | 0000000 | 000000 |
| A | 100 ohms | -4° to 350° | 5/8" | 5/16" | 1/16" | ±0.12% | 1.2 | Polyimide | 40" | 22 | 3 | DIN EN 60751 Class B | __ | 0000000 | 000000 |
| A | 100 ohms | -4° to 350° | 13/16" | 3/8" | 1/16" | ±0.12% | 0.9 | Polyimide | 40" | 26 | 3 | DIN EN 60751 Class B | __ | 0000000 | 000000 |
| A | 1,000 ohms | -50° to 300° | 9/16" | 3/16" | 1/16" | ±0.12% | 1.3 | Silicone | 40" | 28 | 3 | MIL-STD-108 | __ | 0000000 | 000000 |
| A | 1,000 ohms | -4° to 350° | 5/8" | 3/16" | 1/16" | ±0.12% | 0.4 | Polyimide | 40" | 26 | 2 | __ | __ | 0000000 | 000000 |
| A | 1,000 ohms | -4° to 350° | 5/8" | 3/16" | 1/16" | ±0.12% | 1 | Polyimide | 40" | 26 | 2 | __ | __ | 0000000 | 000000 |
| A | 1,000 ohms | -4° to 350° | 5/8" | 5/16" | 1/16" | ±0.12% | 1.2 | Polyimide | 40" | 22 | 2 | __ | __ | 0000000 | 000000 |
| A | 1,000 ohms | -4° to 350° | 13/16" | 3/8" | 1/16" | ±0.12% | 0.9 | Polyimide | 40" | 26 | 2 | __ | __ | 0000000 | 000000 |
| B | 100 ohms | -80° to 400° | 4" | 3/8" | 1/16" | ±0.12% | 0.6 | Silicone | 36" | 26 | 3 | DIN EN 60751 Class B | Signal Averaging | 0000000 | 000000 |
Quick-Connect Thermocouple Probes for Surfaces
The probe tips come attached to mounting connections for fast installation.
Note: When installing probes with wire leads, the red wire is negative.
Adhesive-back probes stick to your surface and have a slim profile that fits in tight spots.
Material | Wire | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thermocouple Type | Temperature Range, ° F | Probe Lg. | Accuracy | Response Time, sec. | Connection Type | Sensor Type | Insulation | Jacket | Lead Lg. | Gauge | Wd. | Thick. | Each | |
Polyimide Probe | ||||||||||||||
| J | 32° to 400° | 1 1/4" | ±0.75% | 2 | Wire Leads | Exposed | Fiberglass | Fiberglass | 48" | 30 | 1" | 1/16" | 0000000 | 000000 |
| K | 32° to 400° | 1 1/4" | ±0.75% | 2 | Wire Leads | Exposed | Fiberglass | Fiberglass | 48" | 30 | 1" | 1/16" | 0000000 | 00000 |
| T | 32° to 400° | 1 1/4" | ±0.75% | 2 | Wire Leads | Exposed | Fiberglass | Fiberglass | 48" | 30 | 1" | 1/16" | 0000000 | 00000 |
Strain Gauges
Glue these gauges onto a structure to measure strain in a single direction. They’re often used in structural testing and monitoring applications. Strain is the deformation or displacement of material caused by force.
Solder wire leads onto gauges with solder terminals after the gauge has bonded to your surface. After soldering, apply a protective coating.
Gauges with wire leads save you the effort of soldering wire to the gauge and checking to see that it’s bonded securely.
Grid | Overall | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Resistance, ohms | Accuracy | Length | Width | Length | Width | Wire Lead Length, ft. | Material | Temperature Range, °F | Pkg. Qty. | Pkg. | |
Solder Terminals | |||||||||||
For Use With Cast Iron, Composites, Printed Circuit Board, Steel | |||||||||||
| 350 | ±0.2% | 0.125" | 0.1" | 0.275" | 0.12" | __ | C70600 Copper Nickel | -100° to 350° | 5 | 0000000 | 000000 |
Two Wire Leads | |||||||||||
For Use With Aluminum, Brass, Tin | |||||||||||
| 120 | ±0.3% | 0.235" | 0.1" | 0.301" | 0.1" | 3 | C70600 Copper Nickel | -60° to 180° | 10 | 0000000 | 000000 |
| 350 | ±0.3% | 0.06" | 0.1" | 0.166" | 0.13" | 3 | C70600 Copper Nickel | -60° to 180° | 10 | 0000000 | 000000 |
| 350 | ±0.3% | 0.235" | 0.1" | 0.301" | 0.1" | 3 | C70600 Copper Nickel | -60° to 180° | 10 | 0000000 | 000000 |
For Use With Cast Iron, Composites, Printed Circuit Board, Steel | |||||||||||
| 120 | ±0.3% | 0.06" | 0.1" | 0.166" | 0.13" | 3 | C70600 Copper Nickel | -60° to 180° | 10 | 0000000 | 000000 |
| 120 | ±0.3% | 0.125" | 0.1" | 0.205" | 0.1" | 3 | C70600 Copper Nickel | -60° to 180° | 10 | 0000000 | 000000 |
| 120 | ±0.3% | 0.235" | 0.1" | 0.301" | 0.1" | 3 | C70600 Copper Nickel | -60° to 180° | 10 | 0000000 | 000000 |
| 350 | ±0.3% | 0.06" | 0.1" | 0.166" | 0.13" | 3 | C70600 Copper Nickel | -60° to 180° | 10 | 0000000 | 000000 |
| 350 | ±0.3% | 0.125" | 0.1" | 0.205" | 0.1" | 3 | C70600 Copper Nickel | -60° to 180° | 10 | 0000000 | 000000 |
For Use With Composites, Nickel Iron, Titanium Silicate | |||||||||||
| 350 | ±0.3% | 0.235" | 0.1" | 0.301" | 0.1" | 3 | C70600 Copper Nickel | -60° to 180° | 10 | 0000000 | 000000 |
Three Wire Leads | |||||||||||
For Use With Aluminum, Brass, Tin | |||||||||||
| 350 | ±0.2% | 0.03" | 0.063" | 0.095" | 0.063" | 3 | Nickel Chromium | -100° to 400° | 1 | 0000000 | 00000 |
For Use With Cast Iron, Composites, Printed Circuit Board, Steel | |||||||||||
| 350 | ±0.2% | 0.03" | 0.063" | 0.095" | 0.063" | 9 | Nickel Chromium | -100° to 400° | 1 | 0000000 | 00000 |
| 350 | ±0.3% | 0.06" | 0.1" | 0.166" | 0.13" | 9 | C70600 Copper Nickel | -60° to 180° | 10 | 0000000 | 000000 |
For Use With Composites, Nickel Iron, Titanium Silicate | |||||||||||
| 350 | ±0.3% | 0.235" | 0.1" | 0.301" | 0.1" | 9 | C70600 Copper Nickel | -60° to 180° | 10 | 0000000 | 000000 |
Container | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temperature Range, °F | For Use On | Includes | Each | |
| 1 | Bottle | 1 min. | 5 min. | Thin Liquid (130 cP) | -25° to 150° | Aluminum, Composites, Glass, Steel | Catalyst | 0000000 | 000000 |
| Width | Length, ft. | Color | Temperature Range | Features | Each | |
| 3/4" | 216 | Clear | 400° F | Tape Dispenser | 0000000 | 0000000 |
Dry Time | |||||
|---|---|---|---|---|---|
| Container Size, fl. oz. | Touch, min. | Overall, hrs. | Pkg. Qty. | Pkg. | |
| 1 | 20 | 2 | 4 | 0000000 | 000000 |
Tamper-Evident Property Identification Labels
These labels cannot be removed without visible evidence of tampering—they rip and leave residue when peeled. Write on them to label equipment with a company name and address or ID number.
| Ht. | Wd. | Thick. | Color | Message Color | Mount Type | Material | Pkg. Qty. | Pkg. | |
| 3/4" | 1 1/2" | 0.002" | Black | White | Adhesive Back | Vinyl Plastic | 10 | 000000000 | 000000 |
Tamper-Seal Labels
You’ll know instantly if someone has peeled off these security labels. When removed, the adhesive separates from the backing to reveal the words "Open" and "Void". Not offered in blank for security reasons.