More customizable than standard indicators, these digital indicators have programmable features that help you adapt them to your application. Like other indicators, they track your machine component as it moves along a rotating spindle, lead screw, or other threaded shaft, which helps you adjust machinery with speed and precision. This saves time and prevents errors on process lines that you constantly adapt for different products, such as packaging lines.

Program the number you want added per revolution—you can use these indicators as a reference point or as a true measure of distance. To measure distance, match the indicator’s count per revolution to your lead screw’s threads per inch or thread pitch. You can adjust them to count from their original position or from their most recent stopping point, which is useful for repeating moves. They also have settings to work with clockwise and counterclockwise rotation, as well as vertical and horizontal shafts.

Rated IP67, all are sealed against dust and water, even if briefly submerged. They meet IEC 61326-1, which is an international standard for electromagnetic immunity and emissions.

Add shaft reducer bushings to adapt indicators to fit small diameter shafts. Stainless steel bushings are more corrosion resistant than black-oxide steel bushings, so they’re better in humid locations.

For technical drawings and 3-D models, click on a part number.

Display running time on a machine so you can schedule preventative maintenance.

Non-resettable counters prevent tampering and accidental loss of data.

Display running time on a machine so you can schedule preventative maintenance. These counters have two displays. One display shows the total running time and cannot be reset; the other shows the time elapsed since the last maintenance and can be wired for remote reset. The output relay turns on an indicator light and sends a signal to another device when the counter reaches a set point. The signal can start/stop a process or trigger an alarm.

Wire these counters/ratemeters to an electrical pulse-emitting switch, sensor, or encoder to count input while tracking rates in units such as gallons per minute. A scaling function lets you adjust the unit of measure to suit your application. Use the toggle button to switch between the count and the rate. Counter/ratemeter is protected from dust and washdowns and can be used outdoors (rated IP65).

For technical drawings and 3-D models, click on a part number.

For quick installation, these counters fit standard DIN panel cutouts. Wire them up to an electrical pulse-emitting switch, sensor, or encoder for use on machine tools, packaging machinery, or other equipment.

Press-on counters have a front panel that is rated NEMA 4 and IP66 for protection against dust and washdowns and outdoor use. The screw terminals are rated IP20.

For technical drawings and 3-D models, click on a part number.

For quick installation, this counter fits standard DIN panel cutouts. Wire it up to an electrical pulse-emitting switch, sensor, or encoder for use on machine tools, packaging machinery, or other equipment. An output relay sends a signal to another device when the counter reaches a set point. The signal can start/stop a process or trigger an alarm. A gasket provides protection from direct water sprays (meets IP65). UL Recognized Component, C-UL Recognized Component, and CE marked, this counter meets American, Canadian, and European safety standards.