System of Measurement System of Measurement |
|---|
|
Thread Type Thread Type | Show |
|---|
|
Threaded Insert Type Threaded Insert Type |
|---|
 |  |
| Thread Locking | Helical |
Thread Spacing Thread Spacing |
|---|
|
For Use In For Use In |
|---|
|
Material Material |
|---|
|
Thread Direction Thread Direction |
|---|
 | |
For Tap Thread Size For Tap Thread Size |
|---|
|
End Type End Type |
|---|
|
Tensile Strength Tensile Strength |
|---|
|
For Tap Type For Tap Type |
|---|
|
Passivation Passivation |
|---|
|
Helical Insert Style Helical Insert Style |
|---|
|
Drill Bit Size Drill Bit Size |
|---|
|
External Locking Type External Locking Type |
|---|
|
Finish Finish |
|---|
|
For Maximum Hole Diameter For Maximum Hole Diameter |
|---|
|
Thread Fit Thread Fit |
|---|
|
Black-Phosphate Steel Easy-to-Install
Thread-Locking Inserts
A black-phosphate finish provides mild corrosion resistance. Also known as E-Z Lok, these inserts use Loctite® adhesive to keep them in place. The adhesive reaches full strength after 72 hours. Installation requires a drill bit and a standard tap. Then set the insert with a bolt and two nuts, or use an installation bit.
Choose inserts with a thick wall for greater strength than thin-wall inserts, or to fill a large hole.
For technical drawings and 3-D models, click on a part number.
Spark Plug Thread Repair Kits for
Gasket-Seat and Taper-Seat Ports
These kits have short-, normal-, and long-reach inserts, an installation tool, and a tap.
| Includes | No. of Inserts Included | Each | |
18-8 Stainless Steel | |||
|---|---|---|---|
| M14×1.25 mm Thread × Short Insert Reach (1 Each) M14×1.25 mm Thread × Normal Insert Reach (1 Each) M14×1.25 mm Thread × Long Insert Reach (1 Each) Through-Hole Tap Installation Tool | 3 | 000000000 | 000000 |
| M14×1.25 mm Thread × Short Insert Reach (6 Each) M14×1.25 mm Thread × Normal Insert Reach (6 Each) M14×1.25 mm Thread × Long Insert Reach (6 Each) Through-Hole Tap Installation Tool | 18 | 000000000 | 00000 |
Spark Plug Thread Repair Kits
Kits include helical inserts, a tap, and an installation tool. Also known as Heli-Coil inserts, they have coils that expand once installed to securely anchor the insert. All have a prong for ease of installation. An installation tool grips the prong and reduces the coil diameter, enabling the insert to fit in tapped holes. Remove the prong to insert the screw.
| Includes | No. of Inserts Included | Each | |
18-8 Stainless Steel | |||
|---|---|---|---|
| M14×1.25 mm Thread × 3/8" Insert Reach (6 Each) M14×1.25 mm Thread × 7/16" Insert Reach (6 Each) M14×1.25 mm Thread × 0.472" Insert Reach (6 Each) M14×1.25 mm Thread × 1/2" Insert Reach (6 Each) M14×1.25 mm Thread × 3/4" Insert Reach (6 Each) Through-Hole Tap Installation Tool | 30 | 000000000 | 0000000 |
| M18×1.5 mm Thread × 1/2" Insert Reach (24 Each) Through-Hole Tap Installation Tool | 24 | 000000000 | 000000 |